|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: Micro-Bearing Conductive Steel Fill Material by Star Sound posted by Steve M. on July 29, 2005 at 07:50:02:
Hi Steve,
When used in stands, you would not want to "fill em' up" rather fill them about 1/8-1/4. This will allow the rest of the stand to resonate to a point and the Micro Bearing will transmit the energy out of the stand.
I have used this in many applications including speaker stands, inside speakers (doubled in ziplog bags) and in larger speakers that have a sub chamber for just this type of material such as the larger Usher speakers.My opinion... it works wonders but how much to use will be a mater of trial & error. For instance, in a large pair of floorstanding speakers with a bottom chamber that was 5 inches in height, I found the best results with 1/2" of Micro.
As they say, YMMV.
Happy Listening
Response34
Build your system for yourself not the critics
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: Micro-Bearing Conductive Steel Fill Material by Star Sound - Response34 17:16:01 07/31/05 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
