[
Home
] [
MQ News
] [
Products
] [
Distributors
] [
OEM
] [
Tech Corner
] [
Library
] [
DIY w/MQ Iron
] [
Contact Us
]
[
Audio Asylum
] [
Support Our Asylum
] [
Post Message
] [
Forum Rules
]
Text to find:
Previous Page
View:
Threads
eThreads
Sort:
Date
Update
Unanswered
Last:
Visit
24 Hours
48 Hours
Magnetics Library
- Last update, November 3, 2004
I'll be out on medical leave for a week or so....
-
mqracing
20:55:19 06/28/04
(11)
It could have been worse.
-
VoltSecond
09:24:59 07/04/04
(0)
Re: I'll be out on medical leave for a week or so....
-
SETA45
06:32:56 07/04/04
(0)
I sure hope the "third" leg is okay!
-
Russ57
07:14:08 07/01/04
(0)
Re: too bad! Speedy recovery!! n/t
-
Matts
19:06:26 06/29/04
(0)
Get well soon Mikey...
-
AnandR
14:52:56 06/29/04
(0)
For burn pain..
- John Chleapas
14:43:43 06/29/04
(0)
Sorry to hear it...
-
Jim Dowdy
09:41:28 06/29/04
(0)
Thats got to hurt....
-
keto
06:17:40 06/29/04
(0)
Re: I'll be out on medical leave for a week or so....
-
fitz
06:02:25 06/29/04
(0)
Get well soon!
-
Bas Horneman
02:23:31 06/29/04
(0)
Ouch!
-
VoltSecond
22:33:51 06/28/04
(0)
6N1P parafeed driver (link to schem)
-
keto
07:34:16 06/28/04
(0)
6C45 spud amp (pic)
-
keto
15:10:19 06/26/04
(
17
)
? about the TFA-204
-
keto
06:49:48 07/01/04
(2)
Re: ? about the TFA-204
-
Paul Joppa
17:45:46 07/01/04
(1)
Re: ? about the TFA-204
-
keto
20:46:04 07/01/04
(0)
new-spud (schem)
-
keto
14:29:58 06/28/04
(
3
)
spud update
-
keto
10:03:01 07/02/04
(0)
Re: new-spud (schem)
-
VoltSecond
23:08:33 06/28/04
(1)
Re: new-spud (schem)
-
keto
06:08:25 06/29/04
(0)
Re: 6C45 spud amp (pic)
-
AnandR
09:48:57 06/28/04
(
9
)
6C45 OP's
-
keto
10:20:57 06/28/04
(
8
)
Re: 6C45 OP's
-
JLH
04:49:04 06/29/04
(
7
)
Re: 6C45 OP's
-
AnandR
14:47:48 06/29/04
(
6
)
Re: 6C45 OP's
- James Neil
22:49:57 06/29/04
(
5
)
The 6C45Pi is to blame, not your choke.
-
JLH
05:24:27 06/30/04
(
4
)
Re: The 6C45Pi is to blame, not your choke.
- Kuei Yang Wang
07:36:44 07/01/04
(0)
Re: The 6C45Pi is to blame, not your choke.
-
AnandR
09:20:25 06/30/04
(0)
Of course the picture will change if...
-
Brian C.
05:34:44 06/30/04
(1)
brilliant
-
keto
18:33:22 06/30/04
(0)
RH parafeed- question for Mike
-
eelind
02:11:06 06/26/04
(0)
I'll bee out until Monday evening....
-
MQracing
21:19:38 06/24/04
(0)
Dimensions and weight of the RH Transformers
-
Ejam
17:33:16 06/24/04
(
5
)
Re: Dimensions and weight of the RH Transformers
-
MQracing
18:27:18 06/24/04
(
4
)
Re: Dimensions and weight of the RH Transformers
-
Ejam
18:23:26 06/25/04
(
3
)
Re: Dimensions and weight of the RH Transformers
-
harry
23:48:15 09/05/04
(0)
Re: Dimensions and weight of the RH Transformers
-
harry
23:47:25 09/05/04
(0)
Re: Dimensions and weight of the RH Transformers
-
mqracing
21:05:22 06/28/04
(0)
Ping G - 6V6 Parafeed
-
fitz
07:42:47 06/24/04
(
3
)
They are called grid stoppers and are usually of the
-
Bas Horneman
14:08:33 06/24/04
(2)
Re: They are called grid stoppers and are usually of the
-
G
18:31:59 06/27/04
(0)
Thanks for the info Bas (nt)
-
fitz
05:54:03 06/25/04
(0)
has anyone received their Robin Hoods yet?
-
mqracing
19:24:05 06/23/04
(0)
RH40 IN Simple84
-
mgzny
08:09:18 06/22/04
(2)
links to Robin Hood
-
MQracing
12:20:21 06/22/04
(1)
free incest mpegs
- namasa87
05:22:17 09/04/04
(0)
the MQ forestry project
-
mqracing
20:01:35 06/21/04
(
15
)
Re: the MQ forestry project
-
Nick F
07:23:02 06/23/04
(1)
Re: the MQ forestry project
-
tcain
09:37:20 06/23/04
(0)
that maple
-
keto
20:21:39 06/22/04
(0)
Re: the MQ forestry project
-
Jeff Lessard
09:57:50 06/22/04
(
11
)
Hate to be a stick in the mud, but,
-
CharleyW
11:12:36 06/22/04
(
10
)
Re: Hate to be a stick in the mud, but,
-
Jeff Lessard
11:57:47 06/22/04
(
9
)
I'm strictly an acoustic guy, although,
-
CharleyW
02:40:31 06/24/04
(0)
Forgot the put in the link...
-
Jeff Lessard
12:03:53 06/22/04
(
7
)
Re: Forgot the put in the link...
-
Seth Hensel
14:50:55 06/22/04
(
6
)
It's coming... it's coming...
-
Jeff Lessard
18:54:08 06/22/04
(
5
)
Re: It's coming....Isnt it? Indeed. Right? I-RONS!
-
mobile homeless
10:54:05 06/23/04
(
4
)
Re: It's coming....Isnt it? Indeed. Right? I-RONS!
-
Jeff Lessard
13:12:58 06/23/04
(
3
)
EVERYONE is waiting for you guys to post that article!
-
sunnysal
15:51:22 06/24/04
(2)
Re: EVERYONE is waiting for you guys to post that article!
-
Jeff Lessard
22:04:49 06/24/04
(1)
Moi Aussi!
-
sunnysal
09:48:26 06/25/04
(0)
see you guys on Tuesday
-
MQracing
20:18:18 06/18/04
(0)
Simple 84
-
Gordon Rankin
10:44:59 06/18/04
(
13
)
Sweet!
-
Paul Joppa
10:48:35 06/21/04
(
8
)
Re: Sweet!
-
Eli Duttman
07:03:25 06/22/04
(0)
PGP 8.1 current ratings
-
mqracing
19:26:23 06/21/04
(0)
Re: Sweet!- some answers
-
Gordon Rankin
13:46:59 06/21/04
(
5
)
Re: Sweet!- some answers
-
Paul Joppa
16:08:37 06/22/04
(0)
Yeah - but SE UL really kicks ass in a guitar amp! (nt)
-
Jim Dowdy
22:11:06 06/21/04
(2)
In tests only 1 out of 10 ejoyed it
-
Gordon Rankin
09:59:06 06/22/04
(1)
Well, there were only two of us...
-
Jim Dowdy
14:23:14 06/22/04
(0)
Re: Sweet!- some answers
-
GSI
16:09:10 06/21/04
(0)
Re: Simple 84
-
mqracing
13:18:22 06/18/04
(2)
Re: Simple 84- some answers
-
Gordon Rankin
13:43:15 06/18/04
(1)
Re: Simple 84- some answers
-
Paul Joppa
17:40:58 06/18/04
(0)
That looks pretty elegant Gordon!
-
Bas Horneman
13:07:49 06/18/04
(0)
Mike - Paramour/2004jrs/cap placement question
-
TNich
09:24:55 06/18/04
(
3
)
Moved the cap this weekend
-
TNich
05:54:54 06/28/04
(0)
Re: Mike - Paramour/2004jrs/cap placement question
-
Paul Joppa
08:39:07 06/19/04
(1)
Re: Mike - Paramour/2004jrs/cap placement question
-
calsaint
19:53:46 06/26/04
(0)
Another mayby dumb transformer question.
-
pufff
10:51:47 06/17/04
(3)
Re: Another mayby dumb transformer question.
-
mqracing
19:40:22 06/21/04
(0)
Taps aren't easy.
-
VoltSecond
22:06:40 06/17/04
(0)
not sooo dumb
-
pistoljoe
11:01:32 06/17/04
(0)
PGP8.1 350-0-350 vac+ full-wave bridge?
-
keto
19:39:13 06/16/04
(0)
a modest proposal
-
Doc B.
08:30:54 06/16/04
(50)
Re: a modest proposal
- another take on B+ delay
07:34:55 06/25/04
(0)
B+ delay?
-
keto
07:14:33 06/23/04
(2)
long skinny
-
rodneyAB
10:00:58 06/23/04
(1)
Re: long skinny
-
keto
13:50:09 06/23/04
(0)
*WAY* too complex
-
Sector-7G
19:18:35 06/21/04
(2)
hey dougie, love ya but....
-
MQracing
06:33:57 06/22/04
(1)
thanks Mike
-
Doc B.
10:17:57 06/22/04
(0)
Re: a modest proposal
- Smoothplate
08:33:08 06/19/04
(7)
6N1P
-
Paul Joppa
15:11:51 06/19/04
(6)
a plate choke for PJ
-
MQracing
06:22:52 06/22/04
(4)
Amazing!
-
Paul Joppa
15:55:28 06/22/04
(3)
Re: Amazing!
-
keto
06:43:32 06/26/04
(0)
careful.....
-
MQracing
17:25:17 06/22/04
(0)
Re: Amazing!
-
Doc B.
16:20:30 06/22/04
(0)
Re: 6N1P
-
Doc B.
11:20:23 06/21/04
(0)
Re: a modest proposal
-
eyes
10:04:00 06/17/04
(2)
Heavy, man ...
-
Paul Joppa
10:47:47 06/17/04
(0)
Re: a modest proposal
-
Doc B.
10:45:51 06/17/04
(0)
Re: a modest proposal
-
eyes
10:01:42 06/17/04
(0)
mapmakers?
-
Doc B.
17:10:12 06/16/04
(2)
Would love to help...but the shunt regged stuff
-
Bas Horneman
17:12:38 06/16/04
(1)
Re: Would love to help...but the shunt regged stuff
-
Dave Davenport
17:25:40 06/16/04
(0)
eXcited...
-
rodneyAB
11:46:30 06/16/04
(2)
Re: eXcited...
-
Doc B.
12:39:22 06/16/04
(1)
Re: eXcited...
-
rodneyAB
13:40:17 06/16/04
(0)
Iron fist, velvet glove?
-
Paul Joppa
09:34:51 06/16/04
(
24
)
Common Mode Choke on a filament.
-
VoltSecond
20:09:12 06/18/04
(0)
What about the RH-PF OT instead of the EXO-50?
-
soulcargo
16:53:47 06/18/04
(1)
Re: What about the RH-PF OT instead of the EXO-50?
-
Doc B.
17:21:39 06/18/04
(0)
Yeah, but
-
Doc B.
18:45:25 06/16/04
(
3
)
Re: Yeah, but
-
Paul Joppa
11:06:41 06/17/04
(2)
Re: Yeah, but
-
Doc B.
11:19:11 06/18/04
(1)
Re: Yeah!
-
Paul Joppa
18:25:45 06/18/04
(0)
Re: Iron fist, velvet glove?
-
rodneyAB
12:00:50 06/16/04
(1)
Re: Iron fist, velvet glove?
-
Paul Joppa
16:22:28 06/16/04
(0)
Re: Iron fist, velvet glove?
-
Jeff Lessard
11:49:36 06/16/04
(7)
Will Mike still make EXO-004s?
-
Paul Joppa
16:25:13 06/16/04
(6)
EXO-003's and 004's....
-
MQracing
17:42:18 06/16/04
(0)
Not too sure if it is a standard product anymore.
-
Jeff Lessard
17:11:18 06/16/04
(4)
why not the Dowdy Choke?
-
keto
17:44:47 06/16/04
(3)
we make more chokes than carter does liver pills.....
-
MQracing
18:13:27 06/16/04
(2)
Re: we make more chokes than carter does liver pills.....
-
DJL
19:32:39 06/16/04
(1)
thanks..... it's on the endangered species list....
-
MQracing
19:43:48 06/16/04
(0)
Re: Iron fist, velvet glove?
-
Doc B.
09:57:22 06/16/04
(
5
)
Dang it, Doc ...
-
Paul Joppa
16:16:55 06/16/04
(
4
)
a comment about the EXO-173
-
keto
17:33:41 06/17/04
(1)
1+1:1 driver stage?
-
keto
06:28:42 06/18/04
(0)
OK
-
Doc B.
16:48:27 06/16/04
(1)
you must have been reading my mind....
-
MQracing
19:35:52 06/16/04
(0)
Re: Iron fist, velvet glove?
-
Jeff Lessard
09:49:43 06/16/04
(0)
PING: Jeff L and Bas
-
mqracing
03:31:21 06/15/04
(
3
)
Yiiiha..thanks Mike.
-
Bas Horneman
13:17:43 06/15/04
(2)
A natural gait with a supurb sense of timing...
-
Bas Horneman
12:47:46 06/21/04
(1)
Or should I say chokes...nt
-
Bas Horneman
13:24:49 06/21/04
(0)
Peerless S-217-D repro?
- Ed Anderson
19:23:00 06/12/04
(
3
)
Re: Peerless S-217-D repro?
-
MQracing
19:59:33 06/12/04
(2)
Re: Peerless S-217-D repro?
-
cjenrick
19:06:14 06/15/04
(1)
L7 (nt)
-
MQracing
21:03:02 06/15/04
(0)
need some tube candidates
-
MQracing
06:02:22 06/12/04
(
6
)
AV8, AV20, 112A, LP2, 3A/110 (nt)
-
Jim Dowdy
11:08:49 06/12/04
(0)
Re: need some tube candidates
-
Sector-7G
10:22:04 06/12/04
(0)
Re: need some tube candidates
-
G
08:43:38 06/12/04
(0)
Re: need some tube candidates
-
G
08:41:33 06/12/04
(0)
Re: need some tube candidates
-
AnandR
08:04:59 06/12/04
(1)
no pix received
-
MQracing
08:58:19 06/12/04
(0)
SPECIAL plate choke... very limited availability
-
mqracing
18:25:34 06/11/04
(
20
)
you have mail
-
berlin
06:28:57 06/14/04
(1)
got'em and thank-you. (nt)
-
MQracing
08:12:31 06/14/04
(0)
Re: SPECIAL plate choke... very limited availability
-
SETA45
03:03:45 06/12/04
(1)
got it... and thanks {nt}
-
MQracing
06:14:54 06/12/04
(0)
125H and 60mA
-
Doc B.
21:52:43 06/11/04
(
15
)
speakin' of the 211....
-
MQracing
05:55:05 06/12/04
(
14
)
tales of madness
-
Jim Dowdy
08:32:50 06/12/04
(
13
)
a 10k primary 15-20 W jobber
-
MQracing
19:47:35 06/12/04
(1)
that would be so cool!!!
-
Jim Dowdy
11:23:37 06/13/04
(0)
845:845 monstro madness by Randy Carter
-
MQracing
08:55:46 06/12/04
(
10
)
Itching to add an RC to ground.
-
VoltSecond
22:18:41 06/12/04
(0)
that can't be all that heavy...
-
Sector-7G
16:32:35 06/12/04
(
8
)
Yeah, yeah...
-
pRC
10:35:06 06/21/04
(
6
)
Yeah, yeah...
-
Sector-7G
19:26:27 06/21/04
(
5
)
...but do they look like this?
-
pRC
07:22:14 06/22/04
(2)
Is the cute little tube on the PS...
-
Jim Dowdy
14:19:06 06/22/04
(1)
Yup, it's an octal Amperite delay relay
-
pRC
04:57:00 06/23/04
(0)
Nah...
-
Jim Dowdy
22:18:52 06/21/04
(1)
One question...
-
subwatt
18:42:18 06/22/04
(0)
Yeah - when Randy complains...
-
Jim Dowdy
13:20:33 06/13/04
(0)
BDT amp revisited - don't need 40k any more!
-
John Swenson
17:30:14 06/09/04
(1)
Re: BDT amp revisited - don't need 40k any more!
-
MQracing
19:04:26 06/11/04
(0)
6V6 Parafeed with "Robin Hood" iron.
-
G
04:51:43 06/08/04
(26)
Re: 6V6 Parafeed with "Robin Hood" iron.
-
eelind
00:19:06 08/28/04
(0)
Re: 6V6 Parafeed with "Robin Hood" iron.
-
eelind
02:14:50 06/14/04
(2)
Re: 6V6 Parafeed with "Robin Hood" iron.
-
G
20:00:41 06/23/04
(1)
Re: 6V6 Parafeed with "Robin Hood" iron.
-
eelind
22:51:05 06/23/04
(0)
Re: 6V6 Parafeed with "Robin Hood" iron.
-
G
09:04:08 06/08/04
(
8
)
Re: 6V6 Parafeed with "Robin Hood" iron.
-
eelind
09:36:33 06/08/04
(
7
)
Re: 6V6 Parafeed with "Robin Hood" iron.
-
G
14:03:27 06/08/04
(
6
)
OK
-
eelind
22:08:52 06/08/04
(
5
)
Re: OK
-
G
04:07:15 06/09/04
(0)
Re: OK
-
G
03:41:14 06/09/04
(
3
)
Re: OK
-
eelind
06:25:25 06/09/04
(2)
Re: OK
-
G
15:28:32 06/09/04
(1)
Re: OK
-
eelind
00:26:07 06/10/04
(0)
Re: 6V6 Parafeed with "Robin Hood" iron.
-
eelind
08:28:15 06/08/04
(2)
Re: 6V6 Parafeed with "Robin Hood" iron.
-
G
08:56:58 06/08/04
(1)
Re: 6V6 Parafeed with "Robin Hood" iron.
-
eelind
09:31:48 06/08/04
(0)
suggestion....
-
Sector-7G
08:13:07 06/08/04
(
3
)
Re: suggestion....
-
G
08:50:54 06/08/04
(2)
Re: suggestion....
-
Sector-7G
09:12:32 06/08/04
(1)
Re: suggestion....
-
G
12:19:30 06/08/04
(0)
OOoooo I like it...lots of iron...!!!! (nt)
-
Bas Horneman
07:42:33 06/08/04
(0)
6V6 Parafeed PSU
-
G
06:05:57 06/08/04
(
4
)
Re: 6V6 Parafeed PSU
-
Jeff Lessard
12:43:50 06/08/04
(1)
Re: 6V6 Parafeed PSU
-
G
14:04:54 06/08/04
(0)
Re: 6V6 Parafeed PSU
-
AnandR
11:41:54 06/08/04
(1)
Re: 6V6 Parafeed PSU
-
G
12:24:38 06/08/04
(0)
Suggestions for versatility in an OPT
-
Russ57
11:14:05 06/07/04
(
4
)
Re: Suggestions for versatility in an OPT
-
MQracing
16:47:34 06/07/04
(
3
)
Thanks and where can I find your push-pull OPT offerings?(nt)
-
Russ57
07:56:43 06/08/04
(2)
Re: Thanks and where can I find your push-pull OPT offerings?(nt)
-
MQracing
20:02:23 06/08/04
(0)
MQ site ) distributors ) Bottlehead
-
Paul Joppa
10:04:52 06/08/04
(0)
Expert: 6C45 operating point deviation!
- James Niel
03:03:09 06/07/04
(7)
Re: Expert: 6C45 operating point deviation!
- Kuei Yang Wang
02:28:53 06/08/04
(2)
Re: Expert: 6C45 operating point deviation!
-
AnandR
07:36:31 06/08/04
(1)
Re: Expert: 6C45 operating point deviation!
- Kuei Yang Wang
12:35:20 06/08/04
(0)
Re: Expert: 6C45 operating point deviation!
- Damir
12:19:51 06/07/04
(0)
Re: Expert: 6C45 operating point deviation!
-
AnandR
07:28:19 06/07/04
(2)
Re: Expert: 6C45 operating point deviation!
- James Neil
20:46:43 06/07/04
(1)
Re: Expert: 6C45 operating point deviation!
-
AnandR
07:31:10 06/08/04
(0)
Interaction between plate loading choke and output transformer?
-
G
09:03:12 06/06/04
(
6
)
Re: Interaction between plate loading choke and output transformer?
-
MQracing
16:29:15 06/07/04
(
5
)
Re: Interaction between plate loading choke and output transformer?
-
G
17:16:15 06/07/04
(
4
)
Re: Interaction between plate loading choke and output transformer?
-
MQracing
17:50:16 06/07/04
(
3
)
Re: Interaction between plate loading choke and output transformer?
-
G
18:42:15 06/07/04
(2)
Re: Interaction between plate loading choke and output transformer?
-
mqracing
19:24:52 06/07/04
(1)
Re: Interaction between plate loading choke and output transformer?
-
G
19:33:14 06/07/04
(0)
Altec 15095 core material - Q for Mike
- single ended
08:53:32 06/05/04
(2)
Re: Altec 15095 core material - Q for Mike
-
mqracing
09:22:58 06/05/04
(1)
Re: Altec 15095 core material - Q for Mike
-
Steve Eddy
21:56:18 06/05/04
(0)
speaking of the 15K:500 cobalt B7...
-
keto
06:40:44 06/04/04
(0)
Unused pair of Cobalt B7 (15K:500) available.
-
Charlie G
19:18:14 06/03/04
(0)
Robin Hood at MagneQuest
-
mqracing
16:21:04 06/03/04
(2)
Re: Robin Hood at MagneQuest
-
mikeyb
13:38:55 06/14/04
(0)
MagneQuest Outputs at $75? I am eager to hear them!
-
mobile homeless
08:47:52 06/06/04
(0)
EXO-99 ?
-
Eli Duttman
17:58:05 06/02/04
(4)
Re: EXO-99 ?
-
Gordon Rankin
13:05:49 06/03/04
(2)
Re: EXO-99 ?
-
Eli Duttman
20:17:45 06/03/04
(1)
LT1185 is great though adjustable but that might be better!
-
Gordon Rankin
08:13:54 06/04/04
(0)
Re: EXO-99 ?
-
MQracing
20:43:23 06/02/04
(0)
grid chokes, again (ping...MQ)
-
keto
08:04:31 06/02/04
(2)
Re: grid chokes, again (ping...MQ)
-
Sector-7G
05:41:21 06/03/04
(1)
that makes sense, even to me...
-
keto
21:32:49 06/03/04
(0)
A question for VS
-
MQracing
20:28:19 06/01/04
(
3
)
Re: A question for VS
-
Paul Joppa
09:48:18 06/02/04
(2)
found it....
-
mqracing
22:59:19 06/05/04
(0)
thanks
-
MQracing
10:15:15 06/02/04
(0)
Mike...whats your email address?
-
Peter Breuninger
18:47:06 06/01/04
(1)
Re: Mike...whats your email address?
-
MQracing
20:07:47 06/01/04
(0)
An unanswered Compact question
-
Scholl
17:20:51 06/01/04
(0)
WE 310, Are you still interested?
-
Ejam
19:44:08 05/31/04
(
3
)
private email sent {{no text}}
-
MQracing
20:09:00 06/01/04
(2)
Re: private email sent {{no text}}
-
Ejam
05:07:33 06/03/04
(1)
Ping: Ejam
-
MQracing
16:04:08 06/03/04
(0)
For Mike: Teflon enameled magnet wire
-
Tom Clearwater
21:21:26 05/30/04
(2)
Re: For Mike: Teflon enameled magnet wire
-
MQracing
20:13:35 06/01/04
(1)
Teflon enameled magnet wire
-
Tom Clearwater
21:32:46 06/01/04
(0)
Happy Holliday weekend to everyone
-
MQracing
04:36:03 05/29/04
(3)
Holiday!?
-
Steve Eddy
13:12:02 05/29/04
(2)
the important one!
-
Sector-7G
16:10:27 05/30/04
(1)
Oh!
-
Steve Eddy
21:14:12 05/30/04
(0)
Dynaco MkIII up grade
-
Uncle Clyde
16:53:07 05/28/04
(2)
Re: Dynaco MkIII up grade
- John Chleapas
15:16:52 05/30/04
(1)
Re: Dynaco MkIII up grade
-
Uncle Clyde
17:08:36 05/30/04
(0)
Peerless Exciting Current Test
-
mqracing
15:16:50 05/26/04
(2)
Oh da good old days when folks actually....
-
Russ57
15:41:26 05/27/04
(1)
Re: Oh da good old days when folks actually....
-
G
09:44:28 11/12/04
(0)
cobalt inventory... the last of the great blue
-
mqracing
06:18:36 05/26/04
(2)
What would be a good matched tube for B14 PP 12000?
-
Tanker
19:42:44 05/26/04
(1)
Re: What would be a good matched tube for B14 PP 12000?
-
MQracing
20:14:34 05/26/04
(0)
volt-sec weights in on the ultra-compact
-
MQracing
17:18:11 05/24/04
(1)
Re: volt-sec weights in on the ultra-compact
-
keto
21:28:02 05/25/04
(0)
Color code for the secondary taps of a TFA 204?
-
G
22:18:52 05/23/04
(3)
Re: Color code for the secondary taps of a TFA 204?
-
MQracing
03:51:37 05/24/04
(2)
Re: Color code for the secondary taps of a TFA 204?
-
G
10:09:03 05/24/04
(1)
Re: Color code for the secondary taps of a TFA 204?
-
G
17:19:47 05/24/04
(0)
Magnequest OPT for EL84 in SE amp
-
Dmitry
18:50:47 05/23/04
(1)
Haven't tried it but ...
-
Paul Joppa
09:02:28 05/24/04
(0)
if you haven't already done so....
-
mqracing
09:05:09 05/23/04
(0)
Plate load choke needed
-
AstroSonic
14:16:24 05/22/04
(1)
Re: Plate load choke needed
-
mqracing
08:59:15 05/23/04
(0)
A Compact CCS Ver 1.
-
VoltSecond
14:02:14 05/22/04
(
16
)
Hi Paul,
-
Bas Horneman
14:46:13 05/23/04
(
15
)
I'm not ruling out the Supertex DNxxxx FETs
-
VoltSecond
22:42:58 05/23/04
(
14
)
Can you comment on the IRF710?
-
Russ57
09:23:25 05/26/04
(
6
)
Re: Can you comment on the IRF710?
-
VoltSecond
21:11:54 05/26/04
(
5
)
Cathode load
-
Russ57
12:17:41 05/27/04
(
4
)
Re: Cathode load
-
VoltSecond
21:53:32 05/27/04
(
3
)
noise...
-
Sector-7G
17:35:42 05/31/04
(0)
Re: Cathode load
-
VoltSecond
22:28:55 05/27/04
(1)
Thanks(nt)
-
Russ57
04:31:25 05/28/04
(0)
CCS issue
-
direct
22:39:14 05/24/04
(
6
)
Caution: 431's can be fussy parts.
-
VoltSecond
23:11:19 05/24/04
(
5
)
CCS issue
-
direct
19:02:24 05/31/04
(0)
Ain't that the truth!
-
Paul Joppa
22:26:37 05/27/04
(
3
)
Re: Like so Mike? Parafeed compact 2A3
-
direct
19:19:17 05/31/04
(0)
CCS issue
-
direct
19:19:17 05/31/04
(0)
I've considered a dual loop design.
-
VoltSecond
23:21:19 05/29/04
(0)
? about grid chokes
-
keto
17:43:39 05/19/04
(2)
Re: ? about grid chokes
-
MQracing
07:46:56 05/22/04
(1)
grid choke input
-
keto
08:50:26 05/22/04
(0)
question re: the RH series....
-
artsybrute
09:03:59 05/19/04
(1)
Re: question re: the RH series....
-
MQracing
07:49:38 05/22/04
(0)
EXO-173 Questions
-
MikeT
07:35:24 05/19/04
(
15
)
Mikey: Still Need Guidance on PPS
-
MikeT
06:28:38 05/23/04
(
10
)
Re: Mikey: Still Need Guidance on PPS
-
MQracing
08:33:06 05/23/04
(
9
)
You Nailed It, I Need a Bit More Info...
-
MikeT
09:14:55 05/23/04
(
8
)
There's *PLENTY* better than Pat's...
-
Sector-7G
11:37:24 05/23/04
(
7
)
Off Topic: There's *PLENTY* better than Pat's... PURE HERESY
-
MQracing
12:03:36 05/23/04
(
6
)
Cheeze wiz...you must be crazy!!!
-
Scholl
17:11:33 06/01/04
(1)
Testify!!!!!
-
Sector-7G
03:38:23 06/04/04
(0)
Sorry About the Controversy......
-
MikeT
12:52:32 05/23/04
(
3
)
thanks MikeT....
-
Sector-7G
14:03:31 05/23/04
(2)
I hope you guys caught all the smileys and stuff....
-
MQracing
18:42:36 05/23/04
(1)
oh-oh!!!
-
Sector-7G
04:55:08 05/24/04
(0)
Re: EXO-173 Questions
-
Bas Horneman
10:41:12 05/19/04
(
3
)
What does the PPS stand for? (nt)
-
Bas Horneman
10:42:03 05/19/04
(2)
Perfected Phase Splitter.
-
Jeff Lessard
12:29:19 05/19/04
(1)
Thanks Jeff..............................................................nt.
-
Bas Horneman
13:34:13 05/19/04
(0)
My parafeed 300B prototype and questions
-
Tanker
21:05:30 05/17/04
(12)
Re: My parafeed 300B prototype and questions
- dead_SHORT
00:13:18 05/24/04
(2)
Hi David, are there any a reason behind using
-
Tanker
20:37:52 05/25/04
(1)
Re: Hi David, are there any a reason behind using
- dead_short
20:46:58 05/26/04
(0)
Re: My parafeed 300B prototype and questions
-
Paul Joppa
23:01:36 05/19/04
(
4
)
What Type of Cap for Parafeed?
-
MikeT
06:25:40 05/23/04
(2)
Re: What Type of Cap for Parafeed?
-
Paul Joppa
11:51:24 05/23/04
(1)
Thanks For The Info (nt)
-
MikeT
07:55:48 05/24/04
(0)
Paul! is the 1mV ripple mentioned regarding to at the 300B plate or
-
Tanker
05:12:14 05/20/04
(0)
Re: My parafeed 300B prototype and questions
-
keto
18:55:50 05/19/04
(1)
Keto, parallel caps will add the capacitance, but voltage will
-
Tanker
05:07:06 05/20/04
(0)
Where are all expert on Parafeed? Comment and opinion please
-
Tanker
18:11:14 05/19/04
(0)
Re: Like so Mike? Parafeed compact 2A3
-
direct
17:27:31 05/18/04
(0)
push pull series
-
mikeyb
11:00:38 05/17/04
(
4
)
Re: push pull series
-
MQracing
12:51:32 05/17/04
(
3
)
Re: push pull series
-
mikeyb
20:08:31 05/17/04
(0)
You are always welcome to mail em to me
-
Bas Horneman
14:08:22 05/17/04
(0)
Re: push pull series
-
Bob_C
14:00:06 05/17/04
(0)
Like so Mike? Parafeed compact 2A3
-
Bas Horneman
07:25:01 05/16/04
(33)
How About Another Variation?
-
MikeT
05:01:41 05/19/04
(0)
I believe the 420 ohm should go to ground.
-
VoltSecond
23:46:54 05/18/04
(1)
Should it?
-
Bas Horneman
01:01:06 05/19/04
(0)
Re: Like so Mike? Parafeed compact 2A3
-
direct
14:06:02 05/16/04
(0)
Re: Like so Mike? Parafeed compact 2A3
- Kuei Yang Wang
10:27:12 05/16/04
(
6
)
I have some 5842's and 6c45...but am afraid
-
Bas Horneman
13:28:42 05/16/04
(1)
Re: I have some 5842's and 6c45...but am afraid
-
keto
17:17:20 05/16/04
(0)
Re: Like so Mike? Parafeed compact 2A3
-
mqracing
13:05:25 05/16/04
(
3
)
"three magic building blocks"
-
keto
20:14:21 05/18/04
(2)
Re: "three magic building blocks"
-
pistoljoe
05:02:38 05/19/04
(1)
the Harry F. Olson book...
-
keto
17:07:49 05/19/04
(0)
Re: Like so Mike? Parafeed compact 2A3
-
mqracing
10:16:43 05/16/04
(21)
No need for speed...take your time Mike
-
Bas Horneman
16:35:54 05/16/04
(0)
Will the Robin Hood PF transformer with Nickel be suitable
-
Bas Horneman
14:22:28 05/16/04
(2)
Re: Will the Robin Hood PF transformer with Nickel be suitable
-
MQracing
15:42:32 05/16/04
(1)
O yes ofcourse the RH series is SE..(nt)
-
Bas Horneman
16:18:15 05/16/04
(0)
Parafeed 2
-
Bas Horneman
13:49:34 05/16/04
(16)
Way Too Much Iron on that Chassis
-
Ejam
17:05:42 05/17/04
(13)
Re: Way Too Much Iron on that Chassis
-
Sector-7G
05:47:35 05/21/04
(2)
make that 8 pcs. Forgot the bias TX...
-
Sector-7G
17:48:32 05/21/04
(1)
Re: make that 8 pcs. Forgot the bias TX...
-
fatbottle
05:14:32 05/22/04
(0)
It can be done.
-
Jeff Lessard
19:25:59 05/17/04
(0)
Way Too Much Iron on that Chassis
-
mqracing
17:30:31 05/17/04
(
8
)
Mikey If We Are Talking Concepts...
-
Ejam
00:38:02 05/18/04
(
7
)
Like this?
-
Bas Horneman
10:45:26 05/18/04
(
6
)
Perfect Bas
-
Ejam
17:12:26 05/18/04
(1)
You are welcome...
-
Bas Horneman
02:57:56 05/19/04
(0)
Very Nice
-
MQracing
13:39:31 05/18/04
(
3
)
Re: Very Nice
-
Bas Horneman
15:11:53 05/18/04
(2)
how much are the svet 310's?
-
MQracing
09:32:09 05/22/04
(1)
Around 45$
-
Bas Horneman
01:05:31 05/24/04
(0)
Hey!!!
-
Jeff Lessard
18:49:03 05/16/04
(0)
PS..I'll love the schematic drawing...and seeing responses...
-
Bas Horneman
13:51:35 05/16/04
(0)
introducing the ultra compact club
-
Yeo
01:33:08 05/16/04
(
4
)
Yo Yeo...
-
Bas Horneman
07:27:08 05/16/04
(
3
)
Re: Yo Yeo...
-
Yeo
07:54:39 05/16/04
(2)
This is what it looks like as I posted
-
Bas Horneman
08:59:10 05/16/04
(1)
So unfortunately no report on the sound yet!!
-
Bas Horneman
09:00:02 05/16/04
(0)
27-PP2A3-S245 (pic)
-
keto
08:10:11 05/15/04
(2)
27-PP45
-
keto
21:11:42 05/17/04
(1)
update...
-
keto
19:11:46 05/29/04
(0)
MQ introduces a new limited series of output tranneys
-
MQracing
08:31:51 05/14/04
(
17
)
OOOHHH!
-
badman
23:09:45 05/15/04
(1)
RH core mats....
-
MQracing
10:21:02 05/16/04
(0)
Re: MQ introduces a new limited series of output tranneys
-
Kyle K
10:48:45 05/15/04
(
5
)
let's work it out and see....
-
mqracing
11:45:11 05/15/04
(
4
)
Treble problem though?....
-
Paul Joppa
10:13:40 05/16/04
(2)
perhaps... and you make a good point....
-
mqracing
12:42:09 05/16/04
(1)
Re: perhaps... and you make a good point....
-
Kyle K
12:47:43 05/18/04
(0)
Thanks, Mike! (nt)
-
Kyle K
11:56:06 05/15/04
(0)
How do you use the UL tap on parellel feed?
- Braubeat
07:56:51 05/15/04
(
3
)
Try it and find out?
-
Paul Joppa
09:56:12 05/16/04
(0)
UL tap on parellel feed?
-
Sector-7G
07:45:25 05/16/04
(0)
Re: How do you use the UL tap on parellel feed?
-
MQracing
18:56:44 05/15/04
(0)
Re: SE/UL 6V6 or 6BQ5?
-
AstroSonic
17:19:49 05/14/04
(2)
Mmmm ... 6BQ5 U/L
-
Paul Joppa
10:19:53 05/15/04
(0)
that's exactly what I had in mind :=)
-
mqracing
18:15:37 05/14/04
(0)
Some addtional electrical and mehanical specs for Robin Hood series
-
mqracing
08:49:07 05/14/04
(1)
So you can have your CAKE and eat it...
-
Bas Horneman
09:02:10 05/14/04
(0)
Re: Question about parafeed model
-
Matts
08:14:57 05/14/04
(2)
Re: Question about parafeed model
-
MQracing
08:35:21 05/14/04
(1)
Re: Thanks- might be time to build some 45s... nt
-
Matts
21:12:16 05/14/04
(0)
What's the DCR of the BCP-16NI GC? (nt)
-
JLH
05:02:15 05/14/04
(1)
approx 4000 ohms (nt)
-
MQracing
05:49:11 05/14/04
(0)
? for MSL about PP "iron" for 12 W. pentodes.
-
Eli Duttman
15:39:55 05/13/04
(2)
Re: ? for MSL about PP "iron" for 12 W. pentodes.
-
mqracing
18:32:12 05/14/04
(1)
Re: ? for MSL about PP "iron" for 12 W. pentodes.
-
Eli Duttman
00:46:35 05/15/04
(0)
Criticism please!!
-
Bas Horneman
13:35:33 05/13/04
(
22
)
Re: Criticism please!!
-
Dave Davenport
13:38:29 05/14/04
(0)
14-05-2004 version
-
Bas Horneman
11:25:42 05/14/04
(
3
)
Re: 14-05-2004 version
-
keto
15:02:46 05/14/04
(2)
Version I will start collecting parts for......
-
Bas Horneman
07:11:36 05/15/04
(1)
parafeed the output stage?
-
MQracing
19:41:07 05/15/04
(0)
Updated version..give it your best shot!!!
-
Bas Horneman
17:14:18 05/13/04
(
9
)
Re: Updated version..give it your best shot!!!
-
AnandR
05:28:48 05/14/04
(2)
Re: Updated version..give it your best shot!!!
-
Bas Horneman
06:47:24 05/14/04
(1)
Re: Updated version..give it your best shot!!!
-
AnandR
20:48:39 05/14/04
(0)
Cool!
-
pistoljoe
04:38:31 05/14/04
(2)
Hey Joe!
-
Bas Horneman
04:55:52 05/14/04
(1)
Re: Hey Joe!
-
Eli Duttman
11:38:35 05/14/04
(0)
Re: Updated version..give it your best shot!!!
- Kuei Yang Wang
03:20:44 05/14/04
(1)
Thanks KYW San..
-
Bas Horneman
04:43:14 05/14/04
(0)
Re: Updated version..give it your best shot!!!
-
Eli Duttman
20:15:35 05/13/04
(0)
Re: Criticism please!!
-
Eli Duttman
15:19:07 05/13/04
(2)
I was planning hum balance pots...
-
Bas Horneman
16:46:04 05/13/04
(1)
Re: I was planning hum balance pots...
-
Eli Duttman
20:03:58 05/13/04
(0)
general loud applause....
-
keto
15:06:18 05/13/04
(
3
)
The 100k is going !! ;-)
-
Bas Horneman
16:57:17 05/13/04
(2)
Re: The 100k is going !! ;-)
-
keto
08:32:45 05/14/04
(1)
Re: The 100k is going !! ;-)
-
Bas Horneman
08:58:59 05/14/04
(0)
ST 50's pair
-
Gordon Rankin
08:53:19 05/13/04
(0)
Magnetics
-
Steve Eddy
22:48:07 05/12/04
(
3
)
Re: Magnetics
-
MQracing
06:31:07 05/14/04
(1)
Re: Magnetics
-
Steve Eddy
08:57:03 05/14/04
(0)
Re: Magnetics
-
Gordon Rankin
10:36:00 05/13/04
(0)
Any MQ transformers for MC Stepup Apps?
-
tommytube
17:58:34 05/11/04
(
4
)
Re: Any MQ transformers for MC Stepup Apps?
-
MQracing
18:11:52 05/11/04
(
3
)
Re: Any MQ transformers for MC Stepup Apps?
-
tommytube
20:03:09 05/11/04
(2)
Re: Any MQ transformers for MC Stepup Apps?
-
Peter Qvortrup
01:01:28 06/22/04
(0)
Re: Any MQ transformers for MC Stepup Apps?
-
Bob_C
08:34:15 05/12/04
(0)
RIT 5
-
Mr. Lowther
07:28:50 05/11/04
(2)
Re: RIT 5
-
Jim D.
09:32:01 06/03/04
(0)
It should be fine :=) {nt}
-
MQracing
11:14:43 05/11/04
(0)
Nice forum ! Congrats Mike ! (nt)
-
dominique
08:22:56 05/09/04
(0)
compact Dowdy/6SN7 direct-coupled to PP2A3
-
keto
19:46:26 05/08/04
(1)
another 6SN7 variant
-
keto
14:18:43 05/11/04
(0)
Problem: TL-404 & Selector switch
-
AnandR
14:25:16 05/08/04
(
4
)
Re: Problem: TL-404 & Selector switch
-
Doc B.
11:18:57 05/10/04
(
3
)
Re: Problem: TL-404 & Selector switch
-
AnandR
13:40:27 05/10/04
(2)
Re: Problem: TL-404 & Selector switch
-
Doc B.
16:37:03 05/10/04
(1)
Re: Problem: TL-404 & Selector switch
-
AnandR
06:46:21 05/11/04
(0)
EXO-173 progress
-
keto
10:30:39 05/08/04
(
5
)
Re: EXO-173 progress
-
Sector-7G
19:05:27 05/10/04
(
4
)
Re: EXO-173 progress
-
keto
15:53:44 05/11/04
(
3
)
progress
-
Sector-7G
17:17:47 05/11/04
(2)
yet another comment on filament windings
-
keto
22:16:05 05/15/04
(1)
it's just a sack of bits now
-
Sector-7G
03:49:15 05/16/04
(0)
links
-
rodneyAB
19:27:34 05/07/04
(
5
)
yup
-
Doc B.
20:24:08 05/07/04
(
4
)
and I concur 100%
-
mqracing
21:05:03 05/07/04
(
3
)
A good start ...
-
Paul Joppa
15:29:39 05/10/04
(2)
thank-you....
-
MQracing
18:10:58 05/10/04
(1)
Site Links Updated...Jeff is reeling....
-
mobile homeless
22:34:57 05/10/04
(0)
Quick choke question for ya MSL
-
Russ57
12:49:35 05/07/04
(
8
)
Choke me in the shallow water. . .
-
VoltSecond
00:45:30 05/08/04
(
5
)
two thumbs UUUUP! from me, thanks for taking the time...
-
Sector-7G
03:09:53 05/08/04
(
4
)
You're welcome.
-
VoltSecond
11:32:01 05/08/04
(1)
Re: You're welcome.
-
fred76
11:51:19 05/08/04
(0)
You think....
-
Russ57
07:11:08 05/08/04
(1)
I think....
-
Sector-7G
18:46:57 05/08/04
(0)
Re: Quick choke question for ya MSL
-
Bob_C
18:48:34 05/07/04
(1)
Re: Quick choke question for ya MSL
-
Paul Joppa
19:05:34 05/07/04
(0)
Geez!!!
-
Jeff Lessard
11:38:43 05/07/04
(0)
TFA-204 suggestions
- Pete B.
08:28:27 05/07/04
(
7
)
Re: TFA-204 suggestions
-
mqracing
20:52:06 05/07/04
(1)
Re: TFA-204 suggestions
- Pete B.
11:27:17 05/11/04
(0)
Re: TFA-204 suggestions
-
Doc B.
08:51:00 05/07/04
(
4
)
your potato's got spuds....
-
MQracing
10:59:44 05/07/04
(
3
)
OTH...the 6c45 would be1 of the hardest tube to parallel!
-
Bas Horneman
13:30:53 05/07/04
(2)
So? ;^))
-
Doc B.
20:22:08 05/07/04
(1)
Yea...but you are REAL good Doc! ;-)
-
Bas Horneman
00:46:38 05/11/04
(0)
Eager for more details of Jean-Francois Lessard's Pantheon 2A3 PP amps!
-
soulcargo
07:20:57 05/07/04
(
12
)
Low power PP OPT
-
John Swenson
18:37:05 05/07/04
(
5
)
can you provide more info, please?
-
mqracing
06:36:17 05/08/04
(
3
)
Re: can you provide more info, please?
-
John Swenson
14:35:30 05/10/04
(2)
Re: can you provide more info, please?
-
Paul Joppa
22:04:45 05/13/04
(0)
forty K and counting....
-
MQracing
05:34:06 05/11/04
(0)
Re: Low power PP OPT
-
Bob_C
18:51:27 05/07/04
(0)
Re: Eager for more details of Jean-Francois Lessard's Pantheon 2A3 PP amps!
-
Jeff Lessard
11:33:07 05/07/04
(
4
)
Re: Eager for more details of Jean-Francois Lessard's Pantheon 2A3 PP amps!
-
Sector-7G
16:52:15 05/07/04
(0)
Re: Eager for more details of Jean-Francois Lessard's Pantheon 2A3 PP amps!
-
fred76
11:52:12 05/07/04
(2)
Re: Eager for more details of Jean-Francois Lessard's Pantheon 2A3 PP amps!
-
Jeff Lessard
12:03:24 05/07/04
(1)
Re: Eager for more details of Jean-Francois Lessard's Pantheon 2A3 PP amps!
-
fred76
00:09:25 05/08/04
(0)
Yep..so am I...just ordered the EXO-173!
-
Bas Horneman
07:50:08 05/07/04
(0)
Mike (IronMan) this is Tony (novi)..C O N G R A T S !!!
-
NuTube
03:47:01 05/07/04
(1)
Is this Tony Ho?
-
mqracing
07:08:34 05/08/04
(0)
Thanks for the MQ forum, Mike!
-
keto
22:58:53 05/06/04
(0)
Congratulations! You spend enough time here - you need your own place _grin_
-
Triodeuser
19:32:17 05/06/04
(0)
Way to go Mike!
-
pistoljoe
18:38:06 05/06/04
(2)
we'll need to appoint a resident horologist.....
-
MQracing
20:22:39 05/06/04
(1)
that too
-
pistoljoe
07:26:21 05/07/04
(0)
Waaay Cool Mikey, Congrats!!
- Eileen
16:10:57 05/06/04
(2)
kisses and hugs to the greatest Queen bee of them all....
-
mqracing
20:08:56 05/06/04
(1)
Re: kisses and hugs to the greatest Queen bee of them all....
- Eileen
20:36:54 05/07/04
(0)
Thanks for the additional BandWidth MSL
-
Sector-7G
15:49:37 05/06/04
(
4
)
your wish is our command (well... maybee sometimes :=)
-
mqracing
20:14:56 05/06/04
(2)
Re: your wish is our command ....Great!!!
-
Sector-7G
17:03:15 05/12/04
(0)
COBALT blue
-
rodneyAB
00:18:42 05/07/04
(0)
Huzzah!
-
John Bennitt
16:36:51 05/06/04
(0)
Cool Idea!!
-
Matts
15:07:18 05/06/04
(0)
Welcome to the MagneQuest forum.
-
mqracing
22:55:36 05/05/04
(
3
)
Hey Mikey-
-
Doc B.
15:11:14 05/06/04
(2)
Re: Hey Mikey-
-
Bob_C
17:01:14 05/06/04
(0)
Single Malts
-
KGW
15:53:59 05/06/04
(0)
Previous Page
[
MagneQuest Home
] [
Audio Asylum
]
You can not post to an archived thread.