|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: ? cut 18" wheels from 3/4" plywood for Jon Risch Bass Traps? posted by petew on July 19, 2000 at 11:01:38:
Even though I have a router, and other tools, I used a skillsaw/sabresaw type of electric saw, with a wood blade, and marked out the circle and cut it free hand after drilling a starting hole.Often, you can get your wood cut at a lumberyard or hardware store if you ask to have it cut when you buy it (or keep your receipt for later). There is usually a nominal fee, but it is not too much, and they do prevent you from cutting yuour fingers off, while usually doing a decent job.
Jon Risch
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: ? cut 18" wheels from 3/4" plywood for Jon Risch Bass Traps? - Jon Risch 21:45:08 07/19/00 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
