![]() ![]() |
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
181.214.227.44
In Reply to: RE: 22ohm resistors on hum pot posted by Tre' on April 27, 2021 at 06:25:59
thanks for the reply Tre... the 22 ohm resistors are on the hum pot outer wipers to the center wiper... yes dc on the 300B filaments using Schottky diodes and a Hammond choke... it would seem that tentlabs filament supplys may be the way to go..
Follow Ups:
I had 100 ohm hum pots on the 300Bs, AC heated. Then I built LCRCL DC supplies using critical inductance input chokes. At that point it no longer mattered where I set the hum pot, no hum. So I got rid of the hum pots and just use 22 ohm resistors to create the "cathode" connections.
Tre'
Have Fun and Enjoy the Music
"Still Working the Problem"
thanks for the explaining... I am using the hum pot with no 22 ohm resistors... it would seem that I should add them...
They will make the adjustment more precise but also draw more current from the filament supply.
Tre'
Have Fun and Enjoy the Music
"Still Working the Problem"
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: