Welcome! Need support, you got it. Or share your ideas and experiences.
Return to MagneQuest/Peerless Forum
75.27.136.161
In Reply to: RE: FS-030 Wiring Diagram posted by srivenkat on September 01, 2017 at 20:45:01
Follow Ups:
MSL
Builder of MagneQuest & Peerless transformers since 1989
Thanks a lot for sharing the wiring details.
I am thinking of having both 8 & 16 ohms tap so I can connect 8 or 16 ohms speakers. But, according to this sheet, not sure whether I can have both 8 & 16 ohms tap.
Can I do this?
Thank you,
Sri
If you use a rotary switch, you can have 4, 8, and 16 Ohms. I have built several amps with the ES-025's (same wiring configuration as the FS-030), and with a 4P3T rotary switch, I was able to switch everything as required and I had a spare set of contacts to change the feedback resistor so it was consistent between secondary configurations.
Good idea, thank you so much. I will do the same.
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: