|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
|
|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
In Reply to: Re: Looking for a GOOD 211 / VT4-C Schematic posted by Super_BQ on July 18, 2003 at 01:17:14:
Actually the power output at higher voltages in the case of the 211 is usually lower because to get power out of a 211 you must use A2. Just answering on the fly I'd expect to see perhaps as little as 15 watts, very unlikely 20 watts, but 10 watts is sufficient for your needs. This is good because it possibly allows a "better" valve choices elsewhere. There is nothing worse than having to use valves because of their parameters rather than their sound.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: Looking for a GOOD 211 / VT4-C Schematic - Paul Barker 01:02:43 07/19/03 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
