|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
|
|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
In Reply to: Re: Music or Ripple ?? That is the question..... posted by drlowmu on March 12, 2007 at 16:33:59:
Thanks Jeff, OK, I thought the BW was "wider" with a resistor, but wasn't sure the dcr was contrary to the rest of the effort. I too, like the "idea" of "pure" triodes. I like 6p5, 6j5, etc...But the C3o is a surprising devise, a little on the bright side, perhaps due to the low Rp. Now, to load a 6P5 "properly" I'm assuming a 50K plate resistor, so I'll have a 250V drop at 5ma idle current, so I'd need at least 450-500 VDC to start with?
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: Music or Ripple ?? That is the question..... - bobbyj 17:52:13 03/12/07 (1)
- Re-read This Post ! - drlowmu 13:48:15 03/13/07 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
