|
OTL Asylum OTL, Output Transformerless Amplifier User Group. |
|
|
|
OTL Asylum OTL, Output Transformerless Amplifier User Group. |
|
I turned on my M-60's this evening and there was a low volume hum coming from my right speaker for maybe 3-5 seconds. After starting my source I discovered no sound coming from the right channel.I briefly checked to see that the connections were still in place and everything seemed fine. I then checked the fuses and they appeared fine. After this I checked the bias value which was 0 and would not move off 0 with adjustment. It also appears that the DC offset will not budge off 0 either. I replaced the V4 driver tube and no change.
Any ideas?
I am really in the mood to listen tonight.
This post is made possible by the generous support of people like you and our sponsors:
Topic - Help...right channel M-60 not working... - Michael 18:00:10 02/08/02 (11)
- Re: Help...right channel M-60 not working... - mark 19:46:41 02/08/02 (10)
- Re: Help...right channel M-60 not working... - Michael 09:16:13 02/09/02 (9)
- Silly me... - Michael 13:47:15 02/09/02 (8)
- Re: Silly me... - mark 17:23:38 02/09/02 (7)
- Thanks Mark... - Michael 20:37:17 02/09/02 (6)
- Re: Emissions tester and the 6AS7G - Al Sekela 00:03:31 02/11/02 (0)
- Emissions tester and the 6AS7G - mark 16:33:49 02/10/02 (1)
- Re: Emissions tester and the 6AS7G - Paul Speltz 20:15:32 02/11/02 (0)
- Re: Thanks Mark... - Harry 14:06:30 02/10/02 (0)
- Re: Thanks Mark... - Al Sekela 12:16:30 02/10/02 (0)
- You're most welcome! - mark 20:48:26 02/09/02 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
