|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: Isolation Devices Binge - Nearing the Finish Line (long) posted by zog on December 1, 2004 at 10:37:31:
When using the pucks together with the cones, how are they set up? Do you place the puck on the shelf and the cone between the source component and the puck, or vice versa? Also, do you keep the cone pointing down as would be the case when it's used alone or do you reverse the orientation so that the tip is pointing up?Thanks in advance,
Joe Appierto
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- BDR Pucks and Cones - Joe Appierto 16:41:14 12/01/04 (4)
- Wouldn't you just know "It all depends..." :-) - David Aiken 21:35:15 12/01/04 (1)
- Thanks for the info, I'll try and see what works best for me (NT) - Joe Appierto 16:18:59 12/02/04 (0)
- Re: BDR Pucks and Cones - zog 18:06:57 12/01/04 (1)
- Yes, very helpful...thank you... - Joe Appierto 18:17:40 12/01/04 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
