|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: its a mess posted by rhyno on June 10, 2004 at 12:35:14:
If you strip it, then refinish it with automotive acrylic enamel paint WITH the proper primer. Note that while this paint dries in a few hours it isn't fully hardened for about 30 days - enamels cure by absorption of oxygen from the air which takes time. So you'll have to set the unit aside for a while. But be patient or you'll damage the new finish.Follow the instructions that come with the paint. The "plasti-kote" brand works quite well, BTW.
When you are done you'll have a much better finish than you can get with "hobby" paints. And it will take the tranny heat - feel the temp of a car finish on a hot sunny day and you'll know the heat is no problem.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: its a mess - Jim McShane 14:09:07 06/10/04 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
