|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
97.135.33.160
In Reply to: RE: Hornresp 1st pass - comments/critiques welcome. 40hz "L" horn posted by tomservo on January 07, 2024 at 12:22:12
Did you re-use the 800 or 500 Hz. horn with the new driver?
Follow Ups:
Hi
Yes i did, it was the 511. I did change a couple things other than to the 4550 and 2226 drivers.
There was a spot on the back side of the vertical flare in front of the flat flange that had "sensitive" spot i put some damping material on.
There was a spot mid point on the woofer flare that had a resonance where i glued a brace to the outer cabinet wall. The baffle at the bottom (bare plywood in the picture elsewhere) for the woofer port was added after measuring the box sealed (i didn't want to try and calculate the volume when i can measure it's effect).
When trying to work out a crossover, i found if i moved the horn back an inch and a half, could get a Synergy style crossover with very little or no XO phase shift.
This was a long time ago, i don't have a measurement file in the folder for it but i know i did once haha. Red scale is phase, + - 180 degrees scale. Crossover is about the center left to right
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: