|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
98.249.87.53
In Reply to: RE: My bad! 620 Ohms not 63 primary resistance posted by DAK on September 23, 2014 at 16:02:07
I googled around some and found your transformer number matches up with a Zenith console amp 3D32. There may be other Zenith amps that used the same transformer as well. Here is what one person did with the amp, including the schematic he used. Hope this helps.
His schematic is
http://www.angelfire.com/vt/audio/se6bq5schem.gif
Follow Ups:
Thanx for the tip. Yep the pictures are spot on. In my amp I will be using the RH84 schematic. I still don't understand the purpose of the dual secondaries. cheers, Dak
Sometimes it's that way with repurposed iron. If you had the original schematic, it might become clearer, or maybe not. I couldn't find a free original schematic, but it may be out there. Tom Bavis is probably right that it had to do with humbucking.
The main thing is to make sure you identify the phase of the two windings so you don't have them "fighting" each other if you use both. Or just use one and insulate the other. Have fun!
RH84 gets good reviews. I may try that one myself one day. Let us know how it comes out.
John
I have made 2 identical RH84 on the same RCA console amps and they turned out very nice sounding. I was pleasantly surprised since the circuit is rather simple. I made a pair of monoblocks that were stereo/mono switchable so I could double the power. I found that was just an ok situation. But in stereo they are a great sounding amp. cheers, Dak
Post a Followup:
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: