Tube DIY Asylum

Do It Yourself (DIY) paradise for tube and SET project builders.

For Sale Ads

FAQ / News / Events

Caution! Before attempting modifications yourself, please review our Tube/DIY Safety and Disclaimer.

Sponsored Links

VH Audio - Cables, Tweaks, Accessories and DIY Parts

AudioAsylum Trader

WAVAC MD-805m Tube Monoblocks - WAVAC MD805m Tube Monoblocks in Great Condition fo...

Quicksilver Horn Mono - ***UPDATE*** There have been some corrections to t...

Octal Socket recommendations for under-chassis mounting - caffeinator 07:48:04 08/18/20 (7)
- Found something close - may be helpful to others - caffeinator 10:37:11 08/18/20 (0)
- RE: Octal Socket recommendations for under-chassis mounting - Jonesy 10:08:54 08/18/20 (5)
  - Thanks - I have some similar to those - was looking for - caffeinator 10:19:44 08/18/20 (4)
    - RE: Thanks - I have some similar to those - was looking for - Jonesy 10:23:53 08/18/20 (3)
      - or something like these ..... - tubejack 03:42:38 08/19/20 (2)
        
        Thank you all! - caffeinator 09:28:09 08/19/20 (0)
        
        RE: or something like these ..... - Jonesy 04:08:54 08/19/20 (0)
Pop quiz. ASL 1006 SET mono 845 amp, what's missing? - Tre' 15:40:43 08/16/20 (31)
- I am totally wrong about this amp - Tre' 08:11:16 08/18/20 (13)
  - RE: I am totally wrong about this amp - engineer@baymoon 17:04:11 08/22/20 (3)
    - RE: I am totally wrong about this amp - Tre' 17:29:11 08/22/20 (2)
      - don't be ashamed - Story 17:29:54 08/23/20 (1)
        
        Thanks. nt - Tre' 18:13:34 08/23/20 (0)
  - Might explain the hum... - Ivan303 05:56:43 08/19/20 (6)
    - RE: Might explain the hum... - Tre' 08:25:37 08/19/20 (5)
      - RE: Might explain the hum... - elblanco 09:30:07 08/20/20 (4)
        
        RE: Might explain the hum... - Tre' 14:56:00 08/20/20 (3)
        
        RE: Might explain the hum... - elblanco 18:23:49 08/20/20 (0)
        
        you're welcome - elblanco 17:13:10 08/20/20 (1)
        
        RE: you're welcome - Tre' 18:31:07 08/20/20 (0)
  - Not waste: learning. Glad you got it sorted! nt. - 91derlust 00:39:39 08/19/20 (1)
    - That's very kind of you. Thanks. - Tre' 08:18:52 08/19/20 (0)
- Update, this has to be the weirdest thing I've ever seen - Tre' 20:13:59 08/17/20 (3)
  - RE: sell it ... - deathtube 667 06:44:09 08/18/20 (1)
    - If it was mine I would - Tre' 16:59:47 08/18/20 (0)
  - RE: Update, this has to be the weirdest thing I've ever seen - Story 06:39:57 08/18/20 (0)
- RE: Pop quiz. ASL 1006 SET mono 845 amp, what's missing? - Story 16:40:25 08/16/20 (12)
  - RE: Pop quiz. ASL 1006 SET mono 845 amp, what's missing? - Tre' 17:13:45 08/16/20 (11)
    - RE: Pop quiz. ASL 1006 SET mono 845 amp, what's missing? - Story 03:32:11 08/17/20 (10)
      - RE: Pop quiz. ASL 1006 SET mono 845 amp, what's missing? - 91derlust 14:09:38 08/17/20 (0)
      - RE: Pop quiz. ASL 1006 SET mono 845 amp, what's missing? - Tre' 06:55:52 08/17/20 (8)
        
        After a little repair..... - Tre' 08:25:39 08/17/20 (7)
        
        BTW - Story 11:33:21 08/17/20 (6)
        
        RE: BTW - Tre' 13:11:53 08/17/20 (5)
        
        RE: BTW - Story 13:49:10 08/17/20 (4)
        
        RE: BTW - Tre' 13:58:36 08/17/20 (3)
        
        Weird for sure. nt - 91derlust 14:11:50 08/17/20 (0)
        
        RE: BTW - Story 14:06:05 08/17/20 (1)
        
        RE: BTW - Tre' 14:15:54 08/17/20 (0)
Amp Issue - Stuben 14:05:37 08/14/20 (3)
- RE: Amp Issue - Paul Joppa 18:54:20 08/14/20 (2)
  - RE: Amp Issue - Stuben 10:10:26 08/15/20 (0)
  - RE: Amp Issue - Stuben 05:54:27 08/15/20 (0)
single primary or dual primary for PT - dcal40@aol.com 16:46:17 08/13/20 (5)
- RE: single primary or dual primary for PT - xaudiomanx 17:12:02 08/14/20 (2)
  - RE: single primary or dual primary for PT - dcal40@aol.com 17:39:11 08/14/20 (1)
    - RE: single primary or dual primary for PT - xaudiomanx 12:32:06 08/17/20 (0)
- RE: single primary or dual primary for PT - Chip647 20:53:11 08/13/20 (1)
  - RE: single primary or dual primary for PT - 6bq5 10:59:58 08/14/20 (0)
Input transformer - vetmedrobert@gmail.com 12:51:44 08/13/20 (65)
- RE: Input transformer - Boli46 01:41:00 08/14/20 (3)
  - RE: Input transformer - vetmedrobert@gmail.com 06:40:13 08/14/20 (2)
    - RE: Input transformer - Stephen R 09:08:30 08/14/20 (1)
      - RE: Input transformer - vetmedrobert@gmail.com 09:34:39 08/14/20 (0)
- schematic? - elblanco 14:11:45 08/13/20 (17)
  - RE: schematic? - vetmedrobert@gmail.com 14:16:02 08/13/20 (16)
    - RE: schematic? - elblanco 14:20:52 08/13/20 (15)
      - RE: schematic? - vetmedrobert@gmail.com 14:28:45 08/13/20 (14)
        
        RE: schematic? - elblanco 14:42:00 08/13/20 (11)
        
        RE: schematic? - vetmedrobert@gmail.com 14:52:37 08/13/20 (10)
        
        RE: schematic? - elblanco 15:22:42 08/13/20 (1)
        
        RE: schematic? - vetmedrobert@gmail.com 15:29:05 08/13/20 (0)
        
        RE: schematic? - Stephen R 15:20:55 08/13/20 (2)
        
        RE: schematic? - vetmedrobert@gmail.com 15:37:01 08/13/20 (1)
        
        RE: schematic? - Stephen R 01:20:46 08/14/20 (0)
        
        RE: schematic? - kobasa@xs4all.nl 15:09:38 08/13/20 (4)
        
        RE: schematic? - vetmedrobert@gmail.com 15:18:06 08/13/20 (1)
        
        RE: schematic? - kobasa@xs4all.nl 23:22:50 08/13/20 (0)
        
        RE: schematic? - kobasa@xs4all.nl 15:13:38 08/13/20 (1)
        
        RE: schematic? - vetmedrobert@gmail.com 15:25:49 08/13/20 (0)
        
        RE: schematic? - kobasa@xs4all.nl 14:30:21 08/13/20 (1)
        
        RE: schematic? - vetmedrobert@gmail.com 14:37:28 08/13/20 (0)
- RE: Input transformer - Stephen R 13:06:52 08/13/20 (32)
  - RE: Input transformer - vetmedrobert@gmail.com 13:52:28 08/13/20 (31)
    - RE: Input transformer - Paul Joppa 20:25:56 08/13/20 (27)
      - RE: Input transformer - vetmedrobert@gmail.com 06:31:05 08/14/20 (26)
        
        RE: Input transformer - Paul Joppa 09:31:37 08/14/20 (25)
        
        RE: Input transformer - vetmedrobert@gmail.com 10:00:03 08/14/20 (24)
        
        RE: Input transformer - Paul Joppa 18:47:06 08/14/20 (21)
        
        RE: Input transformer - vetmedrobert@gmail.com 06:58:22 08/15/20 (19)
        
        RE: Input transformer - Boli46 03:09:15 08/16/20 (18)
        
        RE: Input transformer - vetmedrobert@gmail.com 07:22:51 08/16/20 (16)
        
        RE: Input transformer - Boli46 09:55:50 08/16/20 (14)
        
        RE: Input transformer - vetmedrobert@gmail.com 11:00:04 08/16/20 (13)
        
        RE: Input transformer - kobasa@xs4all.nl 11:33:59 08/16/20 (12)
        
        RE: Input transformer - Boli46 00:26:31 08/17/20 (11)
        
        RE: Input transformer - kobasa@xs4all.nl 03:07:47 08/17/20 (10)
        
        RE: Input transformer - Boli46 04:43:21 08/17/20 (9)
        
        RE: Input transformer - kobasa@xs4all.nl 06:20:45 08/17/20 (8)
        
        RE: Input transformer - Boli46 10:15:49 08/17/20 (7)
        
        RE: Input transformer - kobasa@xs4all.nl 10:49:57 08/17/20 (6)
        
        RE: Input transformer - Boli46 01:44:37 08/18/20 (5)
        
        RE: Input transformer - kobasa@xs4all.nl 05:38:39 08/18/20 (4)
        
        RE: Input transformer - Boli46 02:10:36 08/19/20 (1)
        
        RE: Input transformer - kobasa@xs4all.nl 03:41:31 08/19/20 (0)
        
        RE: Input transformer - shane. 23:28:41 08/18/20 (1)
        
        RE: Input transformer - kobasa@xs4all.nl 00:37:33 08/19/20 (0)
        
        RE: Input transformer - kobasa@xs4all.nl 07:41:24 08/16/20 (0)
        
        RE: Input transformer - kobasa@xs4all.nl 03:50:28 08/16/20 (0)
        
        RE: Input transformer - kobasa@xs4all.nl 00:12:24 08/15/20 (0)
        
        RE: Input transformer - kobasa@xs4all.nl 11:59:05 08/14/20 (1)
        
        RE: Input transformer - vetmedrobert@gmail.com 12:53:37 08/14/20 (0)
    - RE: Input transformer - Stephen R 14:03:20 08/13/20 (2)
      - RE: Input transformer - vetmedrobert@gmail.com 14:12:08 08/13/20 (1)
        
        2 stage DHT 46)300b - andy evans 05:55:13 08/14/20 (0)
- RE: Input transformer - kobasa@xs4all.nl 13:02:06 08/13/20 (9)
  - RE: Input transformer - vetmedrobert@gmail.com 13:42:26 08/13/20 (8)
    - RE: Input transformer - kobasa@xs4all.nl 13:53:13 08/13/20 (7)
      - RE: Input transformer - vetmedrobert@gmail.com 14:05:33 08/13/20 (6)
        
        RE: Input transformer - kobasa@xs4all.nl 14:17:14 08/13/20 (5)
        
        RE: Input transformer - vetmedrobert@gmail.com 14:22:44 08/13/20 (4)
        
        RE: Input transformer - kobasa@xs4all.nl 14:28:26 08/13/20 (3)
        
        RE: Input transformer - vetmedrobert@gmail.com 14:34:31 08/13/20 (2)
        
        RE: Input transformer - kobasa@xs4all.nl 14:45:29 08/13/20 (1)
        
        RE: Input transformer - vetmedrobert@gmail.com 15:05:17 08/13/20 (0)
EL-95 amplifier - Ralph 13:22:49 08/11/20 (10)
- RE: EL-95 amplifier - Eli Duttman 12:45:21 08/13/20 (2)
  - RE: Tell me more about that semiconductor - Ralph 14:02:08 08/13/20 (1)
    - RE: Tell me more about that semiconductor - Eli Duttman 15:27:55 08/13/20 (0)
- RE: EL-95 amplifier - 6bq5 15:35:27 08/11/20 (6)
  - RE: Those amps are far too large! - Ralph 11:54:32 08/12/20 (5)
    - RE: Those amps are far too large! - 6bq5 12:01:35 08/12/20 (4)
      - RE: I've not decided on the form factor - Ralph 12:09:45 08/12/20 (3)
        
        RE: I've not decided on the form factor - 6bq5 12:18:50 08/12/20 (2)
        
        RE: One of my employess built a 6K6 amp for his dad - Ralph 12:32:09 08/12/20 (1)
        
        RE: One of my employess built a 6K6 amp for his dad - 6bq5 13:14:22 08/12/20 (0)
Got a cathode resistor dropping 70V on a 300B... - Ivan303 16:52:44 08/10/20 (8)
- RE: Got a cathode resistor dropping 70V on a 300B... - 91derlust 02:14:05 08/13/20 (4)
  - They're getting a 100V - Ivan303 06:04:12 08/13/20 (3)
    - Maybe not! - Ivan303 18:28:06 08/13/20 (1)
      - Nice find. - 91derlust 22:46:41 08/13/20 (0)
    - RE: They're getting a 100V - kobasa@xs4all.nl 13:30:40 08/13/20 (0)
- RE: Got a cathode resistor dropping 70V on a 300B... - kobasa@xs4all.nl 13:16:15 08/11/20 (0)
- RE: Got a cathode resistor dropping 70V on a 300B... - elblanco 08:41:22 08/11/20 (0)
- Absolutely fine (nt) - Chip647 18:05:46 08/10/20 (0)
Tube Life in Triode or Tetrode - BIOMAN 05:21:27 08/06/20 (10)
- Wrong question - Cpwill 05:41:08 08/11/20 (0)
- RE: Tube Life in Triode or Tetrode - hahax@verizon.net 20:00:38 08/06/20 (0)
- RE: Tube Life in Triode or Tetrode - trobbins 15:55:08 08/06/20 (6)
  - Uhhhh Really? - Chip647 17:48:13 08/06/20 (5)
    - RE: Uhhhh Really? - Lee of Omaha 02:58:30 08/07/20 (0)
    - RE: Uhhhh Really? - trobbins 19:35:42 08/06/20 (3)
      - What has heater/cathode (voltage) rating got to do with this topic? - Chip647 16:20:49 08/08/20 (2)
        
        RE: What has heater/cathode (voltage) rating got to do with this topic? - trobbins 18:38:04 08/08/20 (1)
        
        RE: What has heater/cathode (voltage) rating got to do with this topic? - Chip647 06:53:32 08/09/20 (0)
- The screen grid has a voltage rating - Chip647 06:41:44 08/06/20 (0)
When strapping an output pentode to triode.... - viridian 19:55:42 08/04/20 (10)
- RE: When strapping an output pentode to triode.... - Tre' 19:45:43 08/06/20 (0)
- Just to be clear... - Lee of Omaha 17:12:29 08/06/20 (0)
- RE: When strapping an output pentode to triode.... - Lee of Omaha 19:37:07 08/05/20 (0)
- Thanks so much gents... - viridian 09:00:18 08/05/20 (3)
  - RE: Thanks so much gents... - kobasa@xs4all.nl 10:32:42 08/05/20 (2)
    - RE: Thanks so much gents... - kobasa@xs4all.nl 10:41:30 08/05/20 (1)
      - Seek and ye shall find.... - viridian 13:40:41 08/05/20 (0)
- RE: When strapping an output pentode to triode.... - trobbins 00:02:34 08/05/20 (1)
  - RE: When strapping an output pentode to triode.... - trobbins 22:16:52 08/05/20 (0)
- RE: When strapping an output pentode to triode.... - Chip647 20:17:59 08/04/20 (0)
Stephie Bench LT spice reactive loadlines. - dave slagle 12:41:34 08/02/20 (5)
- RE: Stephie Bench LT spice reactive loadlines. - 91derlust 22:09:02 08/06/20 (2)
  - RE: Stephie Bench LT spice reactive loadlines. - Stephen R 05:54:00 08/07/20 (1)
    - RE: Stephie Bench LT spice reactive loadlines. - 91derlust 14:43:22 08/07/20 (0)
- Thanks Dave. Great resource nt - Stephen R 08:27:57 08/06/20 (0)
- superb - thanks Dave! (nt) - Jim Dowdy 02:13:42 08/06/20 (0)
Polarity of "mylar" capacitor? - Lew 09:42:55 07/31/20 (8)
- RE: Polarity of "mylar" capacitor? - coffee-phil 09:56:52 07/31/20 (7)
  - I think you're right. - Lew 10:16:06 07/31/20 (6)
    - RE: I think you're right. - coffee-phil 13:20:35 07/31/20 (5)
      - RE: I think you're right. - dave slagle 16:35:25 07/31/20 (4)
        
        Thanks, guys! - Lew 08:24:59 08/06/20 (0)
        
        RE: I think you're right. - Chip647 20:09:45 07/31/20 (2)
        
        RE: I think you're right. - Tre' 23:08:19 07/31/20 (1)
        
        I agree! - Chip647 13:13:04 08/01/20 (0)
Zero bias - vetmedrobert@gmail.com 20:39:57 07/29/20 (32)
- A2 Brute' - elblanco 18:02:59 08/01/20 (0)
- RE: the new breadboard is earning its keep - Jim Doyle 20:52:52 07/29/20 (30)
  - RE: the new breadboard is earning its keep - vetmedrobert@gmail.com 21:09:31 07/29/20 (29)
    - RE: the new breadboard is earning its keep - Jim Doyle 20:59:12 07/30/20 (0)
    - RE: the new breadboard is earning its keep - Tre' 19:33:54 07/30/20 (27)
      - RE: the new breadboard is earning its keep - dave slagle 05:30:17 07/31/20 (2)
        
        RE: the new breadboard is earning its keep - PakProtector 05:20:46 08/12/20 (0)
        
        yes, thank you. nt - Tre' 10:28:05 07/31/20 (0)
      - RE: the new breadboard is earning its keep - vetmedrobert@gmail.com 19:45:13 07/30/20 (23)
        
        RE: the new breadboard is earning its keep - Tre' 19:53:34 07/30/20 (22)
        
        RE: the new breadboard is earning its keep - vetmedrobert@gmail.com 19:56:01 07/30/20 (21)
        
        RE: the new breadboard is earning its keep - Tre' 20:01:37 07/30/20 (20)
        
        RE: the new breadboard is earning its keep - rivervalley817 20:26:12 07/30/20 (2)
        
        RE: the new breadboard is earning its keep - Tre' 20:56:04 07/30/20 (1)
        
        RE: the new breadboard is earning its keep - rivervalley817 22:43:43 07/30/20 (0)
        
        RE: the new breadboard is earning its keep - vetmedrobert@gmail.com 20:09:52 07/30/20 (14)
        
        RE: the new breadboard is earning its keep - Tre' 20:56:36 07/30/20 (13)
        
        RE: the new breadboard is earning its keep - vetmedrobert@gmail.com 10:25:54 07/31/20 (12)
        
        RE: the new breadboard is earning its keep - Tre' 23:16:34 07/31/20 (11)
        
        RE: the new breadboard is earning its keep - vetmedrobert@gmail.com 08:40:52 08/01/20 (1)
        
        RE: the new breadboard is earning its keep - Tre' 20:03:19 08/01/20 (0)
        
        RE: the new breadboard is earning its keep - dave slagle 04:40:11 08/01/20 (8)
        
        RE: the new breadboard is earning its keep - Tre' 07:15:25 08/02/20 (4)
        
        RE: the new breadboard is earning its keep - dave slagle 11:17:04 08/02/20 (3)
        
        you're right. So how is it called a gg? nt - Tre' 11:19:39 08/02/20 (2)
        
        RE: you're right. So how is it called a gg? nt - elblanco 08:18:26 08/03/20 (1)
        
        RE: you're right. So how is it called a gg? nt - Tre' 17:47:32 08/03/20 (0)
        
        RE: the new breadboard is earning its keep - Tre' 20:04:07 08/01/20 (2)
        
        RE: the new breadboard is earning its keep - Stephen R 00:36:09 08/02/20 (1)
        
        found it. nt - Tre' 07:16:06 08/02/20 (0)
        
        Here's an article about grounded grid amplifiers - Tre' 20:08:11 07/30/20 (1)
        
        RE: Here's an article about grounded grid amplifiers - PakProtector 15:02:34 08/01/20 (0)
New Toy - GEO 18:53:02 07/25/20 (9)
- RE: New Toy - Jim D. 10:13:38 07/28/20 (1)
  - RE: New Toy - GEO 10:20:47 07/28/20 (0)
- Best tube ever made - Gordon Rankin 11:11:46 07/27/20 (1)
  - RE: Best tube ever made - GEO 11:22:58 07/27/20 (0)
- RE: New Toy - Tre' 15:16:15 07/26/20 (1)
  - RE: New Toy - GEO 15:37:15 07/26/20 (0)
- RE: New Toy - Stephen R 03:19:54 07/26/20 (2)
  - RE: New Toy - 91derlust 15:09:04 07/27/20 (0)
  - RE: New Toy - GEO 06:41:10 07/26/20 (0)
Quality substitute for Greyhill DPDT toggle switch needed - B. Scarpia 12:52:34 07/21/20 (5)
- RE: What was the question again? OY! - B. Scarpia 14:14:26 07/21/20 (3)
  - RE: What was the question again? OY! - VanArn 14:53:07 07/21/20 (2)
    - RE: Thanks. I took another look around and found this - B. Scarpia 15:18:50 07/21/20 (1)
      - I have one of those still sitting in a pkg! - Jonesy 08:35:45 07/22/20 (0)
- Signal? Power? Rating? - Chip647 13:40:33 07/21/20 (0)
Learning about tube amps - Where to start - Vintage Armadillo 07:24:17 07/21/20 (8)
- RE: Learning about tube amps - Where to start - deathtube 667 08:00:42 07/27/20 (0)
- RE: Learning about tube amps - Where to start - immatthewj 16:35:06 07/24/20 (1)
  - RE: Learning about tube amps - Where to start - immatthewj 14:29:24 07/27/20 (0)
- RE: Learning about tube amps - Where to start - hifipaul 06:45:44 07/23/20 (0)
- RE: Learning about tube amps - Where to start - B. Scarpia 12:58:15 07/21/20 (0)
- RE: Learning about tube amps - Where to start - 6bq5 08:42:37 07/21/20 (0)
- RE: Learning about tube amps - Where to start - Bill Way 07:57:06 07/21/20 (0)
- Maybe create a Systems Requirement list - Charlie8521 07:46:02 07/21/20 (0)
Transistor Behavior Mod? - Lee of Omaha 09:38:37 07/19/20 (6)
- RE: Transistor Behavior Mod? - pictureguy 18:26:37 08/08/20 (0)
- RE: Transistor Behavior Mod? - hahax@verizon.net 20:39:38 07/20/20 (1)
  - RE: Transistor Behavior Mod? - rivervalley817 21:14:22 07/20/20 (0)
- RE: Transistor Behavior Mod? - 6bq5 22:21:20 07/19/20 (0)
- RE: Transistor Behavior Mod? - hahax@verizon.net 20:37:54 07/19/20 (1)
  - RE: Transistor Behavior Mod? - rivervalley817 21:47:43 07/19/20 (0)
Another VR Tube Question - WntrMute2 09:05:37 07/10/20 (9)
- Read an article like this - Chip647 06:20:13 07/11/20 (5)
  - RE: Read an article like this - WntrMute2 06:40:13 07/11/20 (4)
    - RE: Read an article like this - Chip647 07:16:47 07/12/20 (3)
      - RE: Read an article like this - WntrMute2 07:26:55 07/12/20 (2)
        
        RE: Read an article like this - Stephen R 13:39:18 07/12/20 (1)
        
        RE: Read an article like this - WntrMute2 14:53:33 07/12/20 (0)
- RE: Another VR Tube Question - Stephen R 01:09:04 07/11/20 (2)
  - RE: Another VR Tube Question - WntrMute2 07:17:56 07/11/20 (1)
    - RE: Another VR Tube Question - Stephen R 08:36:43 07/11/20 (0)
6CB5 - hifipaul 12:59:30 07/05/20 (6)
- RE: 6CB5 ... yep - deathtube 667 08:07:05 07/06/20 (5)
  - RE: 6CB5 ... yep - PakProtector 17:41:23 07/06/20 (4)
    - RE: 6CB5 ... yep - hifipaul 19:13:34 07/06/20 (3)
      - RE: 6CB5 ... yep - PakProtector 05:22:44 07/08/20 (2)
        
        RE: 6CB5 ... yep - hifipaul 11:36:19 07/08/20 (1)
        
        RE: 6CB5 ... yep - PakProtector 04:08:01 07/10/20 (0)
15E1 tube - thermionic addictions 12:53:27 07/05/20 (5)
- "Intended for use as a shunt control valve in stabilized power packs" - Chip647 18:59:48 07/05/20 (4)
  - Well that was a very silly mistake on my part - thermionic addictions 09:21:30 07/06/20 (3)
    - RE: Well that was a very silly mistake on my part - PakProtector 18:55:56 07/06/20 (2)
      - RE: Well that was a very silly mistake on my part - thermionic addictions 12:07:35 07/08/20 (1)
        
        RE: Well that was a very silly mistake on my part - PakProtector 06:25:19 07/10/20 (0)
Audio Note Potentiometer Review - B. Scarpia 04:41:26 07/05/20 (1)
- RE: Audio Note Potentiometer Review - Jonesy 10:12:05 07/05/20 (0)
Question about OPTs for SET - Mike C 02:31:42 06/29/20 (132)
- RE: Question about OPTs for SET - Conclusion - Mike C 10:52:36 07/09/20 (1)
  - RE: Question about OPTs for SET - Conclusion - 91derlust 21:52:02 07/09/20 (0)
- RE: Question about OPTs for SET - hifipaul 09:04:58 07/03/20 (109)
  - Sorry Folks - Mike C 11:05:15 07/09/20 (17)
    - RE: Sorry Folks - Stuben 11:08:03 07/12/20 (9)
      - RE: Sorry Folks - kobasa@xs4all.nl 11:21:54 07/12/20 (8)
        
        RE: Sorry Folks - RPMac 07:16:18 07/19/20 (4)
        
        RE: Sorry Folks - kobasa@xs4all.nl 06:56:27 07/26/20 (3)
        
        RE: Sorry Folks - RPMac 13:13:12 07/27/20 (2)
        
        RE: Sorry Folks - kobasa@xs4all.nl 13:03:38 07/28/20 (0)
        
        RE: Sorry Folks - kobasa@xs4all.nl 23:16:58 07/27/20 (0)
        
        RE: Sorry Folks - Stuben 12:12:13 07/18/20 (0)
        
        RE: Sorry Folks - Mike C 05:33:23 07/17/20 (0)
        
        RE: Sorry Folks - Mike C 05:45:22 07/15/20 (0)
    - RE: Sorry Folks - 91derlust 12:58:37 07/10/20 (0)
    - RE: Sorry Folks - dave slagle 07:47:01 07/10/20 (5)
      - RE: Sorry Folks - GEO 14:44:39 07/10/20 (4)
        
        RE: Sorry Folks - Lew 09:39:02 07/29/20 (3)
        
        Me either - Dave Pogue 10:20:18 07/29/20 (2)
        
        RE: Me either - jlsemrad 13:47:38 08/01/20 (1)
        
        RE: Me either - kobasa@xs4all.nl 06:35:13 08/05/20 (0)
  - Why nickel? - 91derlust 14:32:17 07/03/20 (88)
    - RE: Why nickel? - Paul Joppa 15:35:50 07/03/20 (87)
      - RE: Why nickel? - 91derlust 01:21:45 07/04/20 (86)
        
        RE: Why nickel? - dave slagle 06:11:14 07/04/20 (77)
        
        RE: Why nickel? - 91derlust 13:48:39 07/04/20 (0)
        
        RE: Why nickel? - kobasa@xs4all.nl 08:29:34 07/04/20 (75)
        
        RE: Why nickel? - dave slagle 09:29:17 07/04/20 (74)
        
        RE: Why nickel? - kobasa@xs4all.nl 10:31:42 07/04/20 (73)
        
        RE: Why nickel? - dave slagle 12:46:42 07/04/20 (70)
        
        RE: Why nickel? - 91derlust 18:33:49 07/05/20 (24)
        
        RE: Why nickel? - rivervalley817 19:56:55 07/05/20 (23)
        
        RE: Why nickel? - kobasa@xs4all.nl 23:07:39 07/05/20 (22)
        
        RE: Why nickel? - dave slagle 07:04:35 07/06/20 (21)
        
        RE: Why nickel? - kobasa@xs4all.nl 09:18:06 07/06/20 (20)
        
        RE: Why nickel? - dave slagle 14:19:40 07/06/20 (19)
        
        RE: Why nickel? - kobasa@xs4all.nl 14:27:41 07/06/20 (18)
        
        RE: Why nickel? - rivervalley817 19:03:57 07/06/20 (17)
        
        RE: Why nickel? - kobasa@xs4all.nl 22:53:43 07/06/20 (16)
        
        RE: Why nickel? - dave slagle 06:46:21 07/07/20 (13)
        
        RE: Why nickel? - kobasa@xs4all.nl 06:27:20 07/10/20 (12)
        
        RE: Why nickel? - kobasa@xs4all.nl 06:29:45 07/10/20 (11)
        
        RE: Why nickel? - dave slagle 08:23:14 07/10/20 (10)
        
        RE: Why nickel? - kobasa@xs4all.nl 09:16:24 07/10/20 (9)
        
        RE: Why nickel? - kobasa@xs4all.nl 10:43:39 07/10/20 (8)
        
        RE: Why nickel? - dave slagle 12:58:32 07/10/20 (7)
        
        RE: Why nickel? - kobasa@xs4all.nl 13:50:04 07/10/20 (6)
        
        RE: Why nickel? - dave slagle 15:36:22 07/10/20 (5)
        
        RE: Why nickel? - kobasa@xs4all.nl 23:00:11 07/10/20 (4)
        
        RE: Why nickel? - dave slagle 05:35:36 07/11/20 (3)
        
        RE: Why nickel? - kobasa@xs4all.nl 06:15:32 07/11/20 (2)
        
        RE: Why nickel? - dave slagle 07:18:09 07/11/20 (1)
        
        RE: Why nickel? - kobasa@xs4all.nl 08:01:42 07/11/20 (0)
        
        RE: Why nickel? - kobasa@xs4all.nl 02:18:32 07/07/20 (1)
        
        RE: Why nickel? - The Bored 04:45:32 07/07/20 (0)
        
        RE: Why nickel? - kobasa@xs4all.nl 02:48:04 07/05/20 (44)
        
        RE: Why nickel? - rivervalley817 13:16:49 07/06/20 (2)
        
        RE: Why nickel? - kobasa@xs4all.nl 13:27:41 07/06/20 (1)
        
        RE: Why nickel? - rivervalley817 13:44:37 07/06/20 (0)
        
        RE: Why nickel? - dave slagle 07:29:56 07/05/20 (36)
        
        RE: Why nickel? - kobasa@xs4all.nl 09:44:16 07/05/20 (35)
        
        RE: Why nickel? - pictureguy 12:36:33 07/05/20 (0)
        
        RE: Why nickel? - dave slagle 10:53:46 07/05/20 (33)
        
        RE: Why nickel? - rivervalley817 11:29:39 07/05/20 (31)
        
        RE: Why nickel? - dave slagle 14:16:40 07/05/20 (9)
        
        RE: Why nickel? - 91derlust 22:41:44 07/06/20 (0)
        
        RE: Why nickel? - rivervalley817 14:50:18 07/05/20 (0)
        
        RE: Why nickel? - kobasa@xs4all.nl 14:47:46 07/05/20 (6)
        
        RE: Why nickel? - dave slagle 17:56:39 07/05/20 (5)
        
        RE: Why nickel? - jlsemrad 19:16:09 07/14/20 (4)
        
        RE: Why nickel? - jlsemrad 19:17:37 07/14/20 (3)
        
        RE: Why nickel? - jlsemrad 19:35:08 07/14/20 (2)
        
        RE: Why nickel? - jlsemrad 19:47:02 07/14/20 (1)
        
        RE: Why nickel? - kobasa@xs4all.nl 23:58:37 07/14/20 (0)
        
        RE: Why nickel? - kobasa@xs4all.nl 12:09:27 07/05/20 (20)
        
        RE: Why nickel? - rivervalley817 12:24:10 07/05/20 (19)
        
        RE: Why nickel? - kobasa@xs4all.nl 12:37:49 07/05/20 (18)
        
        RE: Why nickel? - sideliner 13:15:07 07/05/20 (14)
        
        RE: Why nickel? - kobasa@xs4all.nl 13:27:05 07/05/20 (13)
        
        RE: Why nickel? - sideliner 14:09:50 07/05/20 (12)
        
        RE: Why nickel? - LinuxGuru 02:49:35 07/08/20 (11)
        
        RE: Why nickel? - sideliner 11:08:28 07/08/20 (10)
        
        RE: Why nickel? - LinuxGuru 04:40:37 07/12/20 (8)
        
        RE: Why nickel? - LinuxGuru 04:59:43 07/12/20 (7)
        
        RE: Why nickel? - sideliner 17:22:00 07/12/20 (5)
        
        RE: Why nickel? - kobasa@xs4all.nl 02:29:17 07/13/20 (4)
        
        RE: Why nickel? - sideliner 10:37:34 07/13/20 (3)
        
        RE: Why nickel? - The Bored 16:36:01 07/13/20 (0)
        
        RE: Why nickel? - kobasa@xs4all.nl 15:16:31 07/13/20 (1)
        
        RE: Why nickel? - sideliner 14:45:36 07/14/20 (0)
        
        RE: Why nickel? - kobasa@xs4all.nl 11:08:14 07/12/20 (0)
        
        RE: Why nickel? - dave slagle 12:11:09 07/10/20 (0)
        
        RE: Why nickel? - rivervalley817 12:52:15 07/05/20 (2)
        
        RE: Why nickel? - kobasa@xs4all.nl 13:10:42 07/05/20 (1)
        
        RE: Why nickel? - rivervalley817 13:21:16 07/05/20 (0)
        
        RE: Why nickel? - kobasa@xs4all.nl 11:20:59 07/05/20 (0)
        
        RE: Well, I happen to have Teilhard de Chardin right here and he says... - B. Scarpia 05:21:36 07/05/20 (3)
        
        RE: Well, I happen to have Teilhard de Chardin right here and he says... - kyle 12:29:30 07/06/20 (2)
        
        RE: Well, I happen to have Teilhard de Chardin right here and he says... - kobasa@xs4all.nl 12:52:08 07/06/20 (1)
        
        RE: Well, I happen to have Teilhard de Chardin right here and he says... - kyle 11:10:16 07/14/20 (0)
        
        This, I have to AGREE! - amandarae 11:43:11 07/04/20 (1)
        
        RE: This, I have to AGREE! - kobasa@xs4all.nl 12:14:43 07/04/20 (0)
        
        RE: Why nickel? - Eli Duttman 03:36:07 07/04/20 (7)
        
        RE: Why nickel? - vinnie2 03:28:13 07/05/20 (4)
        
        RE: Why nickel? - Paul Joppa 08:46:52 07/05/20 (2)
        
        RE: Why nickel? - dave slagle 10:25:52 07/05/20 (1)
        
        RE: Why nickel? - 91derlust 13:37:47 07/06/20 (0)
        
        RE: Why nickel? - kobasa@xs4all.nl 03:59:07 07/05/20 (0)
        
        RE: Why nickel? - dave slagle 06:13:18 07/04/20 (0)
        
        RE: Why nickel? - kobasa@xs4all.nl 04:30:48 07/04/20 (0)
  - RE: Question about OPTs for SET - GEO 14:02:04 07/03/20 (0)
  - Thanks, I'll follow up later, will try nickel (NT) - Mike C 11:23:47 07/03/20 (0)
- RE: Question about OPTs for SET - Conclusion - Mike C 01:45:42 07/02/20 (8)
  - RE: Question about OPTs for SET - Conclusion - 91derlust 04:18:58 07/03/20 (5)
    - Lundahl - andy evans 01:32:35 07/04/20 (4)
      - RE: Lundahl - Mike C 11:12:40 07/09/20 (0)
      - RE: Lundahl - 91derlust 01:39:37 07/04/20 (2)
        
        RE: Lundahl - vinnie2 02:29:58 07/04/20 (1)
        
        RE: Lundahl - 91derlust 23:38:53 07/04/20 (0)
  - RE: Question about OPTs for SET - Conclusion - bouncy ball 07:43:02 07/02/20 (0)
  - RE: Pretty entertaining to highlight and Google 'Raphaelite 5W 5.5k:32 OPTs" nt - B. Scarpia 04:26:20 07/02/20 (0)
- RE: Question about OPTs for SET - Paul Joppa 08:24:50 06/29/20 (10)
  - RE: Question about OPTs for SET - dave slagle 08:37:18 07/01/20 (8)
    - RE: Question about OPTs for SET - kobasa@xs4all.nl 02:48:28 07/04/20 (3)
      - RE: Question about OPTs for SET - dave slagle 12:50:21 07/04/20 (2)
        
        RE: Question about OPTs for SET - kobasa@xs4all.nl 03:21:19 07/05/20 (1)
        
        RE: Question about OPTs for SET - dave slagle 07:12:42 07/05/20 (0)
    - RE: Question about OPTs for SET - Paul Joppa 15:42:45 07/01/20 (3)
      - RE: Question about OPTs for SET - Mike C 01:13:13 07/02/20 (0)
      - RE: Question about OPTs for SET - 91derlust 18:55:48 07/01/20 (0)
      - RE: Question about OPTs for SET - dave slagle 17:05:42 07/01/20 (0)
  - RE: Question about OPTs for SET - Mike C 01:00:35 07/01/20 (0)
Headphone Valve (20mA, gain about 20) - Mike C 02:02:19 06/29/20 (3)
- Great outcome. I'm enjoying your adventures. Nt - 91derlust 02:19:54 07/01/20 (0)
- Have you tried substituting a 6V6? - andy evans 06:01:15 06/30/20 (1)
  - RE: Have you tried substituting a 6V6? - Mike C 15:03:45 06/30/20 (0)
cnc chassis ? - Iain42 17:51:34 06/27/20 (25)
- share cad files? - Iain42 09:36:48 06/29/20 (6)
  - RE: share cad files? - dave slagle 09:28:55 07/01/20 (1)
    - RE: share cad files? - Iain42 09:31:02 07/01/20 (0)
  - RE: share cad files? - Iain42 09:27:01 07/01/20 (0)
  - RE: share cad files? - deafbykhorns 06:28:17 07/01/20 (0)
  - RE: share cad files? - 91derlust 13:01:24 06/30/20 (1)
    - RE: share cad files? - Iain42 10:57:08 07/01/20 (0)
- RE: cnc chassis ? - GEO 12:40:54 06/28/20 (0)
- RE: cnc chassis ? - Story 09:56:36 06/28/20 (0)
- Prototype shops - Charlie8521 09:15:04 06/28/20 (0)
- RE: cnc chassis ? - 91derlust 04:19:58 06/28/20 (1)
  - RE: cnc chassis ? - Iain42 07:36:29 06/28/20 (0)
- RE: cnc chassis ? - LinuxGuru 00:59:26 06/28/20 (5)
  - RE: cnc chassis ? - Iain42 07:48:11 06/28/20 (4)
    - RE: cnc chassis ? - LinuxGuru 08:02:54 06/28/20 (3)
      - RE: cnc chassis ? - Paul Joppa 08:21:11 06/28/20 (2)
        
        RE: cnc chassis ? - 91derlust 15:36:56 06/28/20 (0)
        
        RE: cnc chassis ? - LinuxGuru 08:52:28 06/28/20 (0)
- Use a modular system? - andy evans 00:33:26 06/28/20 (1)
  - RE: Use a modular system? - Iain42 07:39:51 06/28/20 (0)
- RE: cnc chassis ? - Paul Joppa 21:30:14 06/27/20 (4)
  - RE: cnc chassis ? - Iain42 07:43:11 06/28/20 (3)
    - RE: cnc chassis ? - xaudiomanx 16:22:43 06/30/20 (2)
      - RE: cnc chassis ? - Iain42 09:27:46 07/01/20 (1)
        
        RE: cnc chassis ? - BillWojo 08:01:51 07/11/20 (0)
Loud siren sound in one speaker, tube preamp - jeanft 17:10:52 06/24/20 (8)
- RE: Loud siren sound in one speaker, tube preamp - Jonesy 11:18:57 06/25/20 (2)
  - RE: Loud siren sound in one speaker, tube preamp - jeanft 14:45:39 06/25/20 (1)
    - RE: Loud siren sound in one speaker, tube preamp - Jonesy 14:57:32 06/25/20 (0)
- That is called an oscillation - Chip647 17:51:13 06/24/20 (4)
  - RE: That is called an oscillation - jeanft 18:22:50 06/24/20 (3)
    - Bad socket then? - Lew 08:12:35 06/26/20 (2)
      - RE: Bad socket then? - jeanft 13:46:58 06/26/20 (1)
        
        RE: Bad socket then? - Stuben 11:59:45 07/18/20 (0)
Question about 6922 design - jedrider 11:36:49 06/13/20 (11)
- RE: Question about 6922 design - Steve O 16:54:52 06/13/20 (1)
  - RE: Question about 6922 design - Paul Joppa 21:34:21 06/13/20 (0)
- RE: Question about 6922 design - Blackdog 13:28:55 06/13/20 (6)
  - RE: Question about 6922 design - jedrider 07:27:59 06/14/20 (5)
    - RE: Question about 6922 design - Blackdog 04:12:03 06/15/20 (0)
    - One of the main ways to junk an input tube is to violate the Heater to Cathode voltage ratings - Chip647 19:27:16 06/14/20 (3)
      - RE: One of the main ways to junk an input tube is to violate the Heater to Cathode voltage ratings - Blackdog 04:20:39 06/15/20 (2)
        
        there are 2 ratings: heater positive and heater negative - Chip647 19:47:29 06/16/20 (1)
        
        RE: there are 2 ratings: heater positive and heater negative - Blackdog 12:57:31 06/17/20 (0)
- RE: Question about 6922 design - Story 12:43:44 06/13/20 (0)
- It is possible - richardl 12:39:18 06/13/20 (0)
capacitor value decode, help please - bouncy ball 08:25:52 06/12/20 (2)
- RE: capacitor value decode, help please - Blackdog 16:31:27 06/12/20 (0)
- RE: capacitor value decode, help please - Story 09:33:58 06/12/20 (0)
Schiit Saga Plus upgrade - Cougar 20:29:15 06/10/20 (4)
- RE: Schiit Saga Plus upgrade - xaudiomanx 16:27:57 06/12/20 (0)
- Is there a market for someone to... - Charlie8521 13:21:05 06/11/20 (1)
  - I don't think you can better the..... - Cougar 16:23:06 06/11/20 (0)
- To further benefit others... - Charlie8521 04:49:27 06/11/20 (0)
SET w/ Feedback Circuit Question??? - roger.brubaker@outlook.com 10:02:25 06/10/20 (7)
- RE: SET w/ Feedback Circuit Question??? - roger.brubaker@outlook.com 08:45:05 06/21/20 (4)
  - Are you listening to the Christian McBride show? - Lew 09:57:24 06/21/20 (3)
    - RE: Are you listening to the Christian McBride show? - roger.brubaker@outlook.com 12:17:14 06/21/20 (2)
      - G-strings... - Lew 11:43:00 07/17/20 (1)
        
        RE: G-strings... - roger.brubaker@outlook.com 02:50:52 07/21/20 (0)
- RE: SET w/ Feedback Circuit Question??? - Ralph 13:33:45 06/10/20 (1)
  - RE: SET w/ Feedback Circuit Question??? - 6bq5 16:17:58 06/11/20 (0)
Looking for info on Russian resistors... - Solidcore 04:12:59 06/08/20 (5)
- RE: Looking for info on Russian resistors... - LinuxGuru 09:20:01 07/10/20 (2)
  - RE: Looking for info on Russian resistors... - Solidcore 07:01:04 07/12/20 (1)
    - RE: Looking for info on Russian resistors... - LinuxGuru 10:47:31 07/12/20 (0)
- RE: Looking for info on Russian resistors... - GeorgePope 14:28:49 06/08/20 (1)
  - RE: Looking for info on Russian resistors... - Solidcore 12:53:52 06/10/20 (0)
Dark Blue Tube Sockets? - JimBop 13:27:37 06/07/20 (13)
- Why not just replace the pin contact? - Chip647 18:39:27 06/07/20 (6)
  - Where di mmm - JimBop 10:56:39 06/11/20 (0)
  - Where di mmm - JimBop 22:05:30 06/10/20 (4)
    - RE: Where di mmm - Jonesy 17:14:16 06/11/20 (3)
      - RE: Where di mmm - JimBop 18:11:50 06/14/20 (1)
        
        RE: Where di mmm - Jonesy 21:07:21 06/14/20 (0)
      - RE: Where di mmm - JimBop 17:29:49 06/11/20 (0)
- RE: Dark Blue Tube Sockets? - tubejack 14:31:02 06/07/20 (5)
  - RE: Dark Blue Tube Sockets? - JimBop 15:11:57 06/07/20 (4)
    - They're on the same DIY site. You just need to reuse you're chassis mount bracket. - Jonesy 22:11:39 06/07/20 (3)
      - RE: They're on the same DIY site. You just need to reuse you're chassis mount bracket. - JimBop 20:25:28 06/09/20 (2)
        
        However ... - JimBop 20:29:26 06/09/20 (1)
        
        I hate when that happens! - Jonesy 13:33:27 06/10/20 (0)
Williamson revisited - hifipaul 07:42:03 06/05/20 (17)
- RE: Williamson revisited - hifipaul 18:20:22 06/23/20 (0)
- RE: Williamson revisited - fredtr 11:22:22 06/11/20 (2)
  - RE: Williamson revisited - hifipaul 17:42:49 06/13/20 (1)
    - RE: Williamson revisited - fredtr 09:45:44 06/14/20 (0)
- Isn't the 807 a 6L6 variant, the variant being the plate cap? - Ralph 12:40:46 06/08/20 (0)
- RE: Williamson revisited - Lew 18:06:54 06/06/20 (0)
- RE: Williamson revisited - fredtr 06:45:31 06/06/20 (6)
  - RE: Williamson revisited - hifipaul 08:25:56 06/06/20 (5)
    - RE: Williamson revisited - fredtr 13:10:44 06/07/20 (4)
      - RE: Williamson revisited - trobbins 18:57:08 06/07/20 (1)
        
        RE: Williamson revisited - hifipaul 05:04:40 06/08/20 (0)
      - RE: Williamson revisited - hifipaul 18:31:56 06/07/20 (1)
        
        RE: Williamson revisited - fredtr 15:23:23 06/08/20 (0)
- RE: Williamson revisited - Chip647 18:27:09 06/05/20 (1)
  - RE: Williamson revisited - hifipaul 18:57:44 06/05/20 (0)
- RE: Williamson revisited - fredtr 17:29:24 06/05/20 (0)
- RE: Williamson revisited - 6bq5 12:12:57 06/05/20 (0)
Solder Recommendation - fredtr 10:25:22 06/03/20 (8)
- RE: SN63 - Ralph 12:04:00 06/03/20 (5)
  - RE: SN63 - Eli Duttman 12:49:55 06/03/20 (4)
    - RE: SN63 - Story 05:29:25 06/05/20 (1)
      - RE: SN63 - Eli Duttman 12:07:25 06/05/20 (0)
    - RE: SN63 - Jim McShane 17:44:55 06/04/20 (0)
    - +1 for the Cardas - JKT 17:09:54 06/03/20 (0)
- RE: Solder Recommendation - Story 11:12:31 06/03/20 (1)
  - RE: Solder Recommendation - fredtr 17:44:20 06/03/20 (0)
Finally Complete - 304tl - Chip647 16:27:40 05/31/20 (15)
- RE: Finally Complete - 304tl - Sherwood Forest 20:37:30 06/22/20 (0)
- RE: Finally Complete - 304tl - Maxamillion 13:46:51 06/02/20 (0)
- RE: Finally Complete - 304tl - dadbar 07:39:54 06/02/20 (2)
  - RE: Finally Complete - 304tl - kobasa@xs4all.nl 12:31:06 06/02/20 (1)
    - Naaa 1,100 volts - Chip647 20:24:26 06/03/20 (0)
- That is really, really impressive. nt. - 91derlust 01:54:36 06/02/20 (0)
- RE: Finally Complete - 304tl - xaudiomanx 17:28:26 06/01/20 (0)
- RE: Finally Complete - 304tl - rivervalley817 13:27:08 06/01/20 (0)
- Awesome Looking ! .................. - Cut-Throat 13:16:14 06/01/20 (0)
- Yikes! - zacster 11:40:29 06/01/20 (0)
- RE: Yikes! Makes my stuff look like this: - B. Scarpia 03:59:11 06/01/20 (0)
- Wowsers! - vinnie2 18:50:25 05/31/20 (0)
- RE: Finally Complete - 304tl - deafbykhorns 17:50:44 05/31/20 (0)
- Amazing nt - Tre' 17:28:01 05/31/20 (0)
- Wow!! Beautiful!!! - amandarae 16:36:33 05/31/20 (0)

Threads started on or before 4/30/07 are archived Here.
Threads started on or before 4/15/07 are archived Here.
Threads started on or before 3/31/07 are archived Here.
Threads started on or before 3/15/07 are archived Here.
Threads started on or before 2/28/07 are archived Here.