High Efficiency Speaker Asylum

Need speakers that can rock with just one watt? You found da place.

For Sale Ads

FAQ / News / Events

Specialty Groups: SET Asylum

AudioAsylum Trader

REL Strata III - Purchased in 2001, and had a new amplifier section...

Ribbon Super Tweeters built by James Strasser - One pair of Ribbon Super Tweeters, made by speaker...

Frazier Dixielanders - Iain42 14:58:28 12/09/16 (9)
- RE: Frazier Dixielanders - merdy 15:56:12 12/10/16 (1)
  - RE: Frazier Dixielanders - Iain42 17:24:05 12/10/16 (0)
- RE: Frazier Dixielanders - Bill Fitzmaurice 19:11:08 12/09/16 (6)
  - RE: Frazier Dixielanders - Iain42 20:37:02 12/09/16 (5)
    - RE: Frazier Dixielanders - freddyi 20:55:59 12/09/16 (4)
      - RE: Frazier Dixielanders - DIY John 03:06:47 12/10/16 (3)
        
        RE: Frazier Dixielanders - Iain42 11:49:23 12/10/16 (2)
        
        RE: Frazier Dixielanders - DIY John 05:24:58 12/11/16 (1)
        
        RE: Frazier Dixielanders - Iain42 07:54:44 12/11/16 (0)
Lowther PM6C in Karlson 12 - wclarson12 14:33:14 12/03/16 (6)
- RE: Lowther PM6C in Karlson 12 - freddyi 19:31:29 12/05/16 (5)
  - RE: Lowther PM6C in Karlson 12 - wclarson12 20:12:38 12/05/16 (4)
    - RE: Lowther PM6C in Karlson 12 - freddyi 01:28:38 12/06/16 (3)
      - RE: Lowther PM6C in Karlson 12 - wclarson12 11:36:17 12/06/16 (2)
        
        RE: Lowther PM6C in Karlson 12 - freddyi 19:35:58 12/06/16 (1)
        
        RE: Lowther PM6C in Karlson 12 - moray james 11:33:02 12/11/16 (0)
Field coil dummy... - dee eye why 10:35:38 12/03/16 (8)
- RE: Field coil dummy... - Alpha Al 12:43:47 12/05/16 (6)
  - RE: Field coil dummy... - BofService 13:27:48 12/05/16 (5)
    - RE:field coils can create a stronger magnetic field - Bill Fitzmaurice 11:29:01 12/07/16 (0)
    - Neodymium based speaker magnets are quite common these days... - Steve O 14:41:44 12/05/16 (3)
      - RE: Neodymium based speaker magnets are quite common these days... - Michael Samra 21:00:30 12/06/16 (2)
        
        Yes, I've heard them... - Steve O 10:32:00 12/07/16 (0)
        
        RE: Neodymium based speaker magnets are quite common these days... - bean 07:50:38 12/07/16 (0)
- RE: Field coil dummy... - Steve O 15:45:33 12/03/16 (0)
Looking to integrate units for midbass system - NoMoreDisasters 17:32:29 12/02/16 (9)
- RE: Looking to integrate units for midbass system - tomservo 09:47:38 12/05/16 (3)
  - RE: Looking to integrate units for midbass system - NoMoreDisasters 19:11:30 12/10/16 (0)
  - RE: Looking to integrate units for midbass system - claudej1@aol.com 09:54:30 12/10/16 (1)
    - RE: Looking to integrate units for midbass system - NoMoreDisasters 17:17:52 12/10/16 (0)
- RE: Looking to integrate units for midbass system - Coner 10:20:24 12/03/16 (3)
  - RE: Looking to integrate units for midbass system - NoMoreDisasters 10:35:01 12/03/16 (2)
    - RE: Looking to integrate units for midbass system - zobsky 09:45:13 12/22/16 (0)
    - RE: Looking to integrate units for midbass system - Coner 16:24:47 12/03/16 (0)
- RE: Looking to integrate units for midbass system - NoMoreDisasters 10:07:49 12/03/16 (0)
Altec user's board - jad 10:31:15 12/02/16 (1)
- RE: Altec user's board - poundingruvz@yahoo.com 23:53:52 12/02/16 (0)
My "New" Beauhorn Virtuoso Speakers! - thetubeguy1954 18:42:25 12/01/16 (8)
- RE: My "New" Beauhorn Virtuoso Speakers! - Inmate51 17:15:27 02/08/17 (0)
- RE: My "New" Beauhorn Virtuoso Speakers! - Retsel 14:31:43 02/08/17 (0)
- RE: My "New" Beauhorn Virtuoso Speakers! - PaulF70 13:09:11 12/25/16 (0)
- RE: My "New" Beauhorn Virtuoso Speakers! - Bill the K 20:21:55 12/01/16 (1)
  - RE: My "New" Beauhorn Virtuoso Speakers! - thetubeguy1954 09:37:15 12/02/16 (0)
- RE: My "New" Beauhorn Virtuoso Speakers! - Jeff Day 19:54:55 12/01/16 (2)
  - RE: My "New" Beauhorn Virtuoso Speakers! - thetubeguy1954 09:49:11 12/02/16 (1)
    - RE: My "New" Beauhorn Virtuoso Speakers! - Jeff Day 04:49:07 12/06/16 (0)
Mixing Speaker Impedances - Cpwill 13:44:04 11/27/16 (7)
- RE: Mixing Speaker Impedances - badman 12:58:30 11/29/16 (0)
- you wouldn't be the first! :-) - mhardy6647 10:11:20 11/29/16 (1)
  - Mark, Have I Shown You - tubav 13:54:17 11/29/16 (0)
- RE: Mixing Speaker Impedances - Bill Fitzmaurice 16:54:14 11/27/16 (2)
  - RE: Mixing Speaker Impedances - Cpwill 05:02:55 11/28/16 (1)
    - RE: Mixing Speaker Impedances - Bill Fitzmaurice 12:40:22 11/28/16 (0)
- It's a good question - Uncle Mike 14:32:32 11/27/16 (0)
Lowther questions - Hildur 11:30:44 11/20/16 (2)
- RE: Lowther questions - Mr. Lowther 12:00:26 11/21/16 (1)
  - RE: Lowther questions - Hildur 12:50:25 11/21/16 (0)
Milwaukee area tech/Rethm speaker repair - PaulF70 18:19:17 11/11/16 (5)
- RE: Milwaukee area tech/Rethm speaker repair - Mr. Lowther 11:16:42 11/16/16 (1)
  - RE: Milwaukee area tech/Rethm speaker repair - PaulF70 11:35:02 11/16/16 (0)
- RE: Milwaukee area tech/Rethm speaker repair - thetubeguy1954 00:56:52 11/16/16 (2)
  - Tom!? - Timbo in Oz 02:28:25 11/22/16 (1)
    - RE: Tom!? - thetubeguy1954 07:59:06 11/24/16 (0)
Altec 605b simple xover - RPMac 06:43:11 11/10/16 (14)
- RE: Altec 605b simple xover - Joe Roberts 09:28:31 11/20/16 (4)
  - RE: Altec 605b simple xover - RPMac 15:48:36 11/21/16 (3)
    - RE: Altec 605b simple xover - Joe Roberts 05:31:54 11/23/16 (2)
      - RE: Altec 605b simple xover - RPMac 07:25:28 11/23/16 (1)
        
        RE: Altec 605b simple xover - Joe Roberts 08:30:17 11/23/16 (0)
- RE: Altec 605b simple xover - DaveV 08:34:24 11/12/16 (3)
  - RE: Altec 605b simple xover - RPMac 20:40:20 11/16/16 (1)
    - RE: Altec 605b simple xover ........simpler is sometimes better .... - drummerwill 19:50:40 11/17/16 (0)
  - and another link - DaveV 08:41:35 11/12/16 (0)
- RE: Altec 605b simple xover - Randal P 07:12:08 11/11/16 (2)
  - RE: Altec 605b simple xover - RPMac 14:07:31 11/11/16 (0)
  - Agree! - amandarae 14:01:17 11/11/16 (0)
- RE: Altec 605b simple xover - freddyi 01:58:55 11/11/16 (0)
- RE: Altec 605b simple xover - DaveV 13:11:23 11/10/16 (0)
Avantgarde Uno Series 2 - Crossover Upgrades? - cawson@onetel.com 03:00:20 11/09/16 (0)
Commonwealth 12 70% BL xmax ~2.5mm (?) - freddyi 15:22:13 11/08/16 (0)
Difference Models of Altec 414 - Randal P 06:00:32 10/30/16 (4)
- RE: Difference Models of Altec 414 - Coner 13:26:05 10/31/16 (3)
  - RE: Difference Models of Altec 414 - Randal P 10:26:54 11/17/16 (2)
    - RE: Difference Models of Altec 414 - fred76 07:59:19 11/18/16 (1)
      - RE: Difference Models of Altec 414 - Randal P 11:11:53 11/18/16 (0)
If using a 511 for mid ~400-3KHz - what horn/WG type for the tweeter ? - freddyi 14:42:37 10/27/16 (15)
- why a 511, freddyi? - mhardy6647 11:22:34 10/28/16 (7)
  - What Horn & Driver? - thetubeguy1954 21:40:21 11/02/16 (2)
    - Community BRH90A and JBL 2441 - mhardy6647 09:14:44 11/03/16 (1)
      - RE: Thanks (nt) - thetubeguy1954 13:07:54 11/09/16 (0)
  - RE: why a 511, freddyi? - freddyi 12:42:53 10/28/16 (3)
    - they sure don't have a good reputation below 800 Hz or so... - mhardy6647 14:25:26 10/28/16 (2)
      - RE: they sure don't have a good reputation below 800 Hz or so... - freddyi 15:27:45 10/28/16 (1)
        
        RE: they sure don't have a good reputation below 800 Hz or so... - Hornlover 08:37:44 10/31/16 (0)
- RE: If using a 511 for mid ~400-3KHz - what horn/WG type for the tweeter ? - Hornlover 08:34:57 10/28/16 (2)
  - RE: If using a 511 for mid ~400-3KHz - what horn/WG type for the tweeter ? - freddyi 15:57:31 10/28/16 (0)
  - "high performance plastic" :-) - mhardy6647 15:11:51 10/28/16 (0)
- RE: If using a 511 for mid ~400-3KHz - what horn/WG type for the tweeter ? - Alpha Al 06:24:17 10/28/16 (3)
  - RE: If using a 511 for mid ~400-3KHz - what horn/WG type for the tweeter ? - freddyi 12:54:27 10/28/16 (0)
  - RE: If using a 511 for mid ~400-3KHz - what horn/WG type for the tweeter ? - Hornlover 08:32:43 10/28/16 (1)
    - RE: If using a 511 for mid ~400-3KHz - what horn/WG type for the tweeter ? - Alpha Al 09:31:37 10/28/16 (0)
just a cap? or 2nd order HP for sealed back mid on short WG ? - freddyi 15:55:38 10/26/16 (0)
Driver recommendation for this horn? - lokie 07:12:31 10/26/16 (8)
- RE: Driver recommendation for this horn? - thump 01:06:08 11/12/16 (1)
  - RE: Driver recommendation for this horn? - thump 01:14:38 11/12/16 (0)
- Is the adjoining aparment for rent? * - Billy Wonka 12:14:22 10/30/16 (0)
- RE: Driver recommendation for this horn? - Bill Fitzmaurice 09:28:04 10/27/16 (0)
- RE: Driver recommendation for this horn? - maxhifi 09:25:45 10/27/16 (2)
  - RE: doc brown - thump 01:09:36 11/12/16 (0)
  - RE: Driver recommendation for this horn? - Randal P 10:25:54 10/27/16 (0)
- RE: Driver recommendation for this horn? - Coner 19:51:56 10/26/16 (0)
Who is building Edgarhorn Slimlines? - hpc 18:05:08 10/25/16 (6)
- RE: Who is building Edgarhorn Slimlines? - Bruce Edgar 10:22:18 10/27/16 (5)
  - Great to hear you are still looking down at the grass, Bruce... - Ivan303 06:40:53 11/09/16 (0)
  - RE: Who is building Edgarhorn Slimlines? - tube wrangler 21:07:17 11/03/16 (1)
    - RE: Who is building Edgarhorn Slimlines? - hottattoo 18:15:27 11/05/16 (0)
  - RE: Best wishes for a speedy recovery! - Paul Eizik 14:51:34 10/28/16 (0)
  - RE: Who is building Edgarhorn Slimlines? - EduardG 09:02:58 10/28/16 (0)
ATTN: Freddyi - thetubeguy1954 15:47:54 10/25/16 (4)
- RE: ATTN: Freddyi - freddyi 16:24:11 10/25/16 (3)
  - RE: ATTN: Freddyi - caffeinator 13:11:15 11/01/16 (0)
  - "only fourteen left" ;-) - mhardy6647 11:54:44 10/28/16 (1)
    - and now only ten ;) - caffeinator 04:58:31 11/01/16 (0)
Bass control with low powered tube amps - tomtom58 07:41:16 10/24/16 (27)
- RE: Bass control with low powered tube amps - KanedaK 01:02:54 11/17/16 (0)
- RE: Bass control with low powered tube amps - krankkall 16:59:04 11/08/16 (0)
- RE: Bass control with low powered tube amps - tube wrangler 21:15:24 11/03/16 (0)
- Enter the self-powered subwoofer....it can work, * - Billy Wonka 12:16:11 10/30/16 (0)
- RE: Bass control with low powered tube amps - bare 10:59:27 10/26/16 (4)
  - RE: What was I thinking? Taking an axe to my amps right now and... - kitch29 20:42:59 10/26/16 (3)
    - TRY! replacing them 'experimentally' :-) - bare 10:35:21 10/28/16 (2)
      - Some notions are deep and difficult to displace" I can see that... - Cleantimestream 00:15:45 10/29/16 (1)
        
        RE: Bedini and Acoustat, my last store boughts - kitch29 05:23:35 10/29/16 (0)
- Stuffing - Duke 13:32:07 10/25/16 (0)
- RE: Bass control with low powered tube amps - SETguy 13:05:52 10/25/16 (0)
- RE: Bass control with low powered tube amps - 6bq5 09:25:12 10/25/16 (0)
- RE: Bass control with low powered tube amps - SETguy 05:03:48 10/25/16 (0)
- IME the room's resonances, spkr positioning, and the speaker's onw Qtc dominate and DF is out of the race - Timbo in Oz 20:14:48 10/24/16 (0)
- RE: Bass control with low powered tube amps - hahax@verizon.net 19:35:55 10/24/16 (0)
- RE: Bass control with low powered tube amps - 91derlust 13:20:36 10/24/16 (0)
- RE: Bass control with low powered tube amps - Grinnell 11:54:31 10/24/16 (0)
- RE: Bass control with low powered tube amps - kitch29 10:25:20 10/24/16 (0)
- Damping isn't an issue - Bill Fitzmaurice 09:24:32 10/24/16 (5)
  - Damping isn't an issue, but damping factor can be - maxhifi 09:15:59 10/25/16 (1)
    - F'whoop, the article is about damping factor. - Timbo in Oz 00:56:10 11/24/16 (0)
  - I knew that, but couldn't lay my hands on the data, thanks. - Timbo in Oz 23:55:59 10/24/16 (0)
  - RE: Damping isn't an issue - hahax@verizon.net 19:23:41 10/24/16 (0)
  - RE: Damping isn't an issue - Tre' 16:02:58 10/24/16 (0)
- RE: Bass control with low powered tube amps - rogerh113 08:00:53 10/24/16 (0)
- RE: Bass control with low powered tube amps - Tre' 07:52:11 10/24/16 (1)
  - RE: Bass control with low powered tube amps - Jim D. 12:47:36 11/02/16 (0)
Voxativ 1.6 - big muck 12:21:06 10/22/16 (0)
any reasonably priced cone drivers when horn loaded will keep up with midbass horns? - freddyi 23:54:43 10/21/16 (5)
- RE: any reasonably priced cone drivers when horn loaded will keep up with midbass horns? - Bill Fitzmaurice 05:14:12 10/22/16 (4)
  - RE: any reasonably priced cone drivers when horn loaded will keep up with midbass horns? - freddyi 13:14:51 10/22/16 (3)
    - RE: any reasonably priced cone drivers when horn loaded will keep up with midbass horns? - Bill Fitzmaurice 14:27:48 10/22/16 (2)
      - RE: any reasonably priced cone drivers when horn loaded will keep up with midbass horns? - freddyi 14:58:04 10/22/16 (1)
        
        RE: any reasonably priced cone drivers when horn loaded will keep up with midbass horns? - Bill Fitzmaurice 15:04:09 10/22/16 (0)
anyone know anything about the JBL N-600 crossovers? - mhardy6647 15:13:48 10/21/16 (1)
- RE: anyone know anything about the JBL N-600 crossovers? - kyle 19:52:00 10/21/16 (0)
Simple passive xxover for Eminence Beta 10 CBMRA ? - freddyi 14:47:34 10/19/16 (2)
- RE: Simple passive xxover for Eminence Beta 10 CBMRA ? - djk 14:04:34 10/21/16 (1)
  - RE: Simple passive xxover for Eminence Beta 10 CBMRA ? - freddyi 23:56:31 10/21/16 (0)
Aer after market recone - Victoriosierra@gmail.com 03:20:50 10/17/16 (2)
- RE: Aer after market recone - GTCharlie 04:32:19 10/19/16 (0)
- RE: Aer after market recone - Alpha Al 14:05:54 10/17/16 (0)
Karlsonized Bass Reflex Port Patent - freddyi 13:47:04 10/16/16 (2)
- RE: Karlsonized Bass Reflex Port Patent - claudej1@aol.com 06:38:31 10/17/16 (1)
  - RE: Karlsonized Bass Reflex Port Patent - freddyi 06:45:57 10/17/16 (0)
La Scala speaker surround durability - Charlie8521 12:09:15 10/13/16 (24)
- Thank you all for your inputs - Charlie8521 16:16:36 10/18/16 (0)
- La Scala was originally designed as a PA speaker - mgbpuff 07:26:54 10/18/16 (2)
  - RE: La Scala was originally designed as a PA speaker - Worthless $ - freddyi 18:53:18 10/19/16 (0)
  - RE: La Scala was originally designed as a PA speaker - mgbpuff 07:28:43 10/18/16 (0)
- First Listen, sign Crossover dead? - Charlie8521 08:34:02 10/16/16 (3)
  - RE: First Listen, sign Crossover dead? - KanedaK 06:50:04 10/18/16 (0)
  - RE: First Listen, sign Crossover dead? - maxhifi 12:20:07 10/16/16 (1)
    - RE: First Listen, sign Crossover dead? - KanedaK 06:51:27 10/18/16 (0)
- What version are they - crappy pic - Charlie8521 12:18:10 10/14/16 (5)
  - RE: What version are they - crappy pic - KanedaK 06:46:39 10/18/16 (1)
    - no kidding! And they aren't likely to have lung cancer! - maxhifi 17:01:21 10/18/16 (0)
  - RE: What version are they - crappy pic - djk 13:00:58 10/14/16 (2)
    - Is this the AL kit you are referencing? - Charlie8521 15:02:06 10/14/16 (1)
      - RE: Is this the AL kit you are referencing? - djk 16:26:42 10/17/16 (0)
- Why the question - Charlie8521 16:01:42 10/13/16 (5)
  - RE: Why the question - Bill Fitzmaurice 04:40:02 10/14/16 (4)
    - Considered that, - Charlie8521 05:19:00 10/14/16 (3)
      - RE: Considered that, - Bill Fitzmaurice 07:41:32 10/14/16 (2)
        
        And did that - Charlie8521 11:57:46 10/14/16 (1)
        
        RE: And did that 1" MDF - freddyi 21:39:31 10/14/16 (0)
- RE: La Scala speaker surround durability - George S. Roland 14:02:42 10/13/16 (3)
  - RE: La Scala speaker surround durability - claudej1@aol.com 14:15:46 10/13/16 (2)
    - The early Klipschs used EV and had paper surrounds - Kloss 06:27:36 10/14/16 (0)
    - RE: La Scala speaker surround durability - djk 14:49:32 10/13/16 (0)
Freddyi.... - Ivan303 20:52:40 10/11/16 (2)
- RE: Freddyi.... - freddyi 21:21:31 10/11/16 (1)
  - RE: Freddyi.... - Steve Schell 21:31:48 11/01/16 (0)
Variance in compression driver 1 3/8" threads ? - freddyi 00:19:11 10/11/16 (3)
- Celestion - djk 13:42:05 10/11/16 (2)
  - RE: Celestion - freddyi 21:28:00 10/11/16 (1)
    - I recognize that ad - Alpha Al 13:18:52 10/12/16 (0)
Ideal wideband driver size? - PaulF70 16:36:26 10/08/16 (11)
- RE: Ideal wideband driver size? - TRUFI 07:59:02 10/09/16 (4)
  - RE: Ideal wideband driver size? - PaulF70 12:10:08 10/09/16 (3)
    - AN 15's ? - bare 10:05:29 10/10/16 (2)
      - RE: AN 15's ? - PaulF70 18:41:36 10/10/16 (1)
        
        If its (only) Nouns, perhaps its pseudo-Deutsch (nt) - mhardy6647 16:49:08 10/17/16 (0)
- RE: Ideal wideband driver size? - datman 07:34:39 10/09/16 (2)
  - RE: Ideal wideband driver size? - PaulF70 14:41:37 11/20/16 (1)
    - RE: Ideal wideband driver size? - datman 15:15:30 11/20/16 (0)
- FWIW, I've long opined that 8" is a sweet spot - mhardy6647 16:55:28 10/08/16 (2)
  - RE: FWIW, I've long opined that 8" is a sweet spot - Mick Wolfe 08:43:40 10/10/16 (0)
  - Agreed. - Paul Joppa 19:58:17 10/08/16 (0)
Who likes their Lowthers with tweeters - PaulF70 16:24:30 10/08/16 (3)
- RE: Who likes their Lowthers with tweeters - Rod M 19:55:44 10/10/16 (1)
  - RE: Who likes their Lowthers with tweeters - Don Reid 13:16:45 10/17/16 (0)
- RE: Who likes their Lowthers with tweeters - pcuser 13:22:48 10/10/16 (0)
couldn't resist - mhardy6647 05:47:23 10/07/16 (10)
- RE: couldn't resist - Crazy Dave 11:50:39 10/11/16 (0)
- RE: couldn't resist - moray james 08:55:58 10/08/16 (2)
  - I shall try that anon - mhardy6647 17:18:04 10/08/16 (1)
    - RE: I shall try that anon - moray james 18:28:37 10/08/16 (0)
- RE: couldn't resist - mah 22:08:57 10/07/16 (0)
- RE: couldn't resist - kyle 07:16:37 10/07/16 (4)
  - they're 604Es and the lug is too big - mhardy6647 17:00:24 10/07/16 (3)
    - RE: they're 604Es and the lug is too big - kyle 21:31:19 10/07/16 (2)
      - oops, an apology is in order - mhardy6647 14:22:05 10/13/16 (0)
      - The XOs are hardwired - mhardy6647 04:56:34 10/08/16 (0)
Sansui SP-3005 project confusion - maxhifi 23:01:53 10/04/16 (30)
- New cabinet - maxhifi 09:11:32 12/05/16 (0)
- Japanese Brochure & specs - maxhifi 14:57:28 10/25/16 (2)
  - RE: Japanese Brochure & specs - FRG7SWL 11:44:27 10/27/16 (1)
    - RE: Japanese Brochure & specs - maxhifi 12:09:03 10/27/16 (0)
- More to this than I thought. - maxhifi 22:29:54 10/12/16 (6)
  - RE: More to this than I thought. - Crazy Dave 07:02:11 10/13/16 (5)
    - RE: Simplify Sansui Speaker Crossovers And Enjoy - FRG7SWL 08:53:55 10/15/16 (4)
      - RE: Simplify Sansui Speaker Crossovers And Enjoy - Crazy Dave 07:00:54 10/19/16 (3)
        
        RE: Simplify Sansui Speaker Crossovers And Enjoy - maxhifi 07:21:35 10/19/16 (2)
        
        RE: Simplify Sansui Speaker Crossovers And Enjoy - FRG7SWL 16:56:39 10/19/16 (1)
        
        RE: Simplify Sansui Speaker Crossovers And Enjoy - maxhifi 08:52:18 10/20/16 (0)
- RE: Sansui SP-3005 project confusion - Paul Joppa 09:57:57 10/06/16 (3)
  - Second Woofer Measurement - maxhifi 13:46:24 10/07/16 (0)
  - RE: Sansui SP-3005 project confusion - Bill Fitzmaurice 10:08:55 10/06/16 (1)
    - RE: Sansui SP-3005 project confusion - maxhifi 10:45:22 10/06/16 (0)
- RE: Sansui SP-3005 project confusion - Don Reid 18:57:01 10/05/16 (8)
  - RE: Sansui SP-3005 project confusion - maxhifi 22:18:10 10/05/16 (7)
    - RE: Sansui SP-3005 project confusion - Crazy Dave 14:38:47 10/11/16 (1)
      - RE: Sansui SP-3005 project confusion - maxhifi 14:32:53 10/12/16 (0)
    - RE: Sansui SP-3005 project confusion - Don Reid 14:47:24 10/07/16 (0)
    - RE: Sansui SP-3005 project confusion - weltersys 05:48:43 10/07/16 (3)
      - RE: Sansui SP-3005 project confusion - maxhifi 08:58:48 10/07/16 (2)
        
        RE: Sansui SP-3005 project confusion - weltersys 14:18:03 10/08/16 (1)
        
        RE: Sansui SP-3005 project confusion - maxhifi 16:09:52 10/09/16 (0)
- RE: Sansui SP-3005 project confusion - Bill Fitzmaurice 07:52:49 10/05/16 (5)
  - RE: Sansui SP-3005 project confusion - maxhifi 09:07:44 10/05/16 (3)
    - RE: Sansui SP-3005 project confusion - Bill Fitzmaurice 19:43:18 10/07/16 (0)
    - RE: Sansui SP-3005 project confusion - maxhifi 17:06:09 10/07/16 (0)
    - RE: Sansui SP-3005 project confusion - hennfarm 15:52:15 10/07/16 (0)
  - RE: "an 8 to 10dB hump at 70Hz. I can't imagine listening to that"... - Ivan303 08:03:13 10/05/16 (0)
is foam board insulation good to reduce volume of horn back chambers? - freddyi 23:11:49 10/03/16 (6)
- RE: is foam board insulation good to reduce volume of horn back chambers? - bare 13:27:14 10/06/16 (0)
- RE: is foam board insulation good to reduce volume of horn back chambers? - Coner 10:17:09 10/04/16 (0)
- The stuff with the card stock laminated onto it? - rickmcinnis@dogwoodfabrics.com 09:29:25 10/04/16 (2)
  - RE: The stuff with the card stock laminated onto it? - Coner 14:42:53 10/04/16 (0)
  - RE: The stuff with the card stock laminated onto it? - Don Reid 13:59:11 10/04/16 (0)
- RE: is foam board insulation good to reduce volume of horn back chambers? - Bill Fitzmaurice 05:15:25 10/04/16 (0)
Jensen H222 - gberchin 06:52:39 10/02/16 (8)
- RE: Jensen H222 - gberchin 12:58:44 05/03/19 (0)
- RE: Jensen H222 - freddyi 14:24:11 10/02/16 (4)
  - RE: Jensen H222 - gberchin 15:54:04 10/02/16 (3)
    - RE: Jensen H222 - Wojciech 17:57:35 10/11/16 (2)
      - RE: Jensen H222 - Wojciech 18:45:58 10/11/16 (0)
      - RE: Jensen H222 - gberchin 18:08:47 10/11/16 (0)
- RE: Jensen H222 - Kloss 10:05:42 10/02/16 (1)
  - RE: Jensen H222 - gberchin 10:20:37 10/02/16 (0)
should relatively large braces in small folded midbass horn have openings? - freddyi 22:41:13 10/01/16 (7)
- RE: should relatively large braces in small folded midbass horn have openings? - Scholl 09:49:46 10/02/16 (1)
  - RE: should relatively large braces in small folded midbass horn have openings? - freddyi 14:11:33 10/02/16 (0)
- EDGAR show horn should accommodate a 12 inch driver... - Ivan303 09:40:47 10/02/16 (1)
  - RE: EDGAR show horn should accommodate a 12 inch driver... - freddyi 13:41:51 10/02/16 (0)
- RE: should relatively large braces in small folded midbass horn have openings? - Bill Fitzmaurice 06:41:02 10/02/16 (2)
  - RE: should relatively large braces in small folded midbass horn have openings? - freddyi 14:31:15 10/02/16 (1)
    - RE: should relatively large braces in small folded midbass horn have openings? - Bill Fitzmaurice 15:21:32 10/02/16 (0)
Smaller, Vintage Altec Lansing Speakers - Frihed89 12:49:41 10/01/16 (48)
- RE: Smaller, Vintage Altec Lansing Speakers - amandarae 12:10:47 10/03/16 (0)
- Another recommendation - Salectric 07:27:08 10/03/16 (2)
  - RE: Another recommendation - bald2 09:42:49 03/10/17 (0)
  - 2nd the Jensens - lokie 12:50:42 10/03/16 (0)
- hope you (i,e., the OP) didn't mind the topic drift! (nt) - mhardy6647 05:05:16 10/03/16 (1)
  - I think I have enough to go on, now. Thanks, though - Frihed89 08:34:09 10/03/16 (0)
- RE: Smaller, Vintage Altec Lansing Speakers - Joe Roberts 10:15:17 10/02/16 (27)
  - RE: Smaller, Vintage Altec Lansing Speakers - freddyi 14:50:43 10/02/16 (1)
    - Starker - Joe Roberts 07:35:39 10/04/16 (0)
  - the question was begged -- - mhardy6647 10:53:56 10/02/16 (24)
    - RE: the question was begged -- - Joe Roberts 11:09:55 10/02/16 (23)
      - Thanks. How different are the Emilar horns (really) than 811Bs? - mhardy6647 13:47:49 10/02/16 (22)
        
        RE: Thanks. How different are the Emilar horns (really) than 811Bs? - Joe Roberts 14:34:05 10/02/16 (21)
        
        OK, I need to see a man about some horns! :-) - mhardy6647 04:01:28 10/03/16 (0)
        
        RE: Thanks. How different are the Emilar horns (really) than 811Bs? - Joe Roberts 14:34:55 10/02/16 (19)
        
        RE: Thanks. How different are the Emilar horns (really) than 811Bs? - freddyi 14:54:40 10/02/16 (18)
        
        RE: Thanks. How different are the Emilar horns (really) than 811Bs? - Joe Roberts 15:26:44 10/02/16 (17)
        
        RE: Thanks. How different are the Emilar horns (really) than 811Bs? - freddyi 16:06:22 10/02/16 (16)
        
        RE: Thanks. How different are the Emilar horns (really) than 811Bs? - Joe Roberts 16:22:04 10/02/16 (15)
        
        RE: Thanks. How different are the Emilar horns (really) than 811Bs? - freddyi 16:35:40 10/02/16 (14)
        
        RE: Thanks. How different are the Emilar horns (really) than 811Bs? - Joe Roberts 17:13:32 10/02/16 (13)
        
        RE: Thanks. How different are the Emilar horns (really) than 811Bs? - freddyi 17:56:06 10/02/16 (12)
        
        RE: Thanks. How different are the Emilar horns (really) than 811Bs? - Joe Roberts 18:39:43 10/02/16 (11)
        
        RE: Thanks. How different are the Emilar horns (really) than 811Bs? - gilmorneau 20:29:53 10/02/16 (10)
        
        RE: Thanks. How different are the Emilar horns (really) than 811Bs? - Randal P 19:36:31 10/03/16 (3)
        
        RE: Thanks. How different are the Emilar horns (really) than 811Bs? - gilmorneau 06:25:45 10/04/16 (0)
        
        RE: tuning cabs for 414A - gilmorneau 20:57:43 10/03/16 (1)
        
        RE: tuning cabs for 414A - Randal P 04:45:51 10/04/16 (0)
        
        RE: Thanks. How different are the Emilar horns (really) than 811Bs? - Joe Roberts 20:43:33 10/02/16 (5)
        
        RE: Thanks. How different are the Emilar horns (really) than 811Bs? - gilmorneau 21:08:48 10/03/16 (0)
        
        sorry, I was asleep! :-) - mhardy6647 04:00:04 10/03/16 (3)
        
        RE: sorry, I was asleep! :-) - Joe Roberts 06:41:51 10/03/16 (2)
        
        "Friends don't let friends 'do' Klipsch" ;-) - mhardy6647 07:04:08 10/03/16 (1)
        
        RE: "Friends don't let friends 'do' Klipsch" ;-) "Klipschorns have ruined my life" ;^) - freddyi 11:39:14 10/03/16 (0)
- Thanks for your replies. One thing more, though - Frihed89 02:34:43 10/02/16 (1)
  - There are few better loudspeakers than the classic Altecs for fleapower - mhardy6647 03:55:07 10/02/16 (0)
- RE: Smaller, Vintage Altec Lansing Speakers - Inmate51 19:59:28 10/01/16 (0)
- PS You are NOT barking up the wrong tree - mhardy6647 19:09:19 10/01/16 (2)
  - RE: PS You are NOT barking up the wrong tree - freddyi 14:58:30 10/02/16 (1)
    - I came SO CLOSE to buying a used Crown "Drivecore" amp a coupla weeks ago... - mhardy6647 04:05:37 10/03/16 (0)
- small is relative... - mhardy6647 18:46:08 10/01/16 (1)
  - +1 for the Santiago; another great choice! nt - viridian 19:46:35 10/01/16 (0)
- RE: Smaller, Vintage Altec Lansing Speakers - mah 17:12:19 10/01/16 (0)
- I would take a pass on the Santanas............. - viridian 16:33:19 10/01/16 (1)
  - FWIW, I concur, in spades... - mhardy6647 19:01:44 10/01/16 (0)
- RE: Smaller, Vintage Altec Lansing Speakers - tedk. 12:55:59 10/01/16 (2)
  - Can you tell me more - Frihed89 15:53:25 10/01/16 (1)
    - RE: Can you tell me more - Uncle Mike 16:21:38 10/01/16 (0)
Your Help Is Needed - thetubeguy1954 05:45:12 09/30/16 (2)
- RE: Your Help Is Needed - George S. Roland 07:10:11 09/30/16 (1)
  - RE: Your Help Is Needed - thetubeguy1954 10:38:29 09/30/16 (0)
Took about 5 years off, began a build today: Utah V12 RXC21s - kitch29 08:17:33 09/29/16 (0)
Just got some Altec 19s. first impressions - DAK 22:00:38 09/27/16 (31)
- RE: Just got some Altec 19s. ..... JBL-L112's are nice... - drummerwill 16:43:09 09/28/16 (4)
  - RE: Just got some Altec 19s. ..... JBL-L112's are nice... - DAK 11:38:54 09/29/16 (3)
    - RE: Just got some Altec 19s. ..... JBL-L112's are nice... - drummerwill 18:41:50 09/29/16 (2)
      - RE: Sorry to upset the apple cart.. - DAK 19:52:43 09/29/16 (1)
        
        RE: Sorry to upset the apple cart.. - E-Stat 09:33:30 10/01/16 (0)
- RE: Just got some Altec 19s. first impressions - George S. Roland 09:51:01 09/28/16 (0)
- RE: Just got some Altec 19s. first impressions - vinnie2 03:34:34 09/28/16 (24)
  - You mean this foam? - Tre' 10:56:30 09/28/16 (11)
    - RE: Is that an aftermarket thing? - DAK 11:41:26 09/29/16 (3)
      - RE: Is that an aftermarket thing? - Tre' 12:23:08 10/01/16 (0)
      - RE: Is that an aftermarket thing? - KanedaK 05:54:25 09/30/16 (0)
      - RE: Is that an aftermarket thing? - vinnie2 03:58:30 09/30/16 (0)
    - RE: You mean this foam? - vinnie2 03:49:31 09/29/16 (6)
      - RE Where can i get that part? nt. - DAK 11:47:43 09/29/16 (5)
        
        RE: RE Where can i get that part? nt. - Oface 11:49:48 09/29/16 (4)
        
        Many thanx , i just ordered some. nt. - DAK 20:18:31 09/29/16 (1)
        
        RE: Many thanx , i just ordered some. nt. - Oface 10:39:46 09/30/16 (0)
        
        RE: RE Where can i get that part? nt. - mah 17:39:18 09/29/16 (0)
        
        RE: thanx for the tip, i will check that nt. - DAK 12:16:03 09/29/16 (0)
  - RE: Just got some Altec 19s. first impressions - horn kid 05:42:11 09/28/16 (11)
    - RE: Just got some Altec 19s. first impressions - DAK 09:18:42 09/28/16 (10)
      - RE: Just got some Altec 19s. first impressions - mah 00:01:44 09/29/16 (9)
        
        RE: How big are the original cabs? nt - DAK 11:21:54 09/29/16 (8)
        
        RE: How big are the original cabs? nt - kyle 07:48:33 09/30/16 (0)
        
        Guessing 6 cu. ft....nt. - Coner 18:27:38 09/29/16 (6)
        
        RE: Guessing 6 cu. ft....nt. - DAK 20:01:17 09/29/16 (5)
        
        RE: Guessing 6 cu. ft....nt. - mah 20:55:02 09/29/16 (4)
        
        RE: Guessing 6 cu. ft - thetubeguy1954 06:02:26 09/30/16 (3)
        
        RE: Guessing 6 cu. ft - mah 17:32:50 09/30/16 (0)
        
        RE: Guessing 6 cu. ft - mah 17:27:45 09/30/16 (1)
        
        Come Again? (nt) - thetubeguy1954 11:26:34 10/16/16 (0)
"series" notch filter with Khorn - why am I not seeing more effect? - freddyi 22:03:53 09/26/16 (16)
- RE: "series" notch filter with Khorn - why am I not seeing more effect? - tomservo 11:37:23 09/29/16 (5)
  - ? - djk 16:44:03 09/29/16 (1)
    - RE: ? - freddyi 20:21:13 09/30/16 (0)
  - RE: "series" notch filter with Khorn - why am I not seeing more effect? - freddyi 15:00:27 09/29/16 (2)
    - RE: "series" notch filter with Khorn - why am I not seeing more effect? - tomservo 07:37:37 09/30/16 (1)
      - RE: "series" notch filter with Khorn - why am I not seeing more effect? - freddyi 11:20:51 09/30/16 (0)
- RE: "series" notch filter with Khorn - why am I not seeing more effect? - pictureguy 00:53:29 09/28/16 (0)
- RE: "series" notch filter with Khorn - why am I not seeing more effect? - Inmate51 20:29:56 09/27/16 (1)
  - RE: "series" notch filter with Khorn - why am I not seeing more effect? - freddyi 22:06:16 09/27/16 (0)
- RE: "series" notch filter with Khorn - why am I not seeing more effect? - Coner 20:10:14 09/27/16 (2)
  - RE: "series" notch filter with Khorn - why am I not seeing more effect? - freddyi 21:21:18 09/27/16 (1)
    - RE: "series" notch filter with Khorn - why am I not seeing more effect? - Coner 22:36:11 09/27/16 (0)
- RE: "series" notch filter with Khorn - why am I not seeing more effect? - hennfarm 12:22:27 09/27/16 (0)
- Gee, maybe because Karlssons are an interesting rathole, ..... - Timbo in Oz 04:21:06 09/27/16 (2)
  - Yep, sorry. - Timbo in Oz 10:16:30 09/27/16 (0)
  - un called for you need to apologize - moray james 09:59:04 09/27/16 (0)
0.7 scale S9 - would look like "this" - freddyi 05:30:04 09/24/16 (0)
K12 vs large Advent - freddyi 01:48:24 09/22/16 (0)
Help identifying this 12" driver - hennfarm 19:35:35 09/21/16 (2)
- RE: Help identifying this 12" driver - hennfarm 00:43:12 09/22/16 (1)
  - RE: Help identifying this 12" driver - freddyi 01:41:03 09/22/16 (0)
Onken WB300--anybody ever hear it? - gilmorneau 21:37:38 09/20/16 (0)
PRV D250ph on Klipsch K700 vs PH612 - freddyi 20:15:46 09/20/16 (0)
When EQ-ing a Khorn w. notch filter - which mic perspective is dominate with what one hears ? - freddyi 21:00:34 09/19/16 (11)
- RE: When EQ-ing a Khorn w. notch filter - which mic perspective is dominate with what one hears ? - Inmate51 21:13:30 09/23/16 (2)
  - RE: When EQ-ing a Khorn w. notch filter - which mic perspective is dominate with what one hears ? - freddyi 22:53:35 09/23/16 (1)
    - F'whoop! - Timbo in Oz 04:23:15 09/27/16 (0)
- RE: When EQ-ing a Khorn w. notch filter - which mic perspective is dominate with what one hears ? - weltersys 08:12:39 09/22/16 (0)
- RE: When EQ-ing a Khorn w. notch filter - which mic perspective is dominate with what one hears ? - weltersys 17:36:28 09/21/16 (1)
  - RE: When EQ-ing a Khorn w. notch filter - which mic perspective is dominate with what one hears ? - freddyi 18:49:01 09/21/16 (0)
- - which mic perspective = what we hear? is the boom and indistinct bass my room walls or the Khorn Peak ? - freddyi 18:26:02 09/20/16 (4)
  - RE: - which mic perspective = what we hear? is the boom and indistinct bass my room walls or the Khorn Peak ? - tomservo 13:37:11 09/21/16 (3)
    - RE: - which mic perspective = what we hear? is the boom and indistinct bass my room walls or the Khorn Peak ? - freddyi 15:57:25 09/21/16 (2)
      - RE: - which mic perspective = what we hear? is the boom and indistinct bass my room walls or the Khorn Peak ? - tomservo 11:36:36 09/29/16 (1)
        
        RE: - which mic perspective = what we hear? is the boom and indistinct bass my room walls or the Khorn Peak ? - freddyi 14:56:54 09/29/16 (0)
Very early LaScala...check it out. - Coner 18:49:30 09/19/16 (5)
- I found the inspector of those speakers Tombstone. - Michael Samra 01:28:45 09/20/16 (1)
  - RE: I found the inspector of those speakers Tombstone. - KanedaK 03:09:12 09/20/16 (0)
- RE: Very early LaScala...check it out. - freddyi 22:06:55 09/19/16 (2)
  - RE: Very early LaScala...check it out. - Coner 17:51:27 09/20/16 (0)
  - RE: Very early LaScala...check it out. - Hornlover 07:58:46 09/20/16 (0)
Anyone here built a wood cone horn speaker? - vinnie2 15:05:04 09/19/16 (8)
- Thanks for all tips! (nt) - vinnie2 03:24:09 09/22/16 (0)
- RE: Anyone here built a wood cone horn speaker? - weltersys 17:53:36 09/21/16 (0)
- RE: Anyone here built a wood cone horn speaker? - moray james 17:50:19 09/19/16 (2)
  - RE: Anyone here built a wood cone horn speaker? - vinnie2 05:01:00 09/20/16 (1)
    - RE: Anyone here built a wood cone horn speaker? - moray james 06:22:43 09/20/16 (0)
- a thread from DIYaudio - RayP 15:30:27 09/19/16 (2)
  - RE: a thread from DIYaudio - EduardG 18:03:30 09/26/16 (0)
  - RE: a thread from DIYaudio - vinnie2 04:58:48 09/20/16 (0)
A very strong low freq. driver from Eminence - mdg 08:46:59 09/19/16 (7)
- RE: A very strong low freq. driver from Eminence - Hornlover 08:02:32 09/20/16 (0)
- RE: A very strong low freq. driver from Eminence - bwaslo 18:43:21 09/19/16 (0)
- RE: A very strong low freq. driver from Eminence - b.l.zeebub 14:27:52 09/19/16 (0)
- RE: A very strong low freq. driver from Eminence - Coner 09:26:07 09/19/16 (3)
  - RE: A very strong low freq. driver from Eminence - Bill Fitzmaurice 11:34:36 09/19/16 (2)
    - RE: A very strong low freq. driver from Eminence - lokie 07:55:38 09/20/16 (1)
      - RE: A very strong low freq. driver from Eminence - Bill Fitzmaurice 08:04:20 09/20/16 (0)
anyone here try North Reading's K-horn bass notch filter ? - freddyi 01:30:08 09/19/16 (0)
"they are there and you at some distance" vs "they are in your room" dynamic range requirements - freddyi 11:52:59 09/17/16 (6)
- RE: "they are there and you at some distance" vs "they are in your room" dynamic range requirements - weltersys 22:03:14 09/18/16 (3)
  - RE: "they are there and you at some distance" vs "they are in your room" dynamic range requirements - horn kid 16:02:12 09/19/16 (2)
    - RE: "they are there and you at some distance" vs "they are in your room" dynamic range requirements - mah 18:41:21 09/19/16 (1)
      - RE: "they are there and you at some distance" vs "they are in your room" dynamic range requirements - horn kid 19:20:05 09/19/16 (0)
- RE: Makes sense - Paul Eizik 10:03:21 09/18/16 (1)
  - RE: Makes sense - horn kid 15:43:46 09/18/16 (0)
Wich "t-amp" for bi-amping? - KanedaK 04:53:58 09/17/16 (6)
- RE: Wich "t-amp" for bi-amping? - KanedaK 05:15:47 09/30/16 (0)
- RE: Wich "t-amp" for bi-amping? - bare 15:55:25 09/17/16 (4)
  - RE: Wich "t-amp" for bi-amping? - KanedaK 23:22:15 09/17/16 (3)
    - RE: Wich "t-amp" for bi-amping? - bare 09:19:51 09/20/16 (1)
      - RE: Wich "t-amp" for bi-amping? - KanedaK 23:34:43 09/26/16 (0)
    - RE: Wich "t-amp" for bi-amping? - Hornlover 08:36:54 09/19/16 (0)
Inductor Size - geezerrocket 18:33:49 09/16/16 (7)
- RE: Inductor Size - b.l.zeebub 02:34:00 09/17/16 (5)
  - RE: Inductor Size - hahax@verizon.net 18:50:22 09/17/16 (4)
    - RE: Inductor Size - b.l.zeebub 04:48:43 09/18/16 (3)
      - RE: Inductor Size - hahax@verizon.net 20:39:05 09/18/16 (2)
        
        RE: Inductor Size - horn kid 05:46:17 09/29/16 (1)
        
        RE: Inductor Size - horn kid 07:01:36 09/30/16 (0)
- RE: Inductor Size - EduardG 18:41:17 09/16/16 (0)
Tekton M Lores? - jaydacus 07:37:42 09/16/16 (1)
- RE: Tekton M Lores? - Mick Wolfe 09:09:33 09/16/16 (0)
3KHz sine overtones - 2 K-tubes - 2 compression drivers (D250p vs BMD440) - freddyi 18:55:30 09/15/16 (0)
A magnificent headphone system or a marvelous stereo in a crappy room? - Paully 11:37:25 09/15/16 (22)
- RE: A magnificent headphone system or a marvelous stereo in a crappy room? - thump 02:44:18 11/12/16 (0)
- RE: A magnificent headphone system or a marvelous stereo in a crappy room? - dadbar 06:57:54 09/21/16 (1)
  - RE: A magnificent headphone system or a marvelous stereo in a crappy room? - horn kid 05:41:52 09/29/16 (0)
- RE: headphones may be more accurate than a lot of speakers - freddyi 16:02:08 09/20/16 (0)
- Can't staaaaaaaaaand headphones... plus... - musetap 21:22:11 09/19/16 (0)
- RE: A magnificent headphone system or a marvelous stereo in a crappy room? - mdg 06:59:41 09/18/16 (0)
- I've never liked being tethered to a headphone.... - Rod M 19:22:18 09/16/16 (0)
- RE: A magnificent headphone system or a marvelous stereo in a crappy room? - Frank Mena 17:40:57 09/16/16 (1)
  - I agree... - Rod M 19:32:38 09/16/16 (0)
- RE: A magnificent headphone system or a marvelous stereo in a crappy room? - maxhifi 06:51:26 09/16/16 (0)
- RE: A magnificent headphone system or a marvelous stereo in a crappy room? - johnsonad 05:37:14 09/16/16 (0)
- RE: A magnificent headphone system or a marvelous stereo in a crappy room? - bean 05:16:18 09/16/16 (1)
  - RE: A magnificent headphone system or a marvelous stereo in a crappy room? - triodesteve 12:01:26 09/16/16 (0)
- RE: A magnificent headphone system or a marvelous stereo in a crappy room? - vinnie2 04:10:27 09/16/16 (0)
- RE: A magnificent headphone system or a marvelous stereo in a crappy room? - KanedaK 04:06:08 09/16/16 (0)
- RE: A magnificent headphone system or a marvelous stereo in a crappy room? - bare 19:45:20 09/15/16 (0)
- RE: A magnificent headphone system or a marvelous stereo in a crappy room? - freddyi 18:58:54 09/15/16 (1)
  - RE: A magnificent headphone system or a marvelous stereo in a crappy room? - Scholl 04:58:09 09/18/16 (0)
- RE: A magnificent headphone system or a marvelous stereo in a crappy room? - DaveV 17:59:02 09/15/16 (0)
- RE: A magnificent headphone system or a marvelous stereo in a crappy room? - 6bq5 14:51:55 09/15/16 (0)
- RE: A magnificent headphone system or a marvelous stereo in a crappy room? - Scott L 12:48:34 09/15/16 (0)
- You paint a bleak picture - more about the room, please - rickmcinnis@dogwoodfabrics.com 12:19:45 09/15/16 (0)
"Hybrid bi-amping" try-out results - KanedaK 02:58:12 09/14/16 (4)
- RE: "Hybrid bi-amping" try-out results - Kingshead 05:17:56 09/17/16 (0)
- I am using a CREST Pro Lite 3.0 on my SEISMICS - rickmcinnis@dogwoodfabrics.com 11:10:30 09/14/16 (0)
- RE: "Hybrid bi-amping" try-out results - KanedaK 02:59:37 09/14/16 (1)
  - RE: "Hybrid bi-amping" try-out results - Hornlover 08:22:33 09/14/16 (0)
anyone happen to know the DCR for Klipsch 4mH AK3 inductor ? - freddyi 18:40:09 09/13/16 (9)
- Right Track - djk 16:22:25 09/15/16 (1)
  - RE: Right Track - freddyi 19:00:53 09/15/16 (0)
- RE: anyone happen to know the DCR for Klipsch 4mH AK3 inductor ? - Coner 07:26:21 09/14/16 (6)
  - RE: anyone happen to know the DCR for Klipsch 4mH AK3 inductor ? - freddyi 13:50:41 09/14/16 (5)
    - RE: anyone happen to know the DCR for Klipsch 4mH AK3 inductor ? - Coner 16:35:39 09/14/16 (4)
      - RE: anyone happen to know the DCR for Klipsch 4mH AK3 inductor ? - freddyi 18:58:55 09/14/16 (3)
        
        RE: anyone happen to know the DCR for Klipsch 4mH AK3 inductor ? - Coner 19:12:41 09/14/16 (2)
        
        RE: anyone happen to know the DCR for Klipsch 4mH AK3 inductor ? - freddyi 22:06:58 09/14/16 (1)
        
        RE: anyone happen to know the DCR for Klipsch 4mH AK3 inductor ? - Coner 22:44:24 09/14/16 (0)
Retor - a - finish - or something else for K-horn walnut veneer? - freddyi 14:11:59 09/12/16 (3)
- RE: Before you try a refinish.... - kitch29 07:21:28 09/13/16 (2)
  - RE: Before you try a refinish.... - freddyi 12:28:21 09/13/16 (1)
    - RE: Glad to help a guy who's been here even longer than me - kitch29 07:33:59 09/14/16 (0)
baffle width considerations when using a K-tube on top of a cabinet - freddyi 02:06:57 09/12/16 (4)
- RE: baffle width considerations when using a K-tube on top of a cabinet - Coner 22:49:04 09/12/16 (3)
  - RE: baffle width considerations when using a K-tube on top of a cabinet - freddyi 00:41:09 09/13/16 (2)
    - RE: baffle width considerations when using a K-tube on top of a cabinet - Coner 07:52:02 09/13/16 (1)
      - RE: baffle width considerations when using a K-tube on top of a cabinet - freddyi 09:47:10 09/13/16 (0)

Threads started on or before 3/31/07 are archived Here.
Threads started on or before 3/15/07 are archived Here.
Threads started on or before 2/28/07 are archived Here.
Threads started on or before 2/15/07 are archived Here.
Threads started on or before 1/31/07 are archived Here.

FAQ

Post a Message!

Forgot Password?

Moniker (Username):
Password (Optional):
	Remember my Moniker & Password (What's this?) Eat Me
E-Mail (Optional):
Subject:

Message:	(Posts are subject to Content Rules)

Optional Link URL:
Optional Link Title:
Optional Image URL:
Upload Image:
E-mail Replies:	Automagically notify you when someone responds.

To view your new posting or follow-up, click on the RELOAD or REFRESH button on your browser.