|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
24.76.173.32
These things work great. They are stiff enough to use either dry or sprayed with a contact cleaner. You can use your fingers or they also work well in the super small size variable Dremel collet. My Dremel is somewhat modified so I use a very slow speed.
The 2 sizes that worked well for me was the red coded 110 and the black coded 140.
As you can see in the pic, I used a couple of the red coded in the umbilical female power socket until they came clean.
The black coded fit nicely in the small tube socket.
There are 6 different sizes in the kit I purchased. 100 pieces in total. They are tapered and long enough that I can trim them to the desired diameter so I can use most of them.
Pretty happy with this. Thought I would pass on.
Cheers!
Jonesy
"I know just enough to get into trouble. But not enough to get out of it."
Follow Ups:
Did you buy the 6 size kit by Meta Labwear from Amazon for $13?
I'm in Canada and this link is what I purchased. No affiliation.
I didn't have any luck on Amazon or eBay finding the larger grit sizes #90-140. It looks like similar packaging as on Amazon, except for the sizes.
Jonesy
"I know just enough to get into trouble. But not enough to get out of it."
Great idea....thank you.
nt
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: