|
Tech Square Technical and speculative discussion of amps, cables and other topics. |
|
|
|
Tech Square Technical and speculative discussion of amps, cables and other topics. |
|
In Reply to: Re: Optimizing Room Dimensions...... posted by andyr on July 22, 2004 at 04:28:38:
Thanks Andy. I'll get an e-mail out to you today. I followed another thread about a week ago and located a spreadsheet from Harman/JBL that calculates the nodes, but after reading the companion white paper I'm not sure I really know how to interpret the data.I also located some ratios yesterday and ran a few numbers. The ratios were as follows: (HxWxL)
1 x 1.4 x 1.39
1 x 1.28 x 1.54
1 x 1.6 x 2.33Using a 9 ft ceiling I ran the numbers on the third ratio and came up with 9 x 14.4 x 20.97. Your measurements would also work but I'm trying to keep the length as close to a max of 20 or 21 if possible. If I get much over that the rest of the rooms in the building start to get a little small. Also, with the dimensions I used I would still be able to put a small unfinished hallway around the room to isolate it and create somewhat of a room within a room.
I'm definitely open to suggestions.
Eat Mo' Hot Sauce,
crazychile
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: Optimizing Room Dimensions...... - crazychile 08:43:30 07/22/04 (2)
- Re: Optimizing Room Dimensions...... - Rich A. 23:24:34 08/03/04 (0)
- A Golden Ratio room is 1:1.618:2.618. (nt) - andyr 13:42:24 07/22/04 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
