|
Pro Audio Asylum Pro studio recording equipment and music production/industry. |
|
|
|
Pro Audio Asylum Pro studio recording equipment and music production/industry. |
|
In Reply to: Designing Phantom Power -Technical Considerations posted by DariusFranke@yahoo.com on October 30, 2005 at 09:23:27:
not a power supply decoupling resistor. I would recommend going to the Jensen TransformerWebsite.
http://www.jensen-transformers.com/apps_sc.html
Look in SCHEMATICS
APP AS016 and a bunch of other schematics have directions on how to implement it. You need to match the 6.8k resistors to better than .01 % with a digital VOM so buy more than two. Buy like a 100 and go through them. You can also buy a Power One or Condor 48 volt power supply that has an adjustment pot on it. Yes, you need a voltage regulator as a ripple filter. Some other schematics have LEDs and a charging cap and a switch. You just have to search and look around. Good luck! Ray
"Polarities are seldom aware of their polarness." Prospero
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- The two 6.8K resistors is a derived center tap... - grhughes 09:25:04 11/03/05 (2)
- Re: The two 6.8K resistors is a derived center tap... - Inmate51 08:54:55 11/14/05 (1)
- Thanks, Yea they work great! nt - grhughes 09:03:22 11/14/05 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
