Amp/Preamp Asylum Looking for a new Amp or Preamp? If you're after tubes, post over here.

For Sale Ads FAQ / News / Events

AudioAsylum Trader AirTight ATC2 & ATM4 - Selling AirTight ATC2 Preamplifier & ATM 4 Pow... Proceed 5 Channel Amplifier - Proceed 5 Channel Amplifier by Mark Levinson in Ex...

• the continuing saga: how low can we go? - LtMandella 17:08:52 01/16/21 (11)
  • "Noiseless and black background" from below - Story 04:55:01 01/18/21 (4)
    • maybe I can - LtMandella 09:07:42 01/18/21 (0)
    • You mean like "poor recording quickly revealed" - airtime 06:38:04 01/18/21 (2)
      • RE: You mean like "poor recording quickly revealed" - Story 08:32:26 01/18/21 (1)
        • RE: You mean like "poor recording quickly revealed" - airtime 09:56:32 01/18/21 (0)
  • RE: the continuing saga: how low can we go? - Wojciech 18:55:16 01/17/21 (1)
    • RE: the continuing saga: how low can we go? - LtMandella 19:35:40 01/17/21 (0)
  • Cheap Ass Chi Fi ..what were you realistically expecting?? - bare 18:41:11 01/17/21 (1)
    • RE: Cheap Ass Chi Fi ..what were you realistically expecting?? - LtMandella 08:54:56 01/18/21 (0)
  • RE: the continuing saga: how low can we go? - sisterray 12:39:21 01/17/21 (1)
    • RE: the continuing saga: how low can we go? - KanedaK 00:00:04 01/19/21 (0)
• Need knob for Bogen Rp receiver - getahobby 07:07:31 01/15/21 (3)
  • RE: Need knob for Bogen Rp receiver - getahobby 13:16:16 01/15/21 (2)
    • Is it just broken? - Jonesy 14:01:26 01/16/21 (1)
      • RE: Is it just broken? - getahobby 07:29:33 01/18/21 (0)
• NAC C326BEE vs. Marantz PM6006 - mjcmt 13:12:28 01/14/21 (1)
  • RE: NAC C326BEE vs. Marantz PM6006 - airtime 06:30:04 01/15/21 (0)
• Advent 300 rebuild recommendations - volunteer 07:21:45 01/14/21 (3)
  • RE: Advent 300 rebuild recommendations - rivervalley817 21:25:31 01/14/21 (0)
  • RE: Advent 300 rebuild recommendations - 6bq5 20:53:45 01/14/21 (0)
  • RE: Advent 300 rebuild recommendations - kh6idf 08:14:08 01/14/21 (0)
• Old Nad vs. new NAD sound? - mjcmt 05:22:37 01/13/21 (54)
  • Thanks for feedback - bought Rega... - mjcmt 12:00:30 01/31/21 (0)
  • RE: Old Nad vs. new NAD sound? - Mali 13:18:28 01/16/21 (9)
    • Midrange makers are discovering that ... - Feanor 04:26:10 01/18/21 (8)
      • Hypex & Purifi. Same company.* - Mali 13:03:52 01/18/21 (2)
        • You're mistaken - E-Stat 16:08:34 01/18/21 (0)
        • RE: Hypex & Purifi. Same company. (Link) - Mali 13:04:31 01/18/21 (0)
      • RE: Midrange makers are discovering that ... - tketcham 06:19:09 01/18/21 (4)
        • RE: Midrange makers are discovering that ... - cawson@onetel.com 06:50:45 01/19/21 (3)
          • RE: Midrange makers are discovering that ... - tketcham 13:37:38 01/19/21 (2)
            • RE: Midrange makers are discovering that ... - cawson@onetel.com 15:13:25 01/19/21 (1)
              • RE: Midrange makers are discovering that ... - tketcham 07:23:35 01/20/21 (0)
  • My 35 y/o NAD 7130 receiver is still going strong - Feanor 04:49:30 01/15/21 (0)
  • RE: Old Nad vs. new NAD sound? - niws 20:32:47 01/14/21 (3)
    • RE: Old Nad vs. new NAD sound? - mjcmt 04:17:02 01/15/21 (2)
      • RE: Old Nad vs. new NAD sound? - airtime 06:31:46 01/15/21 (0)
      • RE: Old Nad vs. new NAD sound? - niws 05:54:43 01/15/21 (0)
  • My Panny - G Squared 06:53:14 01/14/21 (0)
  • RE: Old Nad vs. new NAD sound? - merid 16:35:37 01/13/21 (1)
    • RE: Old Nad vs. new NAD sound? - mjcmt 04:18:58 01/14/21 (0)
  • There will be a difference with compromises - E-Stat 16:19:10 01/13/21 (0)
  • RE: Old Nad vs. new NAD sound? - dean_martin 14:49:50 01/13/21 (3)
    • RE: Old Nad vs. new NAD sound? - mjcmt 15:38:20 01/13/21 (2)
      • RE: Old Nad vs. new NAD sound? - dean_martin 15:47:03 01/13/21 (1)
        • RE: Old Nad vs. new NAD sound? - mjcmt 04:20:19 01/14/21 (0)
  • RE: Old Nad vs. new NAD sound? - lancelot 13:50:09 01/13/21 (0)
  • RE: Old Nad vs. new NAD sound? - cawson@onetel.com 09:05:13 01/13/21 (17)
    • RE: Old Nad vs. new NAD sound? - mjcmt 15:40:12 01/13/21 (0)
    • RE: Old Nad vs. new NAD sound? - chocolate_lover9999@yahoo.com 11:58:12 01/13/21 (1)
      • RE: Old Nad vs. new NAD sound? - cawson@onetel.com 12:32:23 01/13/21 (0)
    • Yours is an interesting case - Feanor 10:18:34 01/13/21 (13)
      • hypex highs - DrChaos 19:15:11 01/13/21 (0)
      • :) - E-Stat 16:28:00 01/13/21 (2)
        • You're a die hard, E-Stat - Feanor 17:12:28 01/13/21 (1)
          • RE: You're a die hard, E-Stat - E-Stat 17:20:34 01/13/21 (0)
      • RE: Yours is an interesting case - cawson@onetel.com 12:17:14 01/13/21 (8)
        • I'll take your word for the Benchmark - Feanor 17:18:08 01/13/21 (0)
        • Just... - E-Stat 17:15:57 01/13/21 (6)
          • RE: Just... - cawson@onetel.com 05:59:15 01/14/21 (5)
            • RE: Just... - E-Stat 06:25:33 01/14/21 (4)
              • At least we agree on separates - Feanor 07:44:52 01/14/21 (3)
                • RE: At least we agree on separates - cawson@onetel.com 09:35:51 01/14/21 (1)
                  • Most likely - E-Stat 17:15:47 01/14/21 (0)
                • Choose whatever works best for you, but - E-Stat 08:22:44 01/14/21 (0)
  • RE: Old Nad - M3 lover 07:07:51 01/13/21 (1)
    • RE: Old Nad - mjcmt 15:45:05 01/13/21 (0)
  • RE: Old Nad vs. new NAD sound? - airtime 06:44:48 01/13/21 (3)
    • RE: Old Nad vs. new NAD sound? - mjcmt 07:39:06 01/13/21 (2)
      • RE: Old Nad vs. new NAD sound? - airtime 08:35:52 01/13/21 (1)
        • RE: Old Nad vs. new NAD sound? - mjcmt 23:57:46 01/15/21 (0)
  • RE: Old Nad vs. new NAD sound? - DustyC 06:06:48 01/13/21 (1)
    • RE: Old Nad vs. new NAD sound? - mjcmt 15:43:32 01/13/21 (0)
  • I had a 352BEE, but sold it. - ghost of olddude55 05:37:47 01/13/21 (2)
    • It took balls to post that.nt - viridian 21:21:07 01/13/21 (0)
    • RE: I had a 352BEE, but sold it. - mjcmt 15:45:43 01/13/21 (0)
• Plinius 8200 mkII or Sim Audio 700i - Aaron 01 18:36:04 01/12/21 (11)
  • To amplify Dave_K's post - Stale 16:34:52 01/21/21 (0)
  • Many years ago I compared the Plinius 9100 and Simaudio i-5 - Dave_K 09:49:44 01/14/21 (1)
    • RE: Many years ago I compared the Plinius 9100 and Simaudio i-5 - Aaron 01 17:22:20 01/14/21 (0)
  • I envy you - raingerz 21:13:16 01/12/21 (7)
    • 700i is only marginally better than the 600i - Luminator 22:36:00 01/12/21 (6)
      • RE: 700i is only marginally better than the 600i - fantja 03:25:25 01/14/21 (0)
      • RE: 700i is only marginally better than the 600i - Aaron 01 06:41:47 01/13/21 (4)
        • B&W Matrix 804 - Luminator 07:55:09 01/13/21 (3)
          • RE: B&W Matrix 804 - Aaron 01 09:53:35 01/13/21 (2)
            • 700i and B&W - Luminator 12:39:00 01/13/21 (1)
              • RE: 700i and B&W - fantja 22:46:55 01/15/21 (0)
• Primaluna integrated questions... - Valva Actual 14:20:58 01/09/21 (15)
  • RE: Primaluna integrated questions... - Wojciech 17:09:28 01/15/21 (1)
    • I appreciate your comments. Thanks nt. - Valva Actual 18:37:25 01/15/21 (0)
  • "my brand new Primaluna Integrated EVO 300 is away somewhere being fixed" - BS64 23:41:46 01/10/21 (2)
    • RE: "my brand new Primaluna Integrated EVO 300 is away somewhere being fixed" - mbnx01 16:45:12 01/15/21 (0)
    • RE: "my brand new Primaluna Integrated EVO 300 is away somewhere being fixed" - Valva Actual 12:48:41 01/11/21 (0)
  • RE: Primaluna integrated questions... - Palustris 08:51:26 01/10/21 (6)
    • RE: Primaluna integrated questions... - Valva Actual 17:47:01 01/10/21 (3)
      • RE: Primaluna integrated questions... - Blackdog 18:04:43 01/10/21 (2)
        • I understand and am similarly inclined... - Valva Actual 22:09:23 01/10/21 (1)
          • RE: I understand and am similarly inclined... - 6bq5 09:34:57 01/11/21 (0)
    • RE: Primaluna integrated questions... - Ivan303 09:09:05 01/10/21 (1)
      • variable gain preamp make a lot of sense - LtMandella 09:51:52 01/18/21 (0)
  • RE: Primaluna integrated questions... - RGA 02:40:31 01/10/21 (0)
  • RE: Primaluna integrated questions... - AbeCollins 15:17:30 01/09/21 (1)
    • RE: Primaluna integrated questions... - Valva Actual 19:30:15 01/09/21 (0)
• Techs. Opinions on interchange parts - getahobby 04:31:47 01/06/21 (19)
  • MCS ad from 1981 - BS64 17:12:58 01/14/21 (0)
  • RE: Techs. Opinions on interchange parts - getahobby 20:43:52 01/11/21 (3)
    • RE: Techs. Opinions on interchange parts - JURB 00:37:36 01/12/21 (2)
      • RE: Techs. Opinions on interchange parts - JURB 00:05:07 01/13/21 (1)
        • RE: Techs. Opinions on interchange parts - getahobby 06:20:43 01/13/21 (0)
  • RE: Techs. Opinions on interchange parts - Hornlover 10:33:32 01/11/21 (0)
  • ON Semicunductor website.... - Cougar 08:18:45 01/11/21 (0)
  • RE: Techs. Opinions on interchange parts - pictureguy 12:42:19 01/10/21 (0)
  • RE: Techs. Opinions on interchange parts - getahobby 19:31:35 01/07/21 (0)
  • RE: Techs. Opinions on interchange parts - AbeCollins 14:46:56 01/07/21 (0)
  • If we are talking about NTE replacement transistors rather than the OEMs - Ralph 12:57:57 01/07/21 (0)
  • I love it... - mlsstl 08:27:30 01/07/21 (0)
  • MCS 3125 was one of the "monster" receivers and a hidden classic - airtime 06:29:51 01/07/21 (0)
  • JC penny Receiver?? - bare 19:34:51 01/06/21 (0)
  • RE: Techs. Opinions on interchange parts - Blackdog 13:19:53 01/06/21 (0)
  • RE: Techs. Opinions on interchange parts - airtime 11:30:45 01/06/21 (0)
  • It's possible - Bill Way 09:23:44 01/06/21 (0)
  • RE: Techs. Opinions on interchange parts - Kal Rubinson 07:13:50 01/06/21 (0)
  • RE: Techs. Opinions on interchange parts - JURB 07:13:49 01/06/21 (0)
• Jolida JD801 ARC trouble, help needed - Javier 22:12:56 01/05/21 (7)
  • RE: Jolida JD801 ARC trouble, help needed - OneFish 21:16:56 01/07/21 (2)
    • RE: Jolida JD801 ARC trouble, help needed - Javier 22:56:07 01/07/21 (1)
      • RE: Jolida JD801 ARC trouble, help needed - airtime 06:30:49 01/08/21 (0)
  • RE: Jolida JD801 ARC trouble, help needed - airtime 18:32:15 01/06/21 (3)
    • How do i do that - Javier 21:24:56 01/06/21 (2)
      • RE: How do i do that - digepix 10:24:04 01/07/21 (1)
        • RE: How do i do that - Javier 22:51:10 01/07/21 (0)
• VTV Amplifier - Purifi EVAL-1 Option - emailtim 11:35:25 01/05/21 (13)
  • RE: VTV Amplifier - Purifi EVAL-1 Option - marc g. 13:21:21 01/08/21 (2)
    • RE: VTV Amplifier - Purifi EVAL-1 Option - emailtim 15:50:17 01/08/21 (1)
      • RE: VTV Amplifier - Purifi EVAL-1 Option - marc g. 16:39:39 01/10/21 (0)
  • Are they known for poor quality soldering ? - nt - AbeCollins 15:56:46 01/05/21 (3)
    • I have had a couple of VTV amps ... - Feanor 05:03:20 01/06/21 (0)
    • RE: Are they known for poor quality soldering ? - nt - emailtim 17:00:34 01/05/21 (1)
      • That soldering is not good at all. nt. - Cougar 17:57:17 01/05/21 (0)
  • Looks great -- I'd have gone for this when I bought - Feanor 12:39:14 01/05/21 (0)
  • Just curious - airtime 11:58:44 01/05/21 (4)
    • Which cable? - Feanor 12:34:27 01/05/21 (0)
    • Ghent Audio Harness Kit - emailtim 12:32:14 01/05/21 (2)
      • RE: Ghent Audio Harness Kit - airtime 06:22:22 01/06/21 (1)
        • RE: Ghent Audio Harness Kit - emailtim 08:26:26 01/06/21 (0)
• De Havilland Ultraverve 3 and Rogue Audio - Hawk28 21:10:08 01/04/21 (11)
  • RE: De Havilland Ultraverve 3 and Rogue Audio - Craiger56 12:40:07 01/24/21 (1)
    • RE: De Havilland Ultraverve 3 and Rogue Audio - Hawk28 17:11:53 01/24/21 (0)
  • RE: De Havilland Ultraverve 3 and Rogue Audio - airtime 06:49:34 01/05/21 (6)
    • RE: De Havilland Ultraverve 3 and Rogue Audio - Hawk28 07:10:05 01/05/21 (5)
      • RE: De Havilland Ultraverve 3 and Rogue Audio - AbeCollins 12:06:48 01/05/21 (4)
        • RE: "Hopefully this is the case with your De Havilland." - Ivan303 17:01:44 01/05/21 (2)
          • RE: "Hopefully this is the case with your De Havilland." - jaynemo 05:31:28 01/07/21 (1)
            • RE: "Hopefully this is the case with your De Havilland." - AbeCollins 14:49:51 01/07/21 (0)
        • RE: De Havilland Ultraverve 3 and Rogue Audio - Hawk28 17:01:43 01/05/21 (0)
  • Horrible match! - Ivan303 05:39:29 01/05/21 (1)
    • RE: Horrible match! - Hawk28 06:04:02 01/05/21 (0)
• Plinius 8200 mkii left channel out - Aaron 01 13:01:33 01/04/21 (0)
• Great Sounding Preamp for about $150 (not including .... - amandarae 23:05:46 01/02/21 (7)
  • RE: Great Sounding Preamp for about $150 (not including .... - LtMandella 07:02:57 01/04/21 (1)
    • RE: Great Sounding Preamp for about $150 (not including .... - amandarae 12:19:48 01/04/21 (0)
  • Wayne's Gizmo is good.. - bare 19:12:36 01/03/21 (4)
    • RE: Wayne's Gizmo is good.. - amandarae 12:03:01 01/04/21 (0)
    • At least - E-Stat 11:19:52 01/04/21 (0)
    • RE: Wayne's Gizmo is good.. - Story 02:04:02 01/04/21 (1)
      • RE: Wayne's Gizmo is good.. - amandarae 12:05:23 01/04/21 (0)
• Confession is in order - LtMandella 12:27:16 01/02/21 (43)
  • RE: Confession is in order - KanedaK 00:02:49 01/19/21 (4)
    • you convinced me - LtMandella 06:29:04 01/19/21 (3)
      • RE: you convinced me - KanedaK 21:32:53 01/19/21 (2)
        • RE: you convinced me - LtMandella 06:31:38 01/20/21 (1)
          • RE: you convinced me - KanedaK 22:28:25 01/20/21 (0)
  • RE: Confession is in order - KanedaK 23:38:34 01/18/21 (0)
  • At what cost "SOTA" amps nowadays? - Feanor 09:48:14 01/05/21 (1)
    • It all depends what's on your playlist :) - E-Stat 16:11:50 01/18/21 (0)
  • RE: Confession is in order - digepix 10:25:45 01/03/21 (8)
    • actually you still can - NuWave 15:39:22 01/04/21 (7)
      • RE: actually you still can - LtMandella 16:11:16 01/04/21 (6)
        • how does that work - NuWave 16:28:42 01/04/21 (5)
          • RE: how does that work - LtMandella 16:51:51 01/04/21 (4)
            • RE: how does that work - KanedaK 23:47:54 01/18/21 (0)
            • RE: how does that work - Grinnell 07:17:38 01/05/21 (2)
              • i never understood that..... - NuWave 09:41:12 01/06/21 (0)
              • RE: how does that work - LtMandella 08:32:29 01/05/21 (0)
  • RE: Confession is in order - Mick Wolfe 09:05:58 01/03/21 (0)
  • OK, which chip amp? - jedrider 16:41:17 01/02/21 (22)
    • RE: OK, which chip amp? - LtMandella 17:44:56 01/02/21 (21)
      • Now... - E-Stat 11:25:49 01/04/21 (20)
        • RE: Now... - LtMandella 18:05:54 02/08/21 (5)
          • Good luck! - E-Stat 05:35:47 02/09/21 (4)
            • RE: Good luck! - LtMandella 07:46:34 02/09/21 (3)
              • Plus... - E-Stat 07:52:31 02/09/21 (2)
                • RE: Plus... - LtMandella 07:57:28 02/09/21 (1)
                  • Good deal -nt - E-Stat 08:09:25 02/09/21 (0)
        • RE: Now... - LtMandella 15:42:31 01/18/21 (2)
          • Just return to - E-Stat 15:56:29 01/18/21 (1)
            • RE: Just return to - LtMandella 19:08:26 01/18/21 (0)
        • RE: Now... - LtMandella 12:12:09 01/04/21 (10)
          • RE: Now... - E-Stat 12:17:07 01/04/21 (9)
            • RE: Now... - KanedaK 23:57:39 01/18/21 (1)
              • I happily - E-Stat 06:08:26 01/19/21 (0)
            • RE: Now... - LtMandella 16:12:54 01/04/21 (6)
              • RE: Now... - E-Stat 16:26:03 01/04/21 (5)
                • RE: Now... - LtMandella 20:32:50 01/18/21 (0)
                • RE: Now... - LtMandella 17:12:11 01/04/21 (3)
                  • If only... - E-Stat 17:31:20 01/04/21 (2)
                    • RE: If only... - LtMandella 18:27:28 01/04/21 (1)
                      • ;) -nt - E-Stat 10:00:19 01/05/21 (0)
  • Audiophillia has never been about the actual sound in your room - Chip647 16:37:12 01/02/21 (1)
    • not my OTL - LtMandella 17:43:55 01/02/21 (0)
• So, my regular pre-amp is sick... - ghost of olddude55 15:18:57 01/01/21 (12)
  • RE: So, my regular pre-amp is sick... - Mike B. 14:56:47 01/03/21 (1)
    • It's a pretty simple device... - ghost of olddude55 04:05:18 01/04/21 (0)
  • Ghost, Did you resolder all the solder joints? - Cougar 09:08:19 01/02/21 (5)
    • When you resolder, do you just melt what's there, or do you add - alaskahiatt 11:01:33 01/02/21 (3)
      • Thanks to you both. nt - alaskahiatt 23:34:46 01/02/21 (0)
      • I remove the old solder and use a little flux to make sure... - Cougar 12:49:09 01/02/21 (0)
      • Don't know about Cougar, but I just do a reflow. - ghost of olddude55 11:27:07 01/02/21 (0)
    • Left channel isn't dead but it's coughing up blood. - ghost of olddude55 09:45:17 01/02/21 (0)
  • Welcome to analog... - Rod M 19:53:13 01/01/21 (0)
  • RE: So, my regular pre-amp is sick... - JURB 18:08:30 01/01/21 (2)
    • No headphone jack on the C-1. - ghost of olddude55 04:15:16 01/02/21 (1)
      • RE: No headphone jack on the C-1. - SgreenP@MSN.com 13:16:25 01/02/21 (0)
• Dynaco 400 outputs crossed - jeffl@yorku.ca 16:36:27 12/31/20 (6)
  • Maybe a dumb question... - mlsstl 09:02:29 01/01/21 (3)
    • RE: Maybe a dumb question... - jeffl@yorku.ca 10:00:02 01/01/21 (2)
      • RE: Maybe a dumb question... - mlsstl 11:18:27 01/01/21 (1)
        • RE: Maybe a dumb question... - jeffl@yorku.ca 12:01:36 01/01/21 (0)
  • Is it possible...................... - Kal Rubinson 18:07:08 12/31/20 (1)
    • RE: Is it possible...................... - jeffl@yorku.ca 19:19:24 12/31/20 (0)
• Hagerman Trumpet MC - Vacuum Tube Phonostage -New! - clarets2 16:31:37 12/30/20 (20)
  • RE: Hagerman Trumpet MC - Vacuum Tube Phonostage -New! - xsb7244 13:30:26 01/06/21 (1)
    • RE: Hagerman Trumpet MC - Vacuum Tube Phonostage -New! - mulveling 10:34:36 01/07/21 (0)
  • RE: Hagerman Trumpet MC - Vacuum Tube Phonostage -New! - mulveling 14:26:16 01/05/21 (5)
    • RE: Hagerman Trumpet MC - Vacuum Tube Phonostage -New! - mark maloof 16:27:30 11/06/22 (0)
    • RE: Hagerman Trumpet MC - Vacuum Tube Phonostage -New! - clarets2 22:00:22 01/05/21 (3)
      • RE: Hagerman Trumpet MC - Vacuum Tube Phonostage -New! - mulveling 10:38:36 01/07/21 (2)
        • RE: Hagerman Trumpet MC - Vacuum Tube Phonostage -New! - Dasyatis 18:57:24 03/28/21 (1)
          • RE: Hagerman Trumpet MC - Vacuum Tube Phonostage -New! - mark maloof 16:45:59 11/06/22 (0)
  • RE: Hagerman Trumpet MC - Vacuum Tube Phonostage -New! - xsb7244 14:07:13 12/31/20 (1)
    • that is peculiar isn't it...... - NuWave 16:31:04 01/04/21 (0)
  • RE: Hagerman Trumpet MC - Vacuum Tube Phonostage -New! - AbeCollins 18:24:45 12/30/20 (9)
    • RE: Hagerman Trumpet MC - Vacuum Tube Phonostage -New! - clarets2 19:34:03 12/30/20 (8)
      • RE: Hagerman Trumpet MC - Vacuum Tube Phonostage -New! - AbeCollins 09:59:44 12/31/20 (6)
        • RE: Hagerman Trumpet MC - Vacuum Tube Phonostage -New! - clarets2 14:03:27 01/02/21 (5)
          • RE: Hagerman Trumpet MC - Vacuum Tube Phonostage -New! - AbeCollins 16:17:50 01/05/21 (3)
            • RE: Hagerman Trumpet MC - Vacuum Tube Phonostage -New! - clarets2 21:46:43 01/05/21 (2)
              • RE: Hagerman Trumpet MC - Vacuum Tube Phonostage -New! - AbeCollins 09:57:28 01/06/21 (1)
                • You're making me itch Abe - airtime 11:22:18 01/06/21 (0)
          • It comes down to money - airtime 06:47:58 01/04/21 (0)
      • RE: Hagerman Trumpet MC - Vacuum Tube Phonostage -New! - airtime 07:22:22 12/31/20 (0)
• ARC D130 Mod/update - Charlie8521 04:51:06 12/30/20 (3)
  • That came out like 24 years ago or so... - kootenay 10:45:28 12/30/20 (0)
  • From experience - airtime 07:20:37 12/30/20 (0)
  • RE: ARC D130 Mod/update - triode3 05:03:28 12/30/20 (0)
• NAD C 298 Power Amplifier - Mali 17:16:46 12/29/20 (12)
  • RE: NAD C 298 Power Amplifier - fstein 10:17:09 12/30/20 (5)
    • Yes, the VTV buffers allow op amp rolling - Feanor 11:30:50 12/30/20 (4)
      • RE: Yes, the VTV buffers allow op amp rolling - fstein 13:51:02 12/30/20 (3)
        • Speaking of buffers. - Mali 14:09:02 12/30/20 (2)
          • Hooked it up. Holy smoke, - Mali 15:10:10 12/31/20 (1)
            • RE: Hooked it up. Holy smoke, - rivervalley817 15:39:51 12/31/20 (0)
  • So the NAD C298 employs Purifi technology - Feanor 04:52:13 12/30/20 (5)
    • RE: So the NAD C298 employs Purifi technology - fstein 21:21:10 12/30/20 (3)
      • Point is, some records are harder to listen to - Feanor 04:09:24 12/31/20 (2)
        • RE: Point is, some records are harder to listen to - fstein 07:38:09 12/31/20 (1)
          • "On the other hand ..." -nt - Feanor 08:12:18 12/31/20 (0)
    • RE: So the NAD C298 employs Purifi technology - Mali 09:23:43 12/30/20 (0)
• Parasound Zpre2 Level knob not responding - EJJ 14:19:21 12/29/20 (7)
  • RE: Parasound Zpre2 Level knob not responding - Jonesy 17:43:14 12/29/20 (6)
    • RE: Parasound Zpre2 Level knob not responding - EJJ 20:01:17 12/29/20 (5)
      • RE: Parasound Zpre2 Level knob not responding - Jonesy 20:41:40 12/29/20 (4)
        • RE: Parasound Zpre2 Level knob not responding - pictureguy 21:05:32 01/11/21 (0)
        • RE: Parasound Zpre2 Level knob not responding - EJJ 09:25:53 12/30/20 (2)
          • Great news! ... - Jonesy 09:49:39 12/30/20 (1)
            • RE: Great news! ... - pictureguy 21:07:44 01/11/21 (0)
• Diodes unsoldering themselves - fredtr 06:23:24 12/29/20 (9)
  • RE: Diodes unsoldering themselves - Mike B. 09:48:01 12/29/20 (1)
    • RE: Diodes unsoldering themselves - John Elison 22:27:05 12/30/20 (0)
  • RE: Diodes unsoldering themselves - Palustris 08:54:18 12/29/20 (2)
    • RE: Diodes unsoldering themselves - rivervalley817 09:04:24 12/29/20 (1)
      • RE: Diodes unsoldering themselves - Palustris 11:19:59 12/29/20 (0)
  • not yet in electronics but - Story 08:11:36 12/29/20 (1)
    • RE: not yet in electronics but - fredtr 10:49:52 12/29/20 (0)
  • RE: Diodes unsoldering themselves - airtime 06:39:42 12/29/20 (1)
    • RE: Diodes unsoldering themselves - rivervalley817 08:28:54 12/29/20 (0)
• Aegir Review -- Challenging Stereotypes (pun intended & longish) - mlsstl 12:16:47 12/27/20 (26)
  • Which "Hypex" amp? (nt) - Jon L 09:29:29 01/02/21 (1)
    • RE: Which "Hypex" amp? (nt) - mlsstl 09:48:36 01/02/21 (0)
  • RE: Aegir Review -- Challenging Stereotypes (pun intended & longish) - hairydog 07:38:39 12/30/20 (0)
  • RE: Aegir Review -- Challenging Stereotypes (pun intended & longish) - Ozzy 16:20:03 12/27/20 (22)
    • Nice review; still not sure if the Aegir fully suit my needs - Feanor 18:28:15 12/27/20 (21)
      • RE: Nice review; still not sure if the Aegir fully suit my needs - mlsstl 18:52:00 12/27/20 (20)
        • My counter point for the low power amplification crowd...... - AbeCollins 18:51:40 12/28/20 (14)
          • RE: My counter point for the low power amplification crowd...... - Utley1 19:57:12 12/28/20 (0)
          • So far... - mlsstl 19:53:06 12/28/20 (12)
            • RE: So far... - AbeCollins 21:01:45 12/28/20 (11)
              • Bi-Amping with Horns was the solution for me ....................... - Cut-Throat 08:41:07 12/29/20 (9)
                • RE: Bi-Amping with Horns was the solution for me ....................... - AbeCollins 14:17:55 12/29/20 (8)
                  • I tried to drive Maggies with a Dynaco Stereo 70 - ghost of olddude55 14:57:23 12/29/20 (6)
                    • RE: I tried to drive Maggies with a Dynaco Stereo 70 - mlsstl 16:27:55 12/29/20 (5)
                      • Actually... - ghost of olddude55 04:17:08 12/30/20 (4)
                        • RE: Actually... - mlsstl 06:29:13 12/30/20 (3)
                          • That's the same transformer I used. - ghost of olddude55 07:53:26 12/30/20 (2)
                            • Even dead & dirty ST70s... - mlsstl 09:27:04 12/30/20 (1)
                              • I ended up selling mine. - ghost of olddude55 09:28:13 12/30/20 (0)
                  • " I won't consider that Class D cheating" ................ - Cut-Throat 14:51:19 12/29/20 (0)
              • RE: So far... - Mick Wolfe 07:57:58 12/29/20 (0)
        • Yes, I'm tempted by the Aegir, but maybe two would be better - Feanor 06:03:39 12/28/20 (4)
          • RE: Yes, I'm tempted by the Aegir, but maybe two would be better - Mick Wolfe 08:27:02 12/28/20 (3)
            • RE: Yes, I'm tempted by the Aegir, but maybe two would be better - mikem 04:56:16 12/31/20 (2)
              • RE: Yes, I'm tempted by the Aegir, but maybe two would be better - hairydog 10:51:31 12/31/20 (0)
              • RE: Yes, I'm tempted by the Aegir, but maybe two would be better - Mick Wolfe 08:24:55 12/31/20 (0)
• Amber Series 70 amplifiers in mono question - Cuernavaca 12:10:43 12/26/20 (2)
  • RE: Amber Series 70 amplifiers in mono question - HighEndWire 05:22:39 12/27/20 (1)
    • RE: Amber Series 70 amplifiers in mono question - Palustris 07:53:54 12/27/20 (0)
• source for low voltage high quality caps? - Story 06:09:05 12/26/20 (5)
  • RE: source for low voltage high quality caps? - Blackdog 13:00:48 12/28/20 (1)
    • ok thanks much will check again /nt - Story 13:23:59 12/28/20 (0)
  • RE: source for low voltage high quality caps? - Palustris 08:48:16 12/26/20 (2)
    • "up to 16 volts dc" - 1973shovel 08:25:56 12/27/20 (1)
      • RE: "up to 16 volts dc" - Story 02:33:21 12/28/20 (0)
• Anyone ever hear of a Bozak CMA-50-1 Power Amplifier - JohnKutheRN 16:56:02 12/25/20 (3)
  • RE: Anyone ever hear of a Bozak CMA-50-1 Power Amplifier - duck decoy 17:28:55 12/25/20 (2)
    • RE: Anyone ever hear of a Bozak CMA-50-1 Power Amplifier - JohnKutheRN 18:24:48 12/25/20 (1)
      • It's actually Bozak CMA-1-50... - Jonesy 20:20:51 12/25/20 (0)
• Buzz, hum, graveyard - AudioDwebe 09:18:17 12/25/20 (6)
  • RE: Buzz, hum, graveyard - 6bq5 10:55:47 12/26/20 (1)
    • RE: Buzz, hum, graveyard - rivervalley817 11:09:10 12/26/20 (0)
  • RE: Buzz, hum, graveyard - mlsstl 06:19:00 12/26/20 (1)
    • RE: Buzz, hum, graveyard - AudioDwebe 08:55:40 12/26/20 (0)
  • Could be DC offset on your powerline... - jbrrp1 18:54:55 12/25/20 (1)
    • RE: Could be DC offset on your powerline... - AudioDwebe 08:53:02 12/26/20 (0)
• Tube Preamp Got a Hissy Channel - erik 15:32:19 12/24/20 (10)
  • You can try - airtime 06:33:32 12/25/20 (2)
    • RE: You can try - erik 08:25:20 12/25/20 (1)
      • RE: You can try - airtime 16:10:31 12/25/20 (0)
  • RE: Tube Preamp Got a Hissy Channel - JURB 17:14:11 12/24/20 (3)
    • "Switch the tubes channel to channel" - mlsstl 18:29:44 12/24/20 (2)
      • RE: "Switch the tubes channel to channel" - JURB 23:41:50 12/24/20 (1)
        • I often "leap before I look"... - Jonesy 08:19:40 12/27/20 (0)
  • FWIW, I found AA to be very good about warranty - LtMandella 17:03:54 12/24/20 (0)
  • First thing that popped into my mind... - mlsstl 16:30:29 12/24/20 (1)
    • RE: First thing that popped into my mind... - pictureguy 22:15:33 12/24/20 (0)
• John Ellison PSAudio Stellar M1200 - DanS 17:12:51 12/23/20 (30)
  • They sound spectacular with my Thiel CS3.7 speakers... - John Elison 04:48:41 12/24/20 (29)
    • I like your amp comparisons because... - AbeCollins 19:04:24 12/28/20 (1)
      • RE: I like your amp comparisons because... - John Elison 05:23:49 12/29/20 (0)
    • RE: They sound spectacular with my Thiel CS3.7 speakers... - fantja 03:26:37 12/28/20 (0)
    • RE: They sound spectacular with my Thiel CS3.7 speakers... - HiOnFi 07:40:58 12/25/20 (4)
      • RE: They sound spectacular with my Thiel CS3.7 speakers... - John Elison 10:16:43 12/25/20 (3)
        • RE: They sound spectacular with my Thiel CS3.7 speakers... - HiOnFi 06:01:19 12/26/20 (2)
          • RE: They sound spectacular with my Thiel CS3.7 speakers... - John Elison 09:03:42 12/26/20 (1)
            • RE: They sound spectacular with my Thiel CS3.7 speakers... - HiOnFi 06:56:31 12/28/20 (0)
    • Hey! Yours came with yellow lettering. Neat! - ghost of olddude55 06:34:57 12/24/20 (20)
      • RE: Hey! Yours came with yellow lettering. Neat! - HiOnFi 07:35:52 12/25/20 (6)
        • My room's smaller than that. - ghost of olddude55 07:51:22 12/25/20 (5)
          • RE: My room's smaller than that. - HiOnFi 08:16:18 12/25/20 (4)
            • Looking at Van Alstine also. - ghost of olddude55 08:18:03 12/25/20 (3)
              • Another consideration - E-Stat 11:26:59 12/25/20 (2)
                • I second this recommendation - Feanor 07:34:33 12/29/20 (0)
                • Thanx for the tip. Got 'er bookmarked. nt - ghost of olddude55 14:11:24 12/25/20 (0)
      • RE: Hey! Yours came with yellow lettering. Neat! - LtMandella 13:32:59 12/24/20 (12)
        • That's right. Who needs to go outside when you've got amps like that? - ghost of olddude55 14:18:37 12/24/20 (11)
          • RE: That's right. Who needs to go outside when you've got amps like that? - RGA 23:00:23 12/25/20 (1)
            • Been thinking on it... - ghost of olddude55 06:03:22 12/26/20 (0)
          • RE: That's right. Who needs to go outside when you've got amps like that? - LtMandella 14:52:04 12/24/20 (8)
            • I have no idea what raspberry pi is... - ghost of olddude55 15:04:46 12/24/20 (7)
              • The basis for an incredibly cost effective streamer... - E-Stat 17:26:29 12/24/20 (1)
                • Actually, I knew that. - ghost of olddude55 17:39:48 12/24/20 (0)
              • RE: I have no idea what raspberry pi is... - George S. Roland 15:57:00 12/24/20 (4)
                • RE: I have no idea what raspberry pi is... - LtMandella 17:23:01 12/24/20 (3)
                  • What did McGowan have to say about the pi? nt - ghost of olddude55 05:57:41 12/25/20 (2)
                    • He beats up on it near the end of this video on power supplies... - Jonesy 16:13:58 12/26/20 (1)
                      • Thanks. nt - ghost of olddude55 04:10:46 12/27/20 (0)
• Question about amp kit power supply - LtMandella 16:32:35 12/20/20 (43)
  • RE: Question about amp kit power supply - rivervalley817 12:35:53 12/24/20 (0)
  • Buy a decent lab power supply and be done with it.... - AbeCollins 08:44:42 12/24/20 (11)
    • RE: Buy a decent lab power supply and be done with it.... - LtMandella 13:27:32 12/24/20 (10)
      • RE: Buy a decent lab power supply and be done with it.... - AbeCollins 14:13:56 12/24/20 (9)
        • With so many boards sold on eBay for this kit... - Jonesy 18:28:30 12/24/20 (7)
          • Now that looks like a nice kit.... - AbeCollins 09:28:49 12/25/20 (6)
            • RE: Now that looks like a nice kit.... - rivervalley817 10:29:43 12/25/20 (5)
              • Thanks! Found some, a bit pricey but to be expected - nt - AbeCollins 09:01:04 12/27/20 (4)
                • RE: Thanks! Found some, a bit pricey but to be expected - nt - rivervalley817 09:56:52 12/27/20 (3)
                  • RE: Thanks! Found some, a bit pricey but to be expected - nt - AbeCollins 15:18:06 12/27/20 (2)
                    • RE: Thanks! Found some, a bit pricey but to be expected - nt - rivervalley817 15:31:05 12/27/20 (1)
                      • RE: Thanks! Found some, a bit pricey but to be expected - nt - AbeCollins 07:49:41 12/28/20 (0)
        • RE: Buy a decent lab power supply and be done with it.... - LtMandella 14:26:49 12/24/20 (0)
  • You can provide DC to an AC power connection - jedrider 09:20:11 12/23/20 (0)
  • RE: Question about amp kit power supply - cawson@onetel.com 04:07:15 12/23/20 (10)
    • No no no no no... - AbeCollins 07:57:24 12/24/20 (6)
      • RE: No no no no no... - cawson@onetel.com 11:58:07 12/25/20 (1)
        • RE: Obviously incorrect....... - AbeCollins 09:05:08 12/27/20 (0)
      • RE: No no no no no... - Jonesy 08:34:40 12/24/20 (3)
        • RE: No no no no no... - AbeCollins 08:45:32 12/24/20 (2)
          • RE: No no no no no... - Jonesy 09:05:46 12/24/20 (1)
            • RE: No no no no no... - AbeCollins 09:43:12 12/24/20 (0)
    • RE: Question about amp kit power supply - LtMandella 06:42:53 12/23/20 (2)
      • RE: Question about amp kit power supply - Jonesy 12:09:44 12/24/20 (1)
        • RE: Yikes! That's pretty scary. - LtMandella 14:33:56 12/24/20 (0)
  • The board in the pic says... - Jonesy 19:52:06 12/21/20 (2)
    • RE: The board in the pic says... - LtMandella 20:22:44 12/21/20 (1)
      • If you go transformer route... - Jonesy 21:03:26 12/21/20 (0)
  • RE: Question about amp kit power supply - pictureguy 15:08:57 12/21/20 (0)
  • amp kit power supply - bare 09:44:20 12/21/20 (3)
    • RE: amp kit power supply - LtMandella 11:14:56 12/21/20 (2)
      • RE: amp kit power supply - pictureguy 15:11:47 12/21/20 (1)
        • 92 1w/m Ref 3A DeCapos - LtMandella 14:23:42 12/24/20 (0)
  • RE: Question about amp kit power supply - Blackdog 04:40:30 12/21/20 (9)
    • RE: Question about amp kit power supply - B. Scarpia 08:12:09 12/21/20 (7)
      • RE: Question about amp kit power supply - AbeCollins 08:06:12 12/24/20 (2)
        • RE: Question about amp kit power supply - B. Scarpia 09:33:03 12/24/20 (1)
          • RE: Question about amp kit power supply - AbeCollins 09:48:26 12/24/20 (0)
      • RE: Question about amp kit power supply - LtMandella 08:28:10 12/21/20 (3)
        • RE: Question about amp kit power supply - B. Scarpia 09:28:08 12/21/20 (0)
        • RE: Question about amp kit power supply - G Squared 09:24:17 12/21/20 (1)
          • RE: Question about amp kit power supply - LtMandella 09:32:27 12/21/20 (0)
    • RE: Question about amp kit power supply - LtMandella 08:11:32 12/21/20 (0)
• Nord is basically a building heater - bullethead 21:47:56 12/17/20 (5)
  • RE: Nord is basically a building heater - mlsstl 05:52:32 12/18/20 (2)
    • Same for mine -nt - Feanor 04:52:23 12/21/20 (0)
    • RE: Nord is basically a building heater - bullethead 08:33:04 12/18/20 (0)
  • RE: Nord is basically a building heater - E-Stat 05:41:10 12/18/20 (1)
    • RE: Nord is basically a building heater - bullethead 08:31:29 12/18/20 (0)
• Cary 805 Question. - AudioDwebe 21:08:08 12/17/20 (10)
  • RE: Cary 805 Question. - rogerh113 06:20:24 12/22/20 (0)
  • RE: Cary 805 Question. - mrod 19:05:10 12/20/20 (2)
    • RE: Cary 805 Question. - AudioDwebe 10:00:12 12/21/20 (1)
      • RE: Cary 805 Question. - mrod 20:59:56 12/21/20 (0)
  • RE: Cary 805 Question. - 6bq5 11:38:26 12/18/20 (1)
    • Thank you. nt - AudioDwebe 08:52:07 12/21/20 (0)
  • RE: Cary 805 Question. - Rocket_Powered 06:26:42 12/18/20 (3)
    • RE: Cary 805 Question. - AudioDwebe 11:13:03 12/18/20 (2)
      • RE: Cary 805 Question. - Rocket_Powered 12:04:07 12/18/20 (1)
        • RE: Cary 805 Question. - AudioDwebe 15:16:58 12/18/20 (0)
• RIP Tim de Paravicini - jusbe 15:27:19 12/17/20 (5)
  • RE: RIP Tim de Paravicini - Craiger56 10:15:29 12/19/20 (0)
  • RE: RIP Tim de Paravicini - PAR 02:17:04 12/18/20 (0)
  • RE: RIP Tim de Paravicini - Luminator 18:28:35 12/17/20 (1)
    • RE: RIP Tim de Paravicini - fantja 21:09:43 12/22/20 (0)
  • RE: RIP Tim de Paravicini - 6bq5 17:38:41 12/17/20 (0)
• Budget integrated amp for vocals. - mjcmt 07:08:36 12/17/20 (19)
  • RE: Budget integrated amp for vocals. - telackey 12:44:39 01/02/21 (0)
  • NAD - mjcmt 12:46:29 12/18/20 (12)
    • RE: NAD - MaxwellP 06:08:34 12/19/20 (11)
      • RE: NAD - pictureguy 14:07:39 12/19/20 (2)
        • RE: NAD - MaxwellP 16:00:32 12/21/20 (1)
          • RE: NAD - pictureguy 00:51:13 12/22/20 (0)
      • RE: NAD - mjcmt 09:38:12 12/19/20 (7)
        • RE: NAD - Pgssider 05:15:57 12/21/20 (4)
          • RE: NAD - MaxwellP 16:25:58 12/21/20 (3)
            • RE: NAD - Joey54 02:21:14 01/03/21 (0)
            • RE: NAD - merid 08:14:38 12/22/20 (1)
              • Thanks...//nt - MaxwellP 10:37:05 12/22/20 (0)
        • RE: NAD - MaxwellP 13:36:35 12/19/20 (1)
          • RE: NAD - mjcmt 15:05:09 12/19/20 (0)
  • RE: Budget integrated amp for vocals. - KanedaK 21:51:29 12/17/20 (2)
    • RE: Budget integrated amp for vocals. - mjcmt 04:24:25 12/18/20 (1)
      • RE: Budget integrated amp for vocals. - KanedaK 00:04:26 12/21/20 (0)
  • RE: Budget integrated amp for vocals. - chocolate_lover9999@yahoo.com 08:18:24 12/17/20 (1)
    • RE: Budget integrated amp for vocals. - 6bq5 09:32:04 12/17/20 (0)
• Are there any internal pictures of the McIntosh McAire on the web? - g_greenamyer@yahoo.com 23:04:31 12/16/20 (2)
  • Where are you going with this? - airtime 09:01:56 12/17/20 (0)
  • Have you done a search? - Mike K 08:15:06 12/17/20 (0)
• WHY cannot this be measured? - LtMandella 13:40:39 12/16/20 (15)
  • What's causing the graininess? - Feanor 06:33:47 12/19/20 (3)
    • RE: What's causing the graininess? - LtMandella 08:35:50 12/19/20 (2)
      • You answered your own question -- it's in the recordings. - Brian H P 13:38:34 12/22/20 (1)
        • RE: You answered your own question -- it's in the recordings. - LtMandella 14:07:13 12/22/20 (0)
  • RE: It can be measured - Ralph 12:46:19 12/17/20 (1)
    • Nice post. nt - Tre' 17:39:28 12/17/20 (0)
  • RE: WHY cannot this be measured? - LtMandella 08:26:24 12/17/20 (2)
    • You are not alone - morricab 15:35:02 12/21/20 (1)
      • +1 nt - Tre' 17:57:52 12/24/20 (0)
  • RE: WHY cannot this be measured? - Tre' 08:12:51 12/17/20 (0)
  • RE: WHY cannot this be measured? - rivervalley817 21:16:56 12/16/20 (1)
    • Panasonic SA-XR full digital amps - Jon L 21:20:18 12/18/20 (0)
  • RE: WHY cannot this be measured? - 6bq5 20:56:36 12/16/20 (0)
  • RE: WHY cannot this be measured? - airtime 15:38:17 12/16/20 (0)
  • RE: WHY cannot this be measured? - ppopp 14:21:57 12/16/20 (0)
• THANK YOU ! ! - The Bored 16:33:38 12/15/20 (0)
• Can McIntosh McAire Stream Music HiDef?? - g_greenamyer@yahoo.com 22:39:13 12/14/20 (17)
  • RE: Can McIntosh McAire Stream Music HiDef?? - telackey 20:58:43 12/15/20 (1)
    • RE: Can McIntosh McAire Stream Music HiDef?? - telackey 10:27:34 12/17/20 (0)
  • RE: Can McIntosh McAire Stream Music HiDef?? - PAR 08:12:29 12/15/20 (11)
    • Hmmm - E-Stat 13:10:00 12/15/20 (4)
      • RE: Hmmm - PAR 16:16:55 12/15/20 (3)
        • No problemo, Pete :) - E-Stat 16:22:34 12/15/20 (2)
          • RE: No problemo, Pete :) - AbeCollins 19:50:35 12/15/20 (1)
            • I refer to its origin - E-Stat 21:53:16 12/15/20 (0)
    • RE: Can McIntosh McAire Stream Music HiDef?? - Sondek 09:49:42 12/15/20 (5)
      • RE: Can McIntosh McAire Stream Music HiDef?? - PAR 11:19:03 12/15/20 (1)
        • RE: Can McIntosh McAire Stream Music HiDef?? - Sondek 12:01:13 12/15/20 (0)
      • RE: Can McIntosh McAire Stream Music HiDef?? - AbeCollins 10:06:55 12/15/20 (2)
        • RE: Can McIntosh McAire Stream Music HiDef?? - E-Stat 13:18:10 12/15/20 (0)
        • RE: Can McIntosh McAire Stream Music HiDef?? - Sondek 10:11:30 12/15/20 (0)
  • My guess it not - E-Stat 07:54:50 12/15/20 (2)
    • RE: My guess it not - AbeCollins 09:36:23 12/15/20 (1)
      • For many... - E-Stat 10:21:29 12/15/20 (0)
• McIntosh McAire, Any opinions on this Unit? - g_greenamyer@yahoo.com 22:33:45 12/14/20 (2)
  • Antiquated 8 year old tech & over priced but... - AbeCollins 09:48:41 12/15/20 (0)
  • Two points - airtime 06:50:56 12/15/20 (0)
• Is McIntosh Audio USA owned company right now? - g_greenamyer@yahoo.com 22:29:23 12/14/20 (4)
  • RE: Is McIntosh Audio USA owned company right now? - The Dill 05:57:00 12/15/20 (3)
    • Yes to specific question but - E-Stat 08:00:50 12/15/20 (2)
      • Interesting.... - AbeCollins 09:57:43 12/15/20 (1)
        • RE: Interesting.... - E-Stat 10:20:33 12/15/20 (0)
• Best ss integrated ( $4k w/phono ? - mbnx01 13:37:33 12/14/20 (12)
  • RE: Best ss integrated ( $4k w/phono ? - Les Anderson 18:33:49 12/20/20 (0)
  • Luxman 505UVII - Hyfi 05:49:37 12/17/20 (1)
    • Luxman 505UXII that was - Hyfi 05:52:19 12/17/20 (0)
  • Two Options - creativepart 15:51:54 12/15/20 (3)
    • RE: Two Options - DanS 16:30:29 12/15/20 (2)
      • Opps, Sorry. Yes! - creativepart 17:42:29 12/15/20 (1)
        • RE: Opps, Sorry. Yes! - DanS 20:37:08 12/15/20 (0)
  • RE: Best ss integrated ( $4k w/phono ? - Mick Wolfe 09:49:57 12/15/20 (0)
  • RE: Best ss integrated ( $4k w/phono ? - rrsands 04:30:51 12/15/20 (2)
    • RE: Best ss integrated ( $4k w/phono ? - telackey 20:36:48 12/15/20 (0)
    • RE: Best ss integrated ( $4k w/phono ? - mbnx01 11:30:22 12/15/20 (0)
  • NAD M33 ? NT - cawson@onetel.com 15:34:24 12/14/20 (0)

Threads started on or before 4/30/07 are archived Here.
Threads started on or before 4/15/07 are archived Here.
Threads started on or before 3/31/07 are archived Here.
Threads started on or before 3/15/07 are archived Here.
Threads started on or before 2/28/07 are archived Here.

---

[ Top of Page ] [ Contact Us ] [ Support/Wish List ] [ Copyright © 2021, Audio Asylum, all rights reserved ]

---

[ General ] [ Speakers ] [ Tubes ] [ Vinyl ] [ Digital ] [ Hi-Rez ] [ Video Asylum ] [ Cables ] [ Tweaks/DIY ] [ Music ] [ Films ]

---