In Reply to: RE: How to find Trickle Charger for LiFePO4 batteries (3.3V versions)? posted by Bob_C on December 3, 2015 at 19:59:58:
Since you're splitting hairs here, I will too.
With regards to the LiFEPO4 battery, jkeny (M) said,
"You want the ones with tabs already welded onto the battery ends as it makes it much easier to solder wires to."
So the charger + available accessories that I mentioned should be a better solution. The battery charger you linked to will not fit batteries with tabs attached to them... unless you pry the tabs off which defeats their purpose. ;-)
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- More precisely...................... - AbeCollins 22:42:15 12/03/15 (9)
- RE: More precisely...................... - chopper87@aol.com 06:50:18 12/04/15 (7)
- RE: More precisely...................... - AbeCollins 07:36:42 12/04/15 (6)
- RE: More precisely...................... - chopper87@aol.com 10:55:50 12/04/15 (5)
- RE: More precisely...................... - adam@denderapartners.com 11:27:43 12/04/15 (4)
- RE: More precisely...................... - chopper87@aol.com 12:33:39 12/04/15 (0)
- Thank you... - Chris Garrett 11:34:14 12/04/15 (2)
- RE: Thank you... - adam@denderapartners.com 11:40:09 12/04/15 (1)
- You obviously have a more in depth knowledge than I about this stuff... - Chris Garrett 11:49:53 12/04/15 (0)
- RE: More precisely...................... - Bob_C 01:21:46 12/04/15 (0)