Tube DIY Asylum

Do It Yourself (DIY) paradise for tube and SET project builders.

For Sale Ads

FAQ / News / Events

Caution! Before attempting modifications yourself, please review our Tube/DIY Safety and Disclaimer.

Sponsored Links

VH Audio - Cables, Tweaks, Accessories and DIY Parts

AudioAsylum Trader

USA made vintage chokes HI INDUCTANCE, HI VOLTAGE, LOW DCR - Make me an offer on any of the 3 pairs of these i...

hum issue - xaudiomanx 20:02:15 03/27/18 (8)
- what happens if you connect a wire from the RCAs to chassis? nt - Ralph 13:10:15 03/28/18 (2)
  - RE: what happens if you connect a wire from the RCAs to chassis? nt - xaudiomanx 15:07:10 03/28/18 (1)
    - So is the tone arm properly grounded? - Ralph 09:20:26 03/29/18 (0)
- RE: hum issue - Caucasian Blackplate 09:18:06 03/28/18 (1)
  - RE: hum issue - xaudiomanx 10:58:20 03/28/18 (0)
- RCA shorting plugs - AbeCollins 08:25:03 03/28/18 (1)
  - RE: RCA shorting plugs - xaudiomanx 11:01:12 03/28/18 (0)
- Mains hum pickup - FenderLover 23:28:18 03/27/18 (0)
schematic modification - xaudiomanx 13:14:17 03/27/18 (9)
- RE: schematic modification - Triode_Kingdom 19:40:20 03/27/18 (4)
  - RE: schematic modification - dave slagle 05:18:56 03/28/18 (3)
    - RE: schematic modification - Triode_Kingdom 07:57:13 03/28/18 (0)
    - "those resistors really do bother me." Me too. - Tre' 06:57:47 03/28/18 (1)
      - The Miller capacitance of a ... - Tre' 07:18:14 03/28/18 (0)
- RE: schematic modification - Tre' 13:23:00 03/27/18 (3)
  - RE: schematic modification - xaudiomanx 14:38:23 03/27/18 (2)
    - RE: schematic modification - Tre' 17:36:30 03/27/18 (0)
    - RE: schematic modification - McKinneyMike 16:28:24 03/27/18 (0)
max plate dissipation 46 tube - used-hifi 09:55:39 03/27/18 (10)
- RE: max plate dissipation 46 tube - Caucasian Blackplate 07:28:42 03/29/18 (1)
  - RE: max plate dissipation 46 tube - used-hifi 13:56:02 03/29/18 (0)
- RE: max plate dissipation 46 tube - Eli Duttman 11:06:24 03/27/18 (6)
  - RE: max plate dissipation 46 tube - used-hifi 12:37:38 03/27/18 (5)
    - Unless you are going to use it in Class B mode... - FenderLover 12:53:21 03/27/18 (4)
      - RE: Unless you are going to use it in Class B mode... - used-hifi 13:01:47 03/27/18 (3)
        
        If it's Class A, strapped G2... triode mode - FenderLover 13:36:09 03/27/18 (2)
        
        RE: If it's Class A, strapped G2... triode mode - used-hifi 14:06:25 03/27/18 (1)
        
        RE: If it's Class A, strapped G2... triode mode - FenderLover 21:48:00 03/27/18 (0)
- RE: max plate dissipation 46 tube - FenderLover 11:05:41 03/27/18 (0)
4p1l - rage 12:45:13 03/26/18 (98)
- RE: 4p1l - rage 11:38:33 03/31/18 (0)
- RE: 4p1l - GeorgePope 16:24:43 03/28/18 (0)
- RE: 4p1l - Caucasian Blackplate 07:03:45 03/27/18 (2)
  - RE: 4p1l - rage 07:09:55 03/27/18 (1)
    - RE: 4p1l - Caucasian Blackplate 07:54:37 03/27/18 (0)
- RE: why? - deathtube 667 17:48:46 03/26/18 (88)
  - RE: why? - rage 17:59:13 03/26/18 (87)
    - RE: high mu low Rp driver ... - deathtube 667 08:10:34 03/27/18 (86)
      - RE: high mu low Rp driver ... - tube wrangler 09:02:12 03/27/18 (85)
        
        RE: high mu low Rp driver ... - deathtube 667 10:45:05 03/27/18 (84)
        
        RE: high mu low Rp driver ... - Tre' 11:02:28 03/27/18 (48)
        
        RE: high mu low Rp driver ... - tube wrangler 13:56:27 03/27/18 (47)
        
        RE: high mu low Rp driver ... - used-hifi 12:40:56 03/29/18 (0)
        
        RE: high mu low Rp driver ... - Tre' 15:44:16 03/27/18 (45)
        
        RE: high mu low Rp driver ... - tube wrangler 17:23:00 03/27/18 (44)
        
        RE: high mu low Rp driver ... - Tre' 08:56:19 03/28/18 (43)
        
        RE: high mu low Rp driver ... - tube wrangler 23:18:41 03/28/18 (42)
        
        RE: high mu low Rp driver ... - Tre' 07:47:26 03/29/18 (41)
        
        RE: high mu low Rp driver ... - used-hifi 11:48:33 03/29/18 (1)
        
        I won't argue. (nt) - Tre' 12:20:45 03/29/18 (0)
        
        RE: 12AX7 with CCS - deathtube 667 11:36:51 03/29/18 (38)
        
        RE: 12AX7 with CCS - tube wrangler 21:29:41 03/29/18 (37)
        
        really? - Tre' 14:03:52 03/30/18 (36)
        
        RE: really? - tube wrangler 21:08:29 03/30/18 (23)
        
        RE: really? - Tre' 21:36:49 03/30/18 (22)
        
        RE: really? - tube wrangler 18:05:40 03/31/18 (21)
        
        RE: really? - Tre' 15:10:23 04/03/18 (0)
        
        errr...NO - PakProtector 14:50:03 04/02/18 (19)
        
        "TUNERS"!--- RE: errr...NO - tube wrangler 09:52:00 04/04/18 (18)
        
        RE: "TUNERS"!--- RE: errr...NO - cpotl 05:23:52 04/05/18 (3)
        
        RE: "TUNERS"!--- RE: errr...NO - tube wrangler 11:26:17 04/05/18 (2)
        
        RE: "TUNERS"!--- RE: errr...NO - cpotl 12:05:05 04/05/18 (1)
        
        RE: "TUNERS"!--- RE: errr...NO - tube wrangler 23:25:36 04/05/18 (0)
        
        RE: "TUNERS"!--- RE: errr...NO - Tre' 20:33:56 04/04/18 (10)
        
        RE: "TUNERS"!--- RE: errr...NO - tube wrangler 11:43:22 04/05/18 (9)
        
        RE: "TUNERS"!--- RE: errr...NO - Tre' 19:32:22 04/05/18 (8)
        
        RE: "TUNERS"!--- RE: errr...NO - tube wrangler 23:42:55 04/05/18 (7)
        
        RE: "TUNERS"!--- RE: errr...NO - Tre' 07:17:45 04/06/18 (6)
        
        RE: "TUNERS"!--- RE: errr...NO - tube wrangler 09:22:09 04/06/18 (5)
        
        RE: "TUNERS"!--- RE: errr...NO - cpotl 19:55:39 04/06/18 (3)
        
        RE: "TUNERS"!--- RE: errr...NO - JRMA 23:35:09 04/06/18 (2)
        
        RE: "TUNERS"!--- RE: errr...NO - tube wrangler 18:42:25 04/07/18 (1)
        
        RE: "TUNERS"!--- RE: errr...NO - Tre' 21:05:01 04/07/18 (0)
        
        RE: "TUNERS"!--- RE: errr...NO - Tre' 14:55:01 04/06/18 (0)
        
        LMAO... - PakProtector 14:33:46 04/04/18 (2)
        
        RE: LMAO... - tube wrangler 19:34:46 04/04/18 (1)
        
        Still LMAO... - PakProtector 04:30:33 04/07/18 (0)
        
        RE: really? - elblanco 17:06:21 03/30/18 (11)
        
        The value of the plate resistor except... - Tre' 18:46:43 03/30/18 (10)
        
        RE: The value of the plate resistor except... - dave slagle 06:05:45 03/31/18 (9)
        
        RE: The value of the plate resistor except... - PakProtector 09:49:06 03/31/18 (0)
        
        RE: The value of the plate resistor except... - Tre' 06:48:55 03/31/18 (7)
        
        RE: The value of the plate resistor except... - dave slagle 15:49:03 03/31/18 (6)
        
        RE: The value of the plate resistor except... - Tre' 17:29:32 03/31/18 (5)
        
        RE: The value of the plate resistor except... - dave slagle 19:13:36 03/31/18 (4)
        
        RE: The value of the plate resistor except... - Tre' 07:46:52 04/01/18 (2)
        
        RE: The value of the plate resistor except... - dave slagle 08:56:39 04/01/18 (1)
        
        RE: The value of the plate resistor except... - Tre' 10:08:13 04/01/18 (0)
        
        RE: The value of the plate resistor except... - tube wrangler 23:53:24 03/31/18 (0)
        
        RE: high mu low Rp driver ... - rage 10:59:28 03/27/18 (34)
        
        RE: +/- 1/2dB @ 20kHz ... - deathtube 667 15:13:56 03/27/18 (33)
        
        and you believe him? - PakProtector 13:43:52 04/11/18 (2)
        
        RE: and you believe him? - deathtube 667 03:14:07 04/12/18 (0)
        
        RE: and you believe him? - FlaCharlie 15:49:17 04/11/18 (0)
        
        RE: +/- 1/2dB @ 20kHz ... - GeorgePope 05:24:44 03/31/18 (29)
        
        RE: that would be too easy ... - deathtube 667 06:23:38 04/02/18 (28)
        
        RE: that would be too easy ... - tube wrangler 08:59:47 04/04/18 (27)
        
        No Veils and No Secrets?? - FlaCharlie 08:12:36 04/05/18 (26)
        
        RE: where's Waldo (drlowmu) ? - deathtube 667 10:10:35 04/05/18 (25)
        
        RE: where's Waldo (drlowmu) ? - FlaCharlie 12:17:34 04/14/18 (1)
        
        RE: where's Waldo (drlowmu) ? - used-hifi 12:50:34 04/14/18 (0)
        
        RE: where's Waldo (drlowmu) ? - tube wrangler 21:15:32 04/10/18 (22)
        
        RE: where's Waldo (drlowmu) ? - FlaCharlie 06:57:27 04/11/18 (4)
        
        RE: where's Waldo (drlowmu) ? - tube wrangler 08:29:44 04/11/18 (3)
        
        RE: where's Waldo (drlowmu) ? - Tre' 13:19:39 04/14/18 (0)
        
        RE: where's Waldo (drlowmu) ? - FlaCharlie 08:51:25 04/11/18 (0)
        
        RE: where's Waldo (drlowmu) ? - used-hifi 08:49:36 04/11/18 (0)
        
        RE: roadmaps ... schematics - deathtube 667 06:49:21 04/11/18 (16)
        
        RE: roadmaps ... schematics - tube wrangler 09:10:55 04/11/18 (15)
        
        RE: roadmaps ... schematics - FlaCharlie 10:59:56 04/11/18 (14)
        
        RE: roadmaps ... schematics - tube wrangler 20:30:19 04/11/18 (13)
        
        RE: roadmaps ... schematics - FlaCharlie 07:58:35 04/12/18 (12)
        
        RE: all we will have is a rough template ... - deathtube 667 08:49:50 04/12/18 (11)
        
        RE: all we will have is a rough template ... - Tre' 14:48:12 04/14/18 (1)
        
        RE: all we will have is a rough template ... - cpotl 16:43:52 04/14/18 (0)
        
        RE: all we will have is a rough template ... - tube wrangler 11:29:01 04/12/18 (8)
        
        RE: all we will have is a rough template ... - Tre' 14:51:38 04/14/18 (7)
        
        RE: all we will have is a rough template ... - tube wrangler 21:05:24 04/14/18 (6)
        
        RE: all we will have is a rough template ... - FlaCharlie 08:23:46 04/16/18 (3)
        
        RE: all we will have is a rough template ... - tube wrangler 20:58:57 04/16/18 (0)
        
        RE: all we will have is a rough template ... - Tre' 11:44:15 04/16/18 (1)
        
        RE: all we will have is a rough template ... - tube wrangler 15:09:15 04/16/18 (0)
        
        RE: all we will have is a rough template ... - Tre' 06:19:02 04/15/18 (0)
        
        RE: policing activities ... - deathtube 667 02:56:42 04/15/18 (0)
- 4P1L is a good output tube too. - andy evans 16:22:06 03/26/18 (3)
  - RE: 4P1L is a good output tube too. - rage 17:52:29 03/26/18 (2)
    - RE: 4P1L is a good output tube too. - andy evans 09:07:18 03/27/18 (1)
      - RE: 4P1L is a good output tube too. - rage 12:31:38 03/27/18 (0)
I'm so envious of all of you with technical knowledge... - Jonesy 12:27:52 03/26/18 (11)
- RE: I'm so envious of all of you with technical knowledge... - JURB 17:16:18 03/28/18 (5)
  - RE: I'm so envious of all of you with technical knowledge... - Jonesy 12:05:17 03/29/18 (4)
    - RE: I'm so envious of all of you with technical knowledge... - Tweaker456 11:19:17 03/31/18 (0)
    - RE: I'm so envious of all of you with technical knowledge... - JURB 00:54:58 03/31/18 (2)
      - I found these two books that I bought back in the 90's... - Jonesy 08:20:18 03/31/18 (0)
      - Thank you. ..... - Jonesy 03:19:57 03/31/18 (0)
- RE: I'm so envious of all of you with technical knowledge... - Triode_Kingdom 15:41:14 03/26/18 (1)
  - RE: I'm so envious of all of you with technical knowledge... - Ignaz6 11:19:14 04/01/18 (0)
- RE: I'm so envious of all of you with technical knowledge... - FenderLover 15:32:37 03/26/18 (2)
  - +1 for Valve Wizard! (nt) - Jim Dowdy 19:34:59 03/27/18 (1)
    - +2 ... Valve wizard... The man KNOWS how to drive pentodes.-nT - Cleantimestream 06:08:14 03/28/18 (0)
SS vs. tube rectification - xaudiomanx 11:23:04 03/25/18 (32)
- I like the sound of tubes. - DAK 11:19:22 03/27/18 (1)
  - RE: I like the sound of tubes. - Eli Duttman 00:06:24 03/28/18 (0)
- RE: SS vs. tube rectification - twystd 14:48:39 03/26/18 (1)
  - RE: SS vs. tube rectification - Eli Duttman 00:13:22 03/27/18 (0)
- RE: SS vs. tube rectification - deathtube 667 12:52:40 03/26/18 (0)
- RE: SS vs. tube rectification - Stephen R 09:46:18 03/26/18 (16)
  - RE: SS vs. tube rectification - xaudiomanx 09:56:54 03/26/18 (15)
    - RE: SS vs. tube rectification - Stephen R 09:59:07 03/26/18 (14)
      - RE: SS vs. tube rectification - xaudiomanx 11:59:02 03/26/18 (13)
        
        Beveridge amplifier did not use a tube rectifier, .. - Lew 19:32:49 03/26/18 (12)
        
        Isn't that actually +/- 3,200V? (nt) - Steve O 22:22:20 03/26/18 (11)
        
        RE: Isn't that actually +/- 3,200V? (nt) - Lew 07:51:23 03/27/18 (0)
        
        RE: Isn't that actually +/- 3,200V? (nt) - dave slagle 06:18:46 03/27/18 (9)
        
        100% distortion... - PakProtector 10:02:51 03/31/18 (2)
        
        RE: 100% distortion... - dave slagle 19:28:52 03/31/18 (1)
        
        RE: 100% distortion... - PakProtector 15:59:36 04/08/18 (0)
        
        Hazy terminology... - Steve O 11:15:38 03/27/18 (5)
        
        RE: Hazy terminology... - Lew 20:26:11 03/27/18 (1)
        
        Good to hear they're operating so well... - Steve O 21:30:47 03/27/18 (0)
        
        RE: Hazy terminology... - dave slagle 18:34:19 03/27/18 (2)
        
        RE: Hazy terminology... - Steve O 21:24:01 03/27/18 (1)
        
        RE: Hazy terminology... - dave slagle 05:23:13 03/28/18 (0)
- RE: SS vs. tube rectification - Eli Duttman 15:57:16 03/25/18 (9)
  - RE: SS vs. tube rectification - Triode_Kingdom 16:15:52 03/25/18 (8)
    - Even in guitar amps... - FenderLover 18:59:28 03/25/18 (7)
      - RE: Even in guitar amps... - Triode_Kingdom 21:49:50 03/25/18 (6)
        
        RE: Even in guitar amps... - Alpha Al 05:45:15 03/26/18 (4)
        
        Copper caps - FenderLover 06:38:38 03/26/18 (3)
        
        RE: Copper caps - zarniwoop 17:22:03 04/04/18 (0)
        
        RE: Copper caps - Alpha Al 09:53:30 03/26/18 (1)
        
        Matchless Hotbox - FenderLover 10:44:25 03/26/18 (0)
        
        Pedals are nice - FenderLover 22:13:26 03/25/18 (0)
Old 6L6 hi fi amp do I have enough filament current? - bdgregory 12:12:01 03/23/18 (11)
- Mount an extra filament tranny - DAK 10:40:48 03/24/18 (0)
- Guess you could measure the voltage drop... - FenderLover 20:11:58 03/23/18 (0)
- RE: Old 6L6 hi fi amp do I have enough filament current? - Tre' 16:29:42 03/23/18 (3)
  - RE: Old 6L6 hi fi amp do I have enough filament current? - bdgregory 05:45:27 03/24/18 (2)
    - RE: Old 6L6 hi fi amp do I have enough filament current? - Tre' 06:48:05 03/24/18 (1)
      - RE: Old 6L6 hi fi amp do I have enough filament current? - bdgregory 09:09:49 03/24/18 (0)
- RE: Old 6L6 hi fi amp do I have enough filament current? - Caucasian Blackplate 13:29:19 03/23/18 (1)
  - RE: Old 6L6 hi fi amp do I have enough filament current? - bdgregory 14:02:56 03/23/18 (0)
- RE: Old 6L6 hi fi amp do I have enough filament current? - Triode_Kingdom 12:28:07 03/23/18 (2)
  - RE: Old 6L6 hi fi amp do I have enough filament current? - bdgregory 14:04:29 03/23/18 (1)
    - RE: Old 6L6 hi fi amp do I have enough filament current? - Triode_Kingdom 15:12:26 03/23/18 (0)
PSE 6SN7 DC 6SN7 : small format breadboard - deathtube 667 17:49:32 03/22/18 (3)
- RE: PSE 6SN7 DC 6SN7 : small format breadboard - vinnie2 03:34:31 03/23/18 (2)
  - RE: PSE 6SN7 DC 6SN7 : small format breadboard - deathtube 667 07:08:01 03/23/18 (1)
    - RE: PSE 6SN7 DC 6SN7 : small format breadboard - vinnie2 09:00:11 03/23/18 (0)
XLR input grounding to 1944 Webster Electric Amplifier (6069A) - tutor turtle 04:35:47 03/22/18 (16)
- Here's how to do it. - Ralph 14:09:12 03/22/18 (1)
  - RE: Here's how to do it. - tutor turtle 06:26:08 03/24/18 (0)
- Pin 1 to Chassis! - gusser 12:57:59 03/22/18 (4)
  - RE: Pin 1 to Chassis! - rage 12:51:19 03/26/18 (0)
  - RE: Pin 1 to Chassis! - tutor turtle 16:47:21 03/22/18 (0)
  - RE: Pin 1 to Chassis! - tutor turtle 16:45:45 03/22/18 (0)
  - RE: Pin 1 to Chassis! - tutor turtle 14:47:29 03/22/18 (0)
- RE: XLR input grounding to 1944 Webster Electric Amplifier (6069A) - rage 09:31:07 03/22/18 (2)
  - RE: XLR input grounding to 1944 Webster Electric Amplifier (6069A) - tutor turtle 09:40:57 03/22/18 (1)
    - RE: XLR input grounding to 1944 Webster Electric Amplifier (6069A) - rage 09:48:45 03/22/18 (0)
- RE: XLR input grounding to 1944 Webster Electric Amplifier (6069A) - Tre' 08:39:47 03/22/18 (2)
  - RE: XLR input grounding to 1944 Webster Electric Amplifier (6069A) - tutor turtle 09:36:22 03/22/18 (1)
    - RE: XLR input grounding to 1944 Webster Electric Amplifier (6069A) - Tre' 10:09:41 03/22/18 (0)
- RE: XLR input grounding to 1944 Webster Electric Amplifier (6069A) - Chip647 08:14:51 03/22/18 (2)
  - RE: XLR input grounding to 1944 Webster Electric Amplifier (6069A) - tutor turtle 09:49:46 03/22/18 (0)
  - RE: XLR input grounding to 1944 Webster Electric Amplifier (6069A) - tutor turtle 09:37:44 03/22/18 (0)
ye gads .... - vinnie2 13:39:29 03/19/18 (29)
- update - vinnie2 07:21:44 03/21/18 (0)
- Do you have a tube rectifier? - DAK 11:17:45 03/20/18 (1)
  - RE: Do you have a tube rectifier? - vinnie2 14:22:52 03/20/18 (0)
- RE: ye gads .... - awkwardbydesign 10:10:35 03/20/18 (1)
  - RE: ye gads .... - vinnie2 14:23:46 03/20/18 (0)
- Gadzooks... - Uncle Mike 07:31:18 03/20/18 (0)
- RE: ye gads .... - Chip647 16:19:39 03/19/18 (22)
  - RE: ye gads .... - vinnie2 18:26:16 03/19/18 (21)
    - RE: ye gads .... - Chip647 04:55:24 03/20/18 (20)
      - RE: ye gads .... - vinnie2 05:02:29 03/20/18 (19)
        
        RE: ye gads .... - Tre' 11:48:30 03/20/18 (13)
        
        RE: ye gads .... - vinnie2 12:59:49 03/20/18 (12)
        
        RE: ye gads .... - Tre' 13:25:54 03/20/18 (11)
        
        RE: ye gads .... - vinnie2 14:20:42 03/20/18 (10)
        
        is the PT's CT grounded? - buffy 15:09:45 03/20/18 (9)
        
        RE: is the PT's CT grounded? - vinnie2 18:06:12 03/20/18 (8)
        
        RE: is the PT's CT grounded? - 91derlust 04:10:49 03/24/18 (3)
        
        RE: is the PT's CT grounded? - vinnie2 05:00:38 03/24/18 (2)
        
        Gotcha. - 91derlust 02:25:13 03/25/18 (1)
        
        RE: Gotcha. - vinnie2 04:05:58 03/25/18 (0)
        
        suggestion - FenderLover 23:16:57 03/20/18 (3)
        
        RE: suggestion - vinnie2 07:28:57 03/21/18 (2)
        
        Measure static DCR from each secondary end to CT. - FenderLover 07:56:08 03/21/18 (1)
        
        RE: Measure static DCR from each secondary end to CT. - vinnie2 10:38:28 03/21/18 (0)
        
        "my variac takes a big jump up" - Triode_Kingdom 10:58:41 03/20/18 (2)
        
        RE: "my variac takes a big jump up" - vinnie2 13:03:43 03/20/18 (1)
        
        Correction - Triode_Kingdom 14:55:47 03/20/18 (0)
        
        RE: ye gads .... - Chip647 05:10:29 03/20/18 (1)
        
        RE: ye gads .... - vinnie2 05:21:17 03/20/18 (0)
dump preamp question - rage 10:12:54 03/19/18 (2)
- RE: dump preamp question - Paul Joppa 11:03:07 03/19/18 (1)
  - RE: dump preamp question - rage 14:26:05 03/19/18 (0)
Resistors - xaudiomanx 09:55:03 03/19/18 (32)
- 125k Dale metal films PTF series sure look interesting - Ignaz6 20:59:36 03/19/18 (22)
  - RE: 125k Dale metal films PTF series sure look interesting - tube wrangler 21:51:24 03/19/18 (21)
    - RE: 125k Dale metal films PTF series sure look interesting - Eli Duttman 22:38:07 03/19/18 (20)
      - RE: 125k Dale metal films PTF series sure look interesting - tube wrangler 18:24:43 03/20/18 (19)
        
        Non inductive is a bad thing in a RESISTOR? - Ignaz6 09:02:08 03/21/18 (18)
        
        RE: Non inductive is a bad thing in a RESISTOR? - tube wrangler 11:53:44 03/21/18 (17)
        
        RE: Non inductive is a bad thing in a RESISTOR? - Tre' 13:48:53 03/21/18 (16)
        
        RE: Non inductive is a bad thing in a RESISTOR? - tube wrangler 16:30:54 03/21/18 (15)
        
        RE: Non inductive is a bad thing in a RESISTOR? - Tre' 19:28:31 03/21/18 (11)
        
        RE: Non inductive is a bad thing in a RESISTOR? - tube wrangler 09:53:29 03/22/18 (10)
        
        RE: Non inductive is a bad thing in a RESISTOR? - Tre' 10:16:19 03/22/18 (9)
        
        RE: Non inductive is a bad thing in a RESISTOR? - tube wrangler 10:22:47 03/22/18 (8)
        
        RE: Non inductive is a bad thing in a RESISTOR? - Tre' 10:36:28 03/22/18 (7)
        
        RE: Non inductive is a bad thing in a RESISTOR? - tube wrangler 00:25:00 03/23/18 (6)
        
        They do sound like crap - Stephen R 10:30:19 03/25/18 (4)
        
        RE: They do sound like crap - Ignaz6 15:00:06 03/26/18 (1)
        
        RE: They do sound like crap - Stephen R 15:59:21 03/26/18 (0)
        
        RE: They do sound like crap - PakProtector 13:09:43 03/26/18 (1)
        
        RE: They do sound like crap - Stephen R 13:20:24 03/26/18 (0)
        
        RE: Non inductive is a bad thing in a RESISTOR? - Tre' 06:58:39 03/23/18 (0)
        
        RE: Non inductive is a bad thing in a RESISTOR? - elblanco 16:45:49 03/21/18 (2)
        
        RE: Non inductive is a bad thing in a RESISTOR? - tube wrangler 09:41:06 03/22/18 (1)
        
        RE: Non inductive is a bad thing in a RESISTOR? - Triode_Kingdom 08:23:16 03/23/18 (0)
- RE: Resistors - Ignaz6 20:42:27 03/19/18 (1)
  - RE: Resistors - fetko 07:04:22 03/23/18 (0)
- RE: Resistors - Ignaz6 16:53:31 03/19/18 (3)
  - RE: Resistors - Eli Duttman 18:52:31 03/19/18 (0)
  - RE: Resistors - xaudiomanx 18:38:07 03/19/18 (1)
    - RE: Resistors - Eli Duttman 18:56:16 03/19/18 (0)
- RE: Resistors - xaudiomanx 14:27:24 03/19/18 (0)
- Digi-Key Shipping Can Be Free - FlaCharlie 11:41:16 03/19/18 (0)
- RE: Resistors - Eli Duttman 10:52:31 03/19/18 (0)
List of output tubes for class B - used-hifi 18:18:02 03/18/18 (21)
- Are you building a transmitter? - FenderLover 07:46:41 03/19/18 (0)
- RE: List of output tubes for class B - Ian L 23:33:42 03/18/18 (0)
- RE: List of output tubes for class B - Chip647 20:45:24 03/18/18 (13)
  - RE: List of output tubes for class B - gusser 10:46:44 03/19/18 (0)
  - RE: List of output tubes for class B - Triode_Kingdom 07:24:14 03/19/18 (8)
    - RE: List of output tubes for class B - used-hifi 14:36:33 03/19/18 (7)
      - RE: List of output tubes for class B - Triode_Kingdom 10:49:47 03/20/18 (6)
        
        errr...No - PakProtector 13:43:30 03/20/18 (0)
        
        RE: List of output tubes for class B - Tre' 11:52:27 03/20/18 (0)
        
        " "B2" is not a legitimate classification"--another perspective on legitimacy .... - Steve O 11:44:57 03/20/18 (3)
        
        Now that is proper referencing...:) - PakProtector 13:45:55 03/20/18 (2)
        
        I stand corrected - Triode_Kingdom 15:01:41 03/20/18 (1)
        
        RE: I stand corrected - PakProtector 15:51:54 03/20/18 (0)
  - RE: List of output tubes for class B - used-hifi 20:57:54 03/18/18 (2)
    - RE: List of output tubes for class B - Eli Duttman 02:42:16 03/19/18 (1)
      - RE: List of output tubes for class B - PakProtector 17:21:20 03/19/18 (0)
- 809 - zero bias B2 (nt) - Steve O 19:10:44 03/18/18 (0)
- RE: List of output tubes for class B - Triode_Kingdom 18:43:49 03/18/18 (0)
- RE: List of output tubes for class B - Paul Joppa 18:43:14 03/18/18 (2)
  - RE: List of output tubes for class B - PakProtector 03:23:26 03/19/18 (1)
    - RE: List of output tubes for class B - used-hifi 11:36:32 03/19/18 (0)
Transcendar - thermionic addictions 16:29:16 03/18/18 (7)
- RE: Transcendar - Ian L 12:03:34 03/19/18 (0)
- RE: Transcendar - Ian L 00:02:51 03/19/18 (0)
- RE: Dont bother - deafbykhorns 18:18:14 03/18/18 (0)
- RE: Transcendar - petercapo 17:18:50 03/18/18 (3)
  - RE: Transcendar - thermionic addictions 17:57:08 03/18/18 (1)
    - RE: Transcendar - petercapo 20:33:15 03/18/18 (0)
  - RE: Transcendar - thermionic addictions 17:33:38 03/18/18 (0)
????????? about RIAA compnents - xaudiomanx 17:28:12 03/16/18 (49)
- Flavor? - twystd 22:01:28 03/17/18 (10)
  - RE: Flavor? - tube wrangler 14:12:32 03/18/18 (0)
  - RE: Flavor? - TomWh 06:57:38 03/18/18 (7)
    - RE: Flavor? - twystd 10:38:40 03/18/18 (6)
      - Agreed-nt - Cleantimestream 17:40:29 03/18/18 (0)
      - RE: Flavor? - Lew 12:48:46 03/18/18 (4)
        
        RE: Flavor? - twystd 19:35:16 03/18/18 (3)
        
        RE: Flavor? - Triode_Kingdom 11:17:05 03/20/18 (2)
        
        RE: Flavor? - twystd 12:46:36 03/20/18 (1)
        
        RE: Flavor? - Triode_Kingdom 08:12:46 03/21/18 (0)
  - +1 nt - Stephen R 01:42:33 03/18/18 (0)
- RE: ????????? about RIAA compnents - TomWh 17:46:21 03/17/18 (12)
  - Incredible. - Stephen R 12:33:19 03/18/18 (2)
    - RE: Incredible. - TomWh 19:05:00 03/18/18 (1)
      - RE: Incredible. - Stephen R 10:03:48 03/20/18 (0)
  - RE: ????????? about RIAA compnents - Tre' 08:00:09 03/18/18 (7)
    - RE: ????????? about RIAA compnents - Stephen R 10:20:13 03/18/18 (4)
      - RE: ????????? about RIAA compnents - Tre' 11:34:48 03/18/18 (2)
        
        RE: ????????? about RIAA compnents - tube wrangler 14:28:41 03/18/18 (0)
        
        RE: ????????? about RIAA compnents - Stephen R 12:02:24 03/18/18 (0)
      - RE: ????????? about RIAA compnents - twystd 11:04:17 03/18/18 (0)
    - RE: ????????? about RIAA compnents - TomWh 08:38:12 03/18/18 (1)
      - RE: ????????? about RIAA compnents - Tre' 09:24:54 03/18/18 (0)
  - Wowsers! nt. - 91derlust 23:11:36 03/17/18 (0)
- RE: ????????? about RIAA compnents - Salectric 12:32:33 03/17/18 (0)
- RE: ????????? about RIAA compnents - tube wrangler 12:21:14 03/17/18 (4)
  - Gospel here! (nt) - Triode_Kingdom 14:26:33 03/17/18 (3)
    - RE: Gospel here! (nt) - Eli Duttman 19:07:49 03/17/18 (2)
      - Yes. - richardl 11:14:37 03/18/18 (0)
      - RE: Gospel here! (nt) - tube wrangler 21:49:31 03/17/18 (0)
- RE: ????????? about RIAA compnents - Triode_Kingdom 07:00:36 03/17/18 (16)
  - They are measureable - Stephen R 12:13:40 03/17/18 (15)
    - RE: Nice Post - TomWh 07:26:07 03/18/18 (1)
      - RE: Nice Post - tube wrangler 14:34:27 03/18/18 (0)
    - There are plenty of measurers that show they are the same - richardl 15:23:35 03/17/18 (1)
      - RE: There are plenty of measurers that show they are the same - Stephen R 01:40:42 03/18/18 (0)
    - RE: They are measureable - Triode_Kingdom 14:25:30 03/17/18 (10)
      - RE: They are measureable - 91derlust 23:03:58 03/17/18 (9)
        
        RE: They are measureable - Triode_Kingdom 07:41:53 03/18/18 (8)
        
        RE: They are measureable - Stephen R 10:15:45 03/18/18 (7)
        
        RE: They are measureable - Triode_Kingdom 14:44:13 03/18/18 (6)
        
        RE: They are measureable - Stephen R 14:56:55 03/18/18 (5)
        
        RE: They are measureable - Triode_Kingdom 18:37:54 03/18/18 (4)
        
        RE: They are measureable - Stephen R 00:52:52 03/19/18 (3)
        
        No, they are not measurable - Triode_Kingdom 07:32:22 03/19/18 (2)
        
        Now I'm really confused - Stephen R 10:36:27 03/19/18 (1)
        
        RE: Now I'm really confused - Triode_Kingdom 10:40:01 03/20/18 (0)
- RE: ????????? about RIAA compnents - Stephen R 06:55:50 03/17/18 (0)
- RE: ????????? about RIAA compnents - Tre' 17:53:27 03/16/18 (0)
Marchand xm26 tube rolling - rschroeder6@new.rr.com 15:56:26 03/16/18 (1)
- RE: Marchand xm26 tube rolling - Chip647 17:36:34 03/16/18 (0)
Why can't you look at porn like a normal husband? - pixelphoto 09:26:59 03/16/18 (3)
- Looks like spousal abuse ..... - Uncle Mike 13:19:49 03/16/18 (0)
- RE: Why can't you look at porn like a normal husband? - deathtube 667 11:17:17 03/16/18 (1)
  - RE: Why can't you look at porn like a normal husband? - buffy 12:08:07 03/16/18 (0)
Need Advice - Tubenstein 18:57:37 03/15/18 (7)
- RE: Need Advice - Stephen R 01:28:17 03/16/18 (0)
- RE: Need Advice - Stephen R 01:13:55 03/16/18 (5)
  - RE: Need Advice - Tubenstein 01:25:21 03/16/18 (4)
    - RE: Need Advice - Stephen R 13:06:16 03/16/18 (0)
    - Right. (nt) - Tre' 11:06:31 03/16/18 (0)
    - RE: Need Advice - Paul Joppa 10:44:49 03/16/18 (0)
    - RE: Need Advice - dave slagle 08:54:00 03/16/18 (0)
Tweeter Puzzle - Lee of Omaha 16:41:04 03/15/18 (10)
- RE: Tweeter Puzzle - 6AS7_6SN7 01:43:14 03/18/18 (0)
- Check the DCR of the two. - FenderLover 18:05:32 03/15/18 (8)
  - RE: Check the DCR of the two. - Lee of Omaha 18:25:58 03/15/18 (7)
    - What's the impedance of each tweeter? - FenderLover 18:52:34 03/15/18 (6)
      - RE: What's the impedance of each tweeter? - Lee of Omaha 18:59:12 03/15/18 (5)
        
        RE: What's the impedance of each tweeter? - FenderLover 19:32:13 03/15/18 (4)
        
        Is not the tweeter in the HPM100 a very unconventional... - Steve O 06:30:05 03/16/18 (3)
        
        RE: Is not the tweeter in the HPM100 a very unconventional... - Lee of Omaha 06:51:08 03/16/18 (2)
        
        RE: Is not the tweeter in the HPM100 a very unconventional... - Crazy Dave 09:17:34 03/16/18 (0)
        
        Uh-Oh (nt) - Steve O 07:21:09 03/16/18 (0)
Tube rectification at work... - 6AS7_6SN7 04:09:19 03/14/18 (0)
Connector question preamp.... - popsy 15:36:54 03/13/18 (7)
- RE: Connector question preamp.... - xaudiomanx 16:11:16 03/13/18 (6)
  - Sorry, its through the speakers, nothing visually happening.. - popsy 16:14:03 03/13/18 (5)
    - RE: Sorry, its through the speakers, nothing visually happening.. - xaudiomanx 17:06:41 03/13/18 (4)
      - one speaker, did not occur with the old tubes....pr - popsy 17:10:00 03/13/18 (3)
        
        RE: one speaker, did not occur with the old tubes....pr - xaudiomanx 17:32:50 03/13/18 (2)
        
        thanks for the ideas but.... - popsy 17:37:21 03/13/18 (1)
        
        RE: thanks for the ideas but.... - xaudiomanx 21:01:58 03/13/18 (0)
2e24 Triode Strapped - rcollege 08:39:52 03/13/18 (10)
- RE: 2e24 Triode Strapped - rcollege 09:20:26 03/21/18 (0)
- Another One - FlaCharlie 09:06:03 03/16/18 (6)
  - Another One - Cleantimestream 09:38:36 03/16/18 (5)
    - RE: Another One - Triode_Kingdom 07:14:39 03/17/18 (4)
      - RE: Another One - rcollege 09:25:46 03/21/18 (0)
      - Tango... 14k. For my 801 amp. The best sounding thoriated tungsten?-nT - Cleantimestream 06:14:42 03/20/18 (0)
      - RE: 14k OT - FlaCharlie 08:39:59 03/17/18 (1)
        
        RE: 14k OT - Cleantimestream 15:15:58 03/20/18 (0)
- RE: 2e24 Triode Strapped - FlaCharlie 08:19:29 03/16/18 (0)
- How about 811 or 809... DHT obscure... A bit hard to drive, though- - Cleantimestream 09:54:46 03/14/18 (0)
tweaking tube buffer: theoretical question - paco 13:51:56 03/12/18 (5)
- RE: tweaking tube buffer: theoretical question - tubular.well 16:04:53 03/14/18 (0)
- If it's a gainless buffer and it's a cathode follower, upping the PSU storage will have an effect. - Timbo in Oz 20:02:47 03/13/18 (0)
- RE: tweaking tube buffer: theoretical question - Charlie8521 05:32:36 03/13/18 (2)
  - internals pic - paco 04:30:44 03/14/18 (1)
    - RE: internals pic - Audio Pete 14:20:31 04/13/18 (0)
What is the B+? - Tube747 01:20:01 03/12/18 (3)
- RE: What is the B+? - FenderLover 07:55:34 03/12/18 (0)
- RE: What is the B+? - euro21 02:48:25 03/12/18 (1)
  - RE: What is the B+? - Tube747 03:42:30 03/12/18 (0)
ST 70 Low Voltages - Dingojazz 20:33:58 03/11/18 (31)
- If your power transformer is OK.... - Tre' 13:49:49 03/13/18 (25)
  - Without tubes - Dingojazz 12:46:26 03/14/18 (24)
    - RE: Without tubes - Tre' 13:54:57 03/14/18 (23)
      - Pin 8 - Dingojazz 15:57:08 03/14/18 (21)
        
        My post didn't show - Tre' 16:10:57 03/14/18 (20)
        
        Useful suggestion... - Dingojazz 18:28:10 03/14/18 (19)
        
        RE: Useful suggestion... - Tre' 18:32:38 03/14/18 (18)
        
        Schematic - Dingojazz 20:53:58 03/14/18 (16)
        
        Wiring Diagram - Dingojazz 20:56:59 03/14/18 (15)
        
        RE: Wiring Diagram - Tre' 07:53:40 03/15/18 (14)
        
        RE: Wiring Diagram - Triode_Kingdom 08:17:01 03/15/18 (13)
        
        RE: Wiring Diagram - Tre' 08:55:32 03/15/18 (12)
        
        RE: Wiring Diagram - Dingojazz 16:43:59 03/15/18 (11)
        
        Voltage checks - Dingojazz 17:19:31 03/15/18 (10)
        
        RE: Voltage checks - Tre' 18:40:03 03/15/18 (9)
        
        RE: Voltage checks - Dingojazz 20:00:41 03/15/18 (8)
        
        RE: Voltage checks - Tre' 07:11:16 03/16/18 (7)
        
        Ok, I'll see if I can swing it - Dingojazz 13:44:55 03/16/18 (6)
        
        Current reading - Dingojazz 14:05:24 03/16/18 (5)
        
        RE: Current reading - Tre' 14:44:27 03/16/18 (4)
        
        Ok - Dingojazz 15:21:23 03/16/18 (3)
        
        RE: Ok - Tre' 15:40:09 03/16/18 (2)
        
        Yes - Dingojazz 10:19:56 03/18/18 (1)
        
        That great news! I believe you have found your problem. (nt) - Tre' 16:43:06 03/18/18 (0)
        
        I might be able to send a - Dingojazz 20:30:38 03/14/18 (0)
      - - Tre' 15:42:01 03/14/18 (0)
- RE: ST 70 Low Voltages - Tre' 21:12:38 03/12/18 (1)
  - AC voltages appear - Dingojazz 12:24:26 03/14/18 (0)
- RE: ST 70 Low Voltages - DAK 22:20:50 03/11/18 (2)
  - Low Voltages - Dingojazz 18:40:12 03/12/18 (1)
    - RE: Low Voltages - FenderLover 18:42:48 03/12/18 (0)
Stealth Coupling caps - xaudiomanx 12:34:42 03/10/18 (8)
- RE: Stealth Coupling caps - sherod 12:48:49 03/15/18 (2)
  - I love the name "Uptone" - Lew 17:42:49 03/15/18 (1)
    - They tried "Upchuck" first, but didn't sell so well... nt - Triode_Kingdom 07:18:29 03/17/18 (0)
- Vcap... Copper foil/teflon_nT - Cleantimestream 13:55:51 03/11/18 (0)
- RE: Stealth Coupling caps - Frihed89 12:54:38 03/11/18 (0)
- The Best Cap is NO Cap - Triode_Kingdom 12:40:05 03/11/18 (2)
  - RE: The Best Cap is NO Cap - used-hifi 12:56:02 03/11/18 (1)
    - RE: The Best Cap is NO Cap - xaudiomanx 05:26:01 03/12/18 (0)
if you ever wanted to try amorphous OP on the cheap - used-hifi 11:08:17 03/10/18 (8)
- NP Acoustic, Vietnam, for amorphous OPTs - andy evans 04:05:43 03/11/18 (4)
  - RE: NP Acoustic, Vietnam, for amorphous OPTs - rockdoc 20:50:39 03/19/18 (0)
  - RE: NP Acoustic, Vietnam, for amorphous OPTs - tube wrangler 13:34:53 03/11/18 (0)
  - RE: NP Acoustic, Vietnam, for amorphous OPTs - used-hifi 06:54:10 03/11/18 (1)
    - RE: NP Acoustic, Vietnam, for amorphous OPTs - dkacoustic1611 21:04:31 08/03/19 (0)
- RE: if you ever wanted to try amorphous OP on the cheap - Triode_Kingdom 14:51:20 03/10/18 (2)
  - RE: if you ever wanted to try amorphous OP on the cheap - GeorgePope 03:15:12 03/11/18 (0)
  - " NIB , never use ." True that (nt) - Chip647 15:30:59 03/10/18 (0)
Aikido Balanced Linestage - tubejack 05:52:33 03/09/18 (1)
- RE: Aikido Balanced Linestage - xaudiomanx 10:31:56 03/09/18 (0)
Economy current source for PP current bias - 6AS7_6SN7 04:07:24 03/09/18 (3)
- RE: Economy current source for PP current bias - Jim Doyle 10:45:52 03/10/18 (1)
  - RE: Economy current source for PP current bias - 6AS7_6SN7 01:39:52 03/12/18 (0)
- RE: Economy current source for PP current bias - JKT 12:36:36 03/09/18 (0)
ST 70 Amp won't bias - Dingojazz 18:21:35 03/08/18 (4)
- Low voltages - Dingojazz 16:07:20 03/11/18 (0)
- RE: ST 70 Amp won't bias - fredtr 07:11:19 03/10/18 (0)
- RE: ST 70 Amp won't bias - Caucasian Blackplate 20:16:20 03/08/18 (1)
  - Is the limit of your bias adjustment reached? - DAK 12:05:54 03/09/18 (0)
Do bypass caps really make a difference????? - xaudiomanx 10:06:21 03/08/18 (101)
- RE: Do bypass caps really make a difference????? - Hornlover 11:18:44 03/09/18 (0)
- RE: Do bypass caps really make a difference????? - deathtube 667 06:02:30 03/09/18 (8)
  - RE: Do bypass caps really make a difference????? - xaudiomanx 10:34:37 03/09/18 (7)
    - RE: Do bypass caps really make a difference????? - deathtube 667 11:53:04 03/09/18 (6)
      - RE: Do bypass caps really make a difference????? - Steve O 16:21:33 03/09/18 (3)
        
        RE: Do bypass caps really make a difference????? - 91derlust 17:45:14 03/09/18 (0)
        
        RE: Do bypass caps really make a difference????? - cpotl 16:41:23 03/09/18 (1)
        
        Brings to mind a proverb... - Steve O 16:48:55 03/09/18 (0)
      - RE: Do bypass caps really make a difference????? - used-hifi 13:40:20 03/09/18 (1)
        
        RE: Do bypass caps really make a difference????? - Eli Duttman 14:19:38 03/09/18 (0)
- I have had a lot of success with - Frihed89 02:36:13 03/09/18 (1)
  - RE: I have had a lot of success with - xaudiomanx 10:36:27 03/09/18 (0)
- RE: Do bypass caps really make a difference????? - Eli Duttman 17:57:07 03/08/18 (35)
  - RE: Do bypass caps really make a difference????? - Hornlover 09:55:13 03/09/18 (34)
    - RE: Do bypass caps really make a difference????? - tube wrangler 14:49:03 03/09/18 (30)
      - For the sake of clarification, please - Frihed89 16:09:02 03/09/18 (29)
        
        RE: For the sake of clarification, please - tube wrangler 21:27:03 03/09/18 (28)
        
        RE: For the sake of clarification, please - Tre' 06:37:55 03/10/18 (27)
        
        RE: For the sake of clarification, please - tube wrangler 14:47:57 03/10/18 (26)
        
        RE: For the sake of clarification, please - Tre' 17:28:28 03/10/18 (9)
        
        RE: For the sake of clarification, please - used-hifi 17:41:19 03/10/18 (8)
        
        RE: For the sake of clarification, please - Tre' 17:58:31 03/10/18 (7)
        
        RE: For the sake of clarification, please - used-hifi 18:07:41 03/10/18 (6)
        
        RE: For the sake of clarification, please - Tre' 18:18:59 03/10/18 (5)
        
        RE: For the sake of clarification, please - used-hifi 18:30:18 03/10/18 (4)
        
        RE: For the sake of clarification, please - Tre' 19:32:36 03/10/18 (3)
        
        RE: For the sake of clarification, please - used-hifi 07:05:29 03/11/18 (2)
        
        RE: For the sake of clarification, please - Tre' 07:31:16 03/11/18 (1)
        
        RE: For the sake of clarification, please - used-hifi 08:20:53 03/11/18 (0)
        
        RE: For the sake of clarification, please - xaudiomanx 15:23:27 03/10/18 (15)
        
        RE: For the sake of clarification, please - cpotl 17:02:59 03/10/18 (14)
        
        RE: For the sake of clarification, please - tube wrangler 22:29:56 03/10/18 (13)
        
        RE: For the sake of clarification, please - dave slagle 06:20:52 03/12/18 (1)
        
        RE: For the sake of clarification, please - tube wrangler 10:21:02 03/12/18 (0)
        
        Radiotron I believe stated 4.3 Henry as minimum critical-nT - Cleantimestream 14:04:22 03/11/18 (2)
        
        RE: Radiotron I believe stated 4.3 Henry as minimum critical-nT - Tre' 16:03:03 03/11/18 (1)
        
        RE: Radiotron I believe stated 4.3 Henry as minimum critical-nT - Cleantimestream 21:16:01 03/11/18 (0)
        
        RE: For the sake of clarification, please - Tre' 07:40:22 03/11/18 (7)
        
        RE: For the sake of clarification, please - tube wrangler 14:00:33 03/11/18 (6)
        
        "Choke input is when a choke is directly connected to a rectifier. " - Triode_Kingdom 07:07:53 03/13/18 (0)
        
        critical cap-input supply [filter] - Tre' 16:36:51 03/11/18 (4)
        
        RE: critical cap-input supply [filter] - tube wrangler 19:25:53 03/11/18 (3)
        
        RE: critical cap-input supply [filter] - PakProtector 01:48:32 03/12/18 (2)
        
        RE: critical cap-input supply [filter] - tube wrangler 09:48:54 03/12/18 (1)
        
        RE: critical cap-input supply [filter] - PakProtector 15:26:18 03/12/18 (0)
    - RE: Do bypass caps really make a difference????? - Eli Duttman 11:18:22 03/09/18 (2)
      - RE: Do bypass caps really make a difference????? - Hornlover 11:30:18 03/09/18 (1)
        
        Understood; no problem. (nt) - Eli Duttman 14:11:29 03/09/18 (0)
- RE: Do bypass caps really make a difference????? - Cleantimestream 16:38:25 03/08/18 (0)
- "1/5 the larger value rule" - Lew 16:11:06 03/08/18 (3)
  - RE: "1/5 the larger value rule" - xaudiomanx 19:24:51 03/08/18 (2)
    - RE: "1/5 the larger value rule" - Lew 09:47:10 03/09/18 (1)
      - RE: "1/5 the larger value rule" - Triode_Kingdom 07:56:57 03/10/18 (0)
- It's Simple to Test - Triode_Kingdom 13:34:06 03/08/18 (21)
  - if you can't see it... - Jim Dowdy 16:00:28 03/08/18 (18)
    - I think that you have it wrong - richardl 10:19:01 03/09/18 (2)
      - seeing vs not seeing - Jim Dowdy 10:29:23 03/09/18 (1)
        
        I understand now. - richardl 13:39:53 03/10/18 (0)
    - RE: if you can't see it... - Triode_Kingdom 19:36:35 03/08/18 (14)
      - RE: if you can't see it... - Stephen R 04:10:14 03/09/18 (8)
        
        Hmmmmmm... - Steve O 08:06:25 03/09/18 (6)
        
        RE: Hmmmmmm... - tube wrangler 15:19:17 03/09/18 (0)
        
        RE: Hmmmmmm... - Stephen R 08:22:53 03/09/18 (4)
        
        RE: Hmmmmmm... - Steve O 09:26:20 03/09/18 (3)
        
        RE: Hmmmmmm... - Stephen R 11:34:58 03/09/18 (2)
        
        Agree completely with that last bit (nt) - Steve O 12:18:00 03/09/18 (0)
        
        Words to Live By - Triode_Kingdom 12:11:49 03/09/18 (0)
        
        RE: if you can't see it... - cpotl 05:47:11 03/09/18 (0)
      - RE: if you can't see it... - tube wrangler 22:13:33 03/08/18 (4)
        
        RE: if you can't see it... - Triode_Kingdom 06:20:31 03/09/18 (3)
        
        RE: if you can't see it... - tube wrangler 15:32:56 03/09/18 (2)
        
        RE: if you can't see it... - Triode_Kingdom 07:05:29 03/10/18 (1)
        
        RE: if you can't see it... - tube wrangler 10:52:14 03/10/18 (0)
  - RE: It's Simple to Test - xaudiomanx 14:40:49 03/08/18 (1)
    - RE: It's Simple to Test - Triode_Kingdom 19:28:22 03/08/18 (0)
- IME for the last one or two PSU filter caps, a good idea. - Timbo in Oz 13:22:07 03/08/18 (0)
- RE: Do bypass caps really make a difference????? - Steve O 11:39:09 03/08/18 (7)
  - Which IMO... - PakProtector 11:02:45 03/17/18 (0)
  - RE: Do bypass caps really make a difference????? - xaudiomanx 14:44:03 03/08/18 (0)
  - RE: Do bypass caps really make a difference????? - richardl 12:02:32 03/08/18 (0)
  - RE: Do bypass caps really make a difference????? - Tre' 11:49:46 03/08/18 (3)
    - Did Lynn work for Tek? (nt) - Steve O 11:56:03 03/08/18 (2)
      - Yeah, I think he did. (nt) - Tre' 14:43:04 03/08/18 (1)
        
        Wouldn't be surprised if he was aware of or even responsible for that note (nt) - Steve O 15:14:03 03/08/18 (0)
- RE: Do bypass caps really make a difference????? - rage 11:19:19 03/08/18 (16)
  - RE: Do bypass caps really make a difference????? - tube wrangler 15:28:26 03/08/18 (15)
    - RE: Do bypass caps really make a difference????? - Tre' 21:41:19 03/08/18 (1)
      - RE: Do bypass caps really make a difference????? - tube wrangler 22:31:29 03/08/18 (0)
    - RE: Do bypass caps really make a difference????? - xaudiomanx 19:29:10 03/08/18 (1)
      - RE: Do bypass caps really make a difference????? - tube wrangler 22:58:53 03/08/18 (0)
    - So.... - dee eye why 17:38:42 03/08/18 (10)
      - RE: So.... - tube wrangler 23:04:28 03/08/18 (9)
        
        RE: So.... - Tre' 08:05:17 03/09/18 (8)
        
        RE: So.... - rogerh113 08:08:38 03/14/18 (3)
        
        RE: So.... - Tre' 17:07:03 03/14/18 (2)
        
        RE: So.... - rogerh113 18:06:43 03/14/18 (1)
        
        RE: So.... - used-hifi 09:00:15 03/15/18 (0)
        
        RE: composite signals ... - deathtube 667 08:43:50 03/09/18 (3)
        
        RE: composite signals ... - Tre' 09:45:43 03/09/18 (2)
        
        RE: composite signals ... - Lew 09:56:02 03/09/18 (1)
        
        RE: composite signals ... - tube wrangler 15:54:35 03/09/18 (0)

Threads started on or before 4/30/07 are archived Here.
Threads started on or before 4/15/07 are archived Here.
Threads started on or before 3/31/07 are archived Here.
Threads started on or before 3/15/07 are archived Here.
Threads started on or before 2/28/07 are archived Here.