|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
I have a phono pre-amp board that I pulled from a Creek amp that I want to run independently from that amp. (I gave the amp to my son, but he has no interest in vinyl.) The marking on the main board in the amp says +25v and -25v on 2 traces, and the inputs and outputs are clear.What would be a decent, easy and cheap power supply for this? I would assume that a +/-24v supply would be a standard, but one volt short but still OK. My line voltage is high anyway so anything that I use would probably be over voltage anyway. I've checked the Mouser catalog, but that only confuses me. There are too many options, both in Mouser and elsewhere, and I don't know what works and what doesn't. Battery? Regulated? Wall Wart? Built up? Rat Shack?
Any advice?
This post is made possible by the generous support of people like you and our sponsors:
Topic - 24v power supply - zacster 18:41:51 10/10/05 (11)
- Re: 24v power supply - reuben 11:18:51 10/11/05 (3)
- Re: 24v power supply - zacster 14:16:28 10/11/05 (2)
- post a pix and we'll let you know :) - tommytube 07:54:23 10/12/05 (1)
- Re: post a pix and we'll let you know :) - zacster 16:31:30 10/12/05 (0)
- Re: 24v power supply - tommytube 11:14:58 10/11/05 (2)
- mouser link to a dual linear - tommytube 11:16:29 10/11/05 (1)
- Thanks, that looks good (nt) - zacster 14:17:11 10/11/05 (0)
- Re: 24v power supply - pkell44 08:42:41 10/11/05 (0)
- Re: 24v power supply - Kal Rubinson 19:12:36 10/10/05 (2)
- Re: 24v power supply - pkell44 08:45:44 10/11/05 (1)
- Yup. - Kal Rubinson 09:29:48 10/11/05 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
