Amp/Preamp Asylum Looking for a new Amp or Preamp? If you're after tubes, post over here.

For Sale Ads FAQ / News / Events

AudioAsylum Trader Rega Research Elicit-R - Rega Research ElicitR Integrated Amp USED AS IS ... Fisher 500C - Have a gorgeous, very late model 500C that I'm...

• Vintage Meridian G57 or modern elctronic ? - thialismontfort 12:57:42 07/19/18 (13)
  • RE: Vintage Meridian G57 or modern elctronic ? - PAR 13:49:30 07/19/18 (12)
    • RE: Vintage Meridian G57 or modern elctronic ? - thialismontfort 14:14:58 07/19/18 (11)
      • RE: Vintage Meridian G57 or modern elctronic ? - PAR 16:10:58 07/19/18 (8)
        • RE: Vintage Meridian G57 or modern elctronic ? - thialismontfort 10:50:07 07/20/18 (0)
        • RE: Vintage Meridian G57 or modern elctronic ? - thialismontfort 10:00:02 07/20/18 (6)
          • RE: Vintage Meridian G57 or modern elctronic ? - PAR 13:50:11 07/20/18 (5)
            • RE: Vintage Meridian G57 or modern elctronic ? - thialismontfort 14:44:20 07/20/18 (4)
              • RE: Vintage Meridian G57 or modern elctronic ? - PAR 23:24:16 07/20/18 (3)
                • RE: Vintage Meridian G57 or modern elctronic ? - thialismontfort 03:48:23 07/21/18 (2)
                  • I have an idea... - PAR 06:26:51 07/21/18 (1)
                    • RE: I have an idea... - thialismontfort 10:33:49 07/23/18 (0)
      • RE: Vintage Meridian G57 or modern elctronic ? - mjcmt 16:10:47 07/19/18 (1)
        • RE: Vintage Meridian G57 or modern elctronic ? - thialismontfort 10:53:36 07/20/18 (0)
• Integrated amp recommendations at $500? - volunteer 14:53:40 07/18/18 (13)
  • Also check out Peachtree and Cyrus pre-owned. (nt) - Jonesy 07:47:17 07/21/18 (0)
  • Thanks for all the recommendations. - volunteer 07:45:20 07/21/18 (0)
  • RE: Integrated amp recommendations at $500? - BillH 10:27:22 07/20/18 (0)
  • RE: Integrated amp recommendations at $500? - chocolate_lover9999@yahoo.com 16:37:49 07/19/18 (0)
  • RE: Integrated amp recommendations at $500? - Demo 16:01:33 07/19/18 (0)
  • RE: Integrated amp recommendations at $500? - BCR 09:05:38 07/19/18 (0)
  • Check out the new PS Audio Sprout100 ($599 though)... - DeKay 18:17:39 07/18/18 (0)
  • Need a phono section? - Awe-d-o-file 18:08:39 07/18/18 (0)
  • OK, I'll play... - viridian 17:55:04 07/18/18 (0)
  • RE: Integrated amp recommendations at $500? - airtime 17:41:11 07/18/18 (1)
    • Agree----NT - lancelot 18:46:00 07/18/18 (0)
  • Tough crowd here . . . - Billy Wonka 16:26:28 07/18/18 (0)
  • RE: Integrated amp recommendations at $500? - The Dill 15:23:03 07/18/18 (0)
• PLLXO help please. - kappa546 16:02:55 07/17/18 (1)
  • RE: PLLXO help please. - kappa546 16:24:21 07/17/18 (0)
• SOny TA-NQ Amplifier - lmwaidhofer@yahoo.com 12:34:15 07/17/18 (3)
  • RE: SOny TA-N1 Amplifier - Ed Sawyer 12:58:18 07/23/18 (2)
    • I got one - jeromelang 19:49:38 08/05/18 (1)
      • RE: I got one - Ed Sawyer 20:00:18 08/05/18 (0)
• New audio Alchemy DPA 1 Class D Stereo Amp - HiOnFi 05:11:22 07/14/18 (15)
  • RE: New audio Alchemy DPA 1 Class D Stereo Amp - Hornlover 08:19:36 07/17/18 (4)
    • RE: New audio Alchemy DPA 1 Class D Stereo Amp - jdwaudio 18:18:29 07/17/18 (0)
    • Maybe a Moebius Transformer -NT - jedrider 17:15:38 07/17/18 (0)
    • RE: New audio Alchemy DPA 1 Class D Stereo Amp - HiOnFi 08:37:03 07/17/18 (1)
      • RE: New audio Alchemy DPA 1 Class D Stereo Amp - Hornlover 10:52:01 07/17/18 (0)
  • RE: New audio Alchemy DPA 1 Class D Stereo Amp - Daverz 21:29:28 07/14/18 (2)
    • RE: New audio Alchemy DPA 1 Class D Stereo Amp - HiOnFi 06:00:35 07/15/18 (1)
      • RE: New audio Alchemy DPA 1 Class D Stereo Amp - HiOnFi 07:42:29 07/16/18 (0)
  • RE: New audio Alchemy DPA 1 Class D Stereo Amp - Caucasian Blackplate 07:41:37 07/14/18 (6)
    • RE: New audio Alchemy DPA 1 Class D Stereo Amp - HiOnFi 08:49:25 07/14/18 (5)
      • RE: New audio Alchemy DPA 1 Class D Stereo Amp - Caucasian Blackplate 09:50:38 07/14/18 (4)
        • Agreed but still really low input impedence! {Nt} - DAVID 14:17:15 07/15/18 (1)
          • RE: Agreed but still really low input impedence! {Nt} - Caucasian Blackplate 16:41:10 07/16/18 (0)
        • RE: New audio Alchemy DPA 1 Class D Stereo Amp - HiOnFi 09:53:17 07/14/18 (1)
          • RE: New audio Alchemy DPA 1 Class D Stereo Amp - Caucasian Blackplate 18:06:33 07/14/18 (0)
• Audio Note OTO Phono SE valve set - yba_us@yahoo.com 08:47:52 07/12/18 (21)
  • RE: Audio Note OTO Phono SE valve set - Br3098 19:50:59 07/23/18 (0)
  • RE: Audio Note OTO Phono SE valve set - RGA 00:52:15 07/16/18 (0)
  • RE: Audio Note OTO Phono SE valve set - George47 03:51:51 07/14/18 (3)
    • RE: Audio Note OTO Phono SE valve set - yba_us@yahoo.com 08:43:03 07/14/18 (2)
      • RE: Audio Note OTO Phono SE valve set - Tidycat1 09:46:17 07/14/18 (1)
        • RE: Audio Note OTO Phono SE valve set - yba_us@yahoo.com 03:13:47 07/15/18 (0)
  • RE: Audio Note OTO Phono SE valve set - yba_us@yahoo.com 08:50:42 07/12/18 (14)
    • RE: Audio Note OTO Phono SE valve set - Wojciech 12:17:19 07/13/18 (1)
      • RE: Audio Note OTO Phono SE valve set - yba_us@yahoo.com 15:32:29 07/13/18 (0)
    • RE: Audio Note OTO Phono SE valve set - Caucasian Blackplate 08:47:27 07/13/18 (7)
      • RE: Audio Note OTO Phono SE valve set - yba_us@yahoo.com 09:32:25 07/13/18 (6)
        • Just one more thing ... - Sondek 09:59:56 07/13/18 (0)
        • RE: Audio Note OTO Phono SE valve set - Sondek 09:51:28 07/13/18 (4)
          • RE: Audio Note OTO Phono SE valve set - yba_us@yahoo.com 10:08:21 07/13/18 (3)
            • RE: Audio Note OTO Phono SE valve set - Sondek 11:12:04 07/13/18 (2)
              • RE: Audio Note OTO Phono SE valve set - yba_us@yahoo.com 12:13:51 07/13/18 (1)
                • RE: Audio Note OTO Phono SE valve set - Sondek 13:39:54 07/13/18 (0)
    • RE: Audio Note OTO Phono SE valve set - yba_us@yahoo.com 08:55:45 07/12/18 (3)
      • RE: Audio Note OTO Phono SE valve set - yba_us@yahoo.com 08:59:32 07/12/18 (2)
        • RE: Audio Note OTO Phono SE valve set - airtime 09:43:36 07/12/18 (1)
          • RE: Audio Note OTO Phono SE valve set - yba_us@yahoo.com 10:23:31 07/13/18 (0)
• Recapped my Linn LK280 - kh6idf 09:44:46 07/10/18 (1)
  • RE: Recapped my Linn LK280 - FenderLover 09:57:52 07/10/18 (0)
• I'm hollering for help this morning, too. Is it a full moon? ... - TeddiJackEddie 06:08:22 07/10/18 (5)
  • RE: I'm hollering for help this morning, too. Is it a full moon? ... - JURB 15:15:19 07/14/18 (0)
  • RE: I'm hollering for help this morning, too. Is it a full moon? ... - Caucasian Blackplate 16:30:30 07/10/18 (1)
    • Agree! (nt) - Crazy Dave 08:47:48 07/11/18 (0)
  • RE: I'm hollering for help this morning, too. Is it a full moon? ... - Bill Way 06:57:54 07/10/18 (0)
  • it is a waning crescent moon today - bullethead 06:29:04 07/10/18 (0)
• Help - bullethead 19:06:30 07/09/18 (12)
  • They could be metric of SAE - Mike B. 14:54:05 07/10/18 (0)
  • Go to Habor Frieght... - Rod M 20:01:20 07/09/18 (8)
    • Craftsman quality hasn't been Craftsman quality...... - Uncle Mike 04:40:45 07/10/18 (5)
      • RE: Craftsman quality hasn't been Craftsman quality...... - Crazy Dave 07:14:58 07/10/18 (4)
        • That all changed in the mid 80's... - Mr. Dick Hertz 08:38:41 07/10/18 (3)
          • RE: That all changed in the mid 80's... - Crazy Dave 08:44:32 07/11/18 (2)
            • RE: That all changed in the mid 80's... - JURB 10:33:52 07/14/18 (1)
              • RE: That all changed in the mid 80's... - pictureguy 14:48:43 07/29/18 (0)
    • RE: Go to Habor Frieght... - bullethead 20:11:42 07/09/18 (1)
      • RE: Go to Habor Frieght... - JURB 15:02:15 07/14/18 (0)
  • RE: Help - airtime 19:19:53 07/09/18 (1)
    • RE: Help - bullethead 19:23:30 07/09/18 (0)
• Tortuga Audio - Ozzie 10:16:15 07/09/18 (10)
  • RE: Tortuga Audio - HiOnFi 08:46:08 07/17/18 (0)
  • In my systems... - E-Stat 11:46:44 07/10/18 (0)
  • So you spend +$1000 to upgrade a CJ 'CLONE' ?!? - Feanor 10:36:21 07/09/18 (7)
    • RE: So you spend +$1000 to upgrade a CJ 'CLONE' ?!? - Ozzie 10:56:17 07/09/18 (6)
      • Ozzie, I was looking for further explanation, not to insult - Feanor 13:57:37 07/10/18 (2)
        • RE: Ozzie, I was looking for further explanation, not to insult - airtime 16:46:06 07/10/18 (1)
          • RE: Ozzie, I was looking for further explanation, not to insult - Crazy Dave 10:38:16 07/11/18 (0)
      • I wouldn't be knocking those speakers - airtime 11:42:08 07/09/18 (2)
        • RE: I wouldn't be knocking those speakers - Ozzie 12:55:48 07/09/18 (1)
          • RE: I wouldn't be knocking those speakers - airtime 15:25:15 07/09/18 (0)
• The End of a Frustrating Journey - LaszloPhoto 09:36:58 07/09/18 (10)
  • Unfortunately I've been down THAT road - airtime 11:45:32 07/09/18 (5)
    • RE: Unfortunately I've been down THAT road - LaszloPhoto 12:21:10 07/09/18 (4)
      • RE: Unfortunately I've been down THAT road - airtime 12:42:36 07/09/18 (3)
        • RE: Unfortunately I've been down THAT road - LaszloPhoto 19:15:17 07/09/18 (2)
          • Worked on a 1970s Fender Showman amp - FenderLover 20:31:29 07/09/18 (1)
            • Good to hear you like Belton - 1973shovel 05:44:40 07/10/18 (0)
  • RE: The End of a Frustrating Journey - acres verde 10:30:50 07/09/18 (3)
    • RE: The End of a Frustrating Journey - LaszloPhoto 10:47:01 07/09/18 (2)
      • RE: "...there's so much more can go wrong." - acres verde 10:32:20 07/10/18 (1)
        • Long tube life - LaszloPhoto 00:12:29 07/11/18 (0)
• THANK YOU ! ! - The Bored 08:56:50 07/09/18 (0)
• Is this A3 chinese manufactured amp a patent ripoff? - kenzo 14:17:54 07/08/18 (26)
  • RE: Is this A3 chinese manufactured amp a patent ripoff? - gordguide 12:21:37 08/20/18 (0)
  • RE: Is this A3 Chinese manufactured amp a patent ripoff? - DaveT 06:42:48 07/11/18 (1)
    • RE: Is this A3 Chinese manufactured amp a patent ripoff? - KanedaK 06:38:35 08/07/18 (0)
  • RE: Is this A3 chinese manufactured amp a patent ripoff? - Andy43 17:10:23 07/09/18 (6)
    • RE: Is this A3 chinese manufactured amp a patent ripoff? - kenzo 20:44:51 07/10/18 (0)
    • RE: Is this A3 chinese manufactured amp a patent ripoff? - triamp 02:34:17 07/10/18 (4)
      • RE: Is this A3 chinese manufactured amp a patent ripoff? - Rpower 04:56:04 07/11/18 (0)
      • RE: Is this A3 chinese manufactured amp a patent ripoff? - Andy43 17:59:09 07/10/18 (2)
        • RE: Is this A3 chinese manufactured amp a patent ripoff? - kenzo 12:45:04 07/14/18 (1)
          • RE: Is this A3 chinese manufactured amp a patent ripoff? - Rpower 13:16:21 07/15/18 (0)
  • A3 chinese manufactured amp a patent ripoff? Verbose respone - DaveT 08:24:02 07/09/18 (2)
    • That's a good point. Also? The Aleph 3 came out circa 1997 - any patents have expired. - David S. 14:53:44 07/09/18 (0)
    • Good Post - PAR 10:45:02 07/09/18 (0)
  • Very likely a copy - 13th Duke of Wymbourne 07:54:26 07/09/18 (0)
  • Yes.... - airtime 19:12:11 07/08/18 (2)
    • RE: No... - PAR 19:45:29 07/08/18 (1)
      • You are correct - airtime 06:58:55 07/09/18 (0)
  • Without a doubt - bare 18:52:18 07/08/18 (0)
  • RE: Is this A3 chinese manufactured amp a patent ripoff? - kenzo 18:47:52 07/08/18 (4)
    • RE: Is this A3 chinese manufactured amp a patent ripoff? - triamp 19:19:47 07/08/18 (2)
      • RE: Is this A3 chinese manufactured amp a patent ripoff? - kenzo 04:12:09 07/10/18 (1)
        • RE: Is this A3 chinese manufactured amp a patent ripoff? - airtime 09:18:19 07/10/18 (0)
    • RE: Is this A3 chinese manufactured amp a patent ripoff? - PAR 19:09:36 07/08/18 (0)
  • Not sure - RGA 16:01:29 07/08/18 (0)
  • RE: Is this A3 chinese manufactured amp a patent ripoff? - PAR 14:54:40 07/08/18 (1)
    • And it may be such a poor copy... - Ivan303 17:30:59 07/08/18 (0)
• adcom still in biz? - hifitommy 12:08:35 07/07/18 (6)
  • RE: adcom still in biz? - docw 13:43:46 07/08/18 (1)
    • in biz - hifitommy 15:19:10 07/08/18 (0)
  • RE: adcom still in biz? - Alex F. 14:33:22 07/07/18 (1)
    • still in biz - hifitommy 14:52:44 07/07/18 (0)
  • RE: adcom still in biz? - G Squared 12:24:00 07/07/18 (1)
    • still in biz - hifitommy 13:21:29 07/07/18 (0)
• Out of luck on Moscode Mods - AustinMoscode 20:32:16 07/05/18 (5)
  • RE: Out of luck on Moscode Mods - fstein 07:06:23 07/06/18 (1)
    • RE: Out of luck on Moscode Mods - AustinMoscode 20:29:36 07/06/18 (0)
  • RE: Out of luck on Moscode Mods - The Dill 05:49:44 07/06/18 (0)
  • RE: Out of luck on Moscode Mods - Chris Adams 05:36:43 07/06/18 (0)
  • RE: Out of luck on Moscode Mods - Coner 01:09:04 07/06/18 (0)
• went shopping today - bullethead 15:40:57 07/05/18 (16)
  • It's good to see others exploring different types of audio - please post more - airtime 13:34:49 07/07/18 (3)
    • RE: It's good to see others exploring different types of audio - please post more - bullethead 13:53:17 07/07/18 (2)
      • RE: It's good to see others exploring different types of audio - please post more - DrChaos 19:14:03 07/14/18 (1)
        • RE: It's good to see others exploring different types of audio - please post more - bullethead 07:39:34 07/19/18 (0)
  • RE: went shopping today - bare 10:11:49 07/06/18 (7)
    • RE: went shopping today - bullethead 11:51:10 07/06/18 (0)
    • RE: went shopping today - Ugly 11:43:01 07/06/18 (5)
      • RE: went shopping today - bullethead 11:48:48 07/06/18 (4)
        • RE: went shopping today - Ugly 17:26:20 07/07/18 (3)
          • RE: went shopping today - bullethead 05:23:29 07/08/18 (2)
            • RE: went shopping today - Ugly 11:19:54 07/08/18 (1)
              • RE: went shopping today - bullethead 14:13:45 07/08/18 (0)
  • Long term unemployment - E-Stat 16:57:32 07/05/18 (3)
    • RE: Long term unemployment - bullethead 17:29:36 07/05/18 (2)
      • RE: Long term unemployment - Utley1 20:39:40 07/05/18 (1)
        • Rbullethead seems more the Australia type. just costs more to get there. - toothpaste 08:14:38 07/10/18 (0)
• Older tube barrier strip to new large spades - how? - theaudiohiffle 08:27:17 07/04/18 (11)
  • RE: Older tube barrier strip to new large spades - how? - Duster 14:15:47 07/06/18 (0)
  • RE: Older tube barrier strip to new large spades - how? - olddog828@gmail.com 04:05:34 07/05/18 (2)
    • RE: Older tube barrier strip to new large spades - how? - svisner 19:00:39 07/06/18 (1)
      • RE: Older tube barrier strip to new large spades - how? - Tidycat1 21:49:04 07/06/18 (0)
  • If all else fails... - kootenay 11:44:45 07/04/18 (0)
  • I just put one leg of the spade under the screw and tighten it down. nt - viridian 11:10:11 07/04/18 (0)
  • Which? - Awe-d-o-file 10:42:59 07/04/18 (0)
  • RE: Older tube barrier strip to new large spades - how? - svisner 08:47:56 07/04/18 (3)
    • RE: Older tube barrier strip to new large spades - how? - theaudiohiffle 10:32:38 07/07/18 (1)
      • RE: Older tube barrier strip to new large spades - how? - fredtr 10:02:04 07/08/18 (0)
    • RE: Older tube barrier strip to new large spades - how? - svisner 07:06:56 07/05/18 (0)
• Help please, 60hz hum and preamp issue - sgdouglas@dccnet.com 19:02:20 07/03/18 (12)
  • RE: Help please, 60hz hum and preamp issue - fredtr 09:37:31 07/09/18 (0)
  • RE: Help please, 60hz hum and preamp issue - airtime 06:31:31 07/04/18 (0)
  • RE: Help please, 60hz hum and preamp issue - sgdouglas@dccnet.com 20:45:20 07/03/18 (0)
  • RE: Help please, 60hz hum and preamp issue - Rod M 20:00:58 07/03/18 (0)
  • RE: Help please, 60hz hum and preamp issue - sgdouglas@dccnet.com 19:40:37 07/03/18 (1)
    • "My volume starts up from 0 to 1 then it wont increase anymore." - FenderLover 20:27:30 07/03/18 (0)
  • Have you checked the wiring at all in the AC duplex? - toothpaste 19:31:36 07/03/18 (2)
    • crazy people who do their on wiring - neolith 06:46:13 07/04/18 (1)
      • RE: crazy people who do their on wiring - airtime 15:15:16 07/04/18 (0)
  • RE: Help please, 60hz hum and preamp issue - airtime 19:06:00 07/03/18 (2)
    • RE: Help please, 60hz hum and preamp issue - sgdouglas@dccnet.com 19:10:28 07/03/18 (1)
      • RE: Help please, 60hz hum and preamp issue - Steve. 07:16:11 07/04/18 (0)
• SE Class A Mosfet amp - deathtube 667 07:04:24 07/01/18 (15)
  • RE: SE Class A Mosfet amp - Caucasian Blackplate 11:45:46 07/02/18 (5)
    • RE: SE Class A Mosfet amp - deathtube 667 12:25:45 07/02/18 (4)
      • RE: SE Class A Mosfet amp - Caucasian Blackplate 13:40:17 07/02/18 (3)
        • RE: heatsink specifications ... - deathtube 667 19:30:24 07/02/18 (2)
          • RE: heatsink specifications ... - Caucasian Blackplate 19:39:20 07/02/18 (1)
            • RE: heatsink experiments ... photo - deathtube 667 05:08:45 07/04/18 (0)
  • RE: SE Class A Mosfet amp - hahax@verizon.net 20:26:58 07/01/18 (6)
    • RE: SE Class A Mosfet amp - deathtube 667 07:06:51 07/02/18 (5)
      • RE: SE Class A Mosfet amp - hahax@verizon.net 20:37:08 07/02/18 (0)
      • RE: SE Class A Mosfet amp - airtime 09:17:16 07/02/18 (3)
        • RE: SE Class A Mosfet amp - deathtube 667 09:34:08 07/02/18 (2)
          • Really !!? You bought Ebay Crappy clone ACA boards - bare 19:06:49 07/03/18 (1)
            • RE:official ACA boards - sold out - deathtube 667 04:55:53 07/04/18 (0)
  • I like. - jusbe 17:04:59 07/01/18 (0)
  • RE: SE Class A Mosfet amp - svisner 11:05:30 07/01/18 (0)
• Amp powers up but no sound. - bob24 18:50:35 06/29/18 (25)
  • RE: Amp powers up but no sound. - bobwire 12:00:48 07/02/18 (1)
    • RE: Amp powers up but no sound. - bob24 12:26:02 07/08/18 (0)
  • RE: Amp powers up but no sound. - docw 20:14:21 06/30/18 (0)
  • Do you have another pre amp?... - kootenay 14:04:14 06/30/18 (3)
    • RE: Do you have another pre amp?... - bob24 14:27:59 06/30/18 (2)
      • RE: Do you have another pre amp?... - ahendler 14:35:23 06/30/18 (1)
        • RE: Do you have another pre amp?... - bob24 15:01:57 06/30/18 (0)
  • RE: Amp powers up but no sound. - cdb 11:44:42 06/30/18 (2)
    • RE: Amp powers up but no sound. - bob24 13:47:23 06/30/18 (1)
      • RE: Amp powers up but no sound. - Crazy Dave 06:25:48 07/02/18 (0)
  • RE: Amp powers up but no sound. - Palustris 09:23:06 06/30/18 (1)
    • RE: Amp powers up but no sound. - bob24 09:56:16 06/30/18 (0)
  • RE: Amp powers up but no sound. - neolith 09:19:27 06/30/18 (2)
    • RE: Amp powers up but no sound. - bob24 10:35:06 06/30/18 (1)
      • RE: Amp powers up but no sound. - JURB 11:42:08 06/30/18 (0)
  • RE: Amp powers up but no sound. - Dave B 07:18:10 06/30/18 (3)
    • RE: Amp powers up but no sound. - bob24 08:04:28 06/30/18 (2)
      • RE: Amp powers up but no sound. - Dave B 21:50:13 06/30/18 (1)
        • RE: Amp powers up but no sound. - bob24 09:19:48 07/01/18 (0)
  • In fifty years of experience. The vastly most likely problem is some switch.. - toothpaste 05:46:38 06/30/18 (3)
    • RE: In fifty years of experience. The vastly most likely problem is some switch.. - bob24 06:42:00 06/30/18 (2)
      • I still say you have to do it over. Again, it is most likely a wrong connection or switch. just looking? not - toothpaste 06:53:49 06/30/18 (1)
        • RE: I still say you have to do it over. Again, it is most likely a wrong connection or switch. just looking? not - bob24 07:40:09 06/30/18 (0)
  • Mute button? (n/t) - FenderLover 19:29:37 06/29/18 (1)
    • RE: Mute button? (n/t) - bob24 22:05:27 06/29/18 (0)
• Nord Two Ice Power SE - HiOnFi 05:01:25 06/29/18 (17)
  • RE: Nord Two Ice Power SE - HiOnFi 07:52:08 07/01/18 (0)
  • RE: Nord Two Ice Power SE - George47 09:54:02 06/30/18 (3)
    • RE: Nord Two Ice Power SE - HiOnFi 10:42:13 06/30/18 (2)
      • RE: Nord Two Ice Power SE - George47 02:33:30 07/02/18 (1)
        • RE: Nord Two Ice Power SE - HiOnFi 03:56:51 07/02/18 (0)
  • RE: Nord Two Ice Power SE - Mick Wolfe 10:02:51 06/29/18 (0)
  • RE: Nord Two Ice Power SE - bullethead 05:10:22 06/29/18 (10)
    • RE: Nord Two Ice Power SE - Ric Schultz 11:43:22 06/29/18 (0)
    • RE: Nord Two Ice Power SE - HiOnFi 05:30:16 06/29/18 (8)
      • RE: Nord Two Ice Power SE - Ric Schultz 11:56:03 06/29/18 (3)
        • RE: Nord Two Ice Power SE - HiOnFi 09:52:00 06/30/18 (0)
        • RE: Nord Two Ice Power SE - HiOnFi 05:25:37 06/30/18 (0)
        • RE: Nord Two Ice Power SE - Ugly 19:07:42 06/29/18 (0)
      • RE: Nord Two Ice Power SE - bullethead 05:32:57 06/29/18 (3)
        • RE: Nord Two Ice Power SE - stereo5 17:24:08 06/29/18 (1)
          • Hypex Ncore, ICE - bullethead 20:32:36 07/04/18 (0)
        • RE: Nord Two Ice Power SE - HiOnFi 06:20:11 06/29/18 (0)
• Look! - Fake DartZeel NHB-108 made in China - mjcmt 14:53:52 06/27/18 (26)
  • If I had deep pockets I's buy one for laughs ... - Feanor 08:36:47 06/28/18 (6)
    • This guy bought one and - RGA 03:12:20 07/03/18 (1)
      • The Chinese can make stuff to any level of quality they want - Feanor 11:25:26 07/04/18 (0)
    • RE: If I had deep pockets I's buy one for laughs ... - Greg Cz 11:55:58 06/28/18 (3)
      • RE: If I had deep pockets I's buy one for laughs ... - Crazy Dave 07:27:54 06/29/18 (2)
        • RE: If I had deep pockets I's buy one for laughs ... - Greg Cz 10:48:42 06/29/18 (1)
          • RE: If I had deep pockets I's buy one for laughs ... - Crazy Dave 13:54:23 06/29/18 (0)
  • No need to order from China... - viridian 08:01:03 06/28/18 (8)
    • RE: No need to order from China... - Dave_K 16:27:16 06/28/18 (0)
    • RE: No need to order from China... - Caucasian Blackplate 13:47:05 06/28/18 (6)
      • Shocking!!! nt - viridian 21:08:35 06/28/18 (5)
        • RE: Shocking!!! nt - Caucasian Blackplate 21:25:35 06/28/18 (4)
          • You mean the real DartZeel amp. Yes silly. nt - viridian 19:51:13 06/30/18 (0)
          • Certainly is.. - bare 09:11:36 06/30/18 (2)
            • RE: Certainly is.. - SpotcheckBilly12345 09:41:34 07/01/18 (1)
              • RE: Certainly is.. - RGA 20:06:15 07/03/18 (0)
  • RE: Look! - Fake DartZeel NHB-108 made in China - Dave_K 04:11:24 06/28/18 (7)
    • RE: Look! - Fake DartZeel NHB-108 made in China - Wojciech 06:33:45 06/28/18 (4)
      • Sure, that's what they want you to think - Dave_K 16:20:28 06/28/18 (1)
        • RE: Sure, that's what they want you to think - Wojciech 10:03:54 06/29/18 (0)
      • Exactly !! - TeddiJackEddie 08:16:20 06/28/18 (1)
        • John Marks gave the NHB-108 its first exposure in Stereophile - John Marks 15:44:20 06/28/18 (0)
    • RE: Look! - Fake DartZeel NHB-108 made in China - mjcmt 04:48:06 06/28/18 (1)
      • RE: Look! - Fake DartZeel NHB-108 made in China - PAR 05:27:17 06/28/18 (0)
  • Will look good on Instagram . . . all that matters. * - Billy Wonka 20:06:31 06/27/18 (0)
  • I'll take 10! - Barry 15:23:01 06/27/18 (0)
• Heathkit aa-14 - left channel scratchy from headphone use - Elguapo511 15:29:09 06/26/18 (21)
  • RE: Heathkit aa-14 - left channel scratchy from headphone use - kenzo 19:32:03 06/26/18 (2)
    • RE: Heathkit aa-14 - left channel scratchy from headphone use - Elguapo511 06:07:45 06/29/18 (0)
    • RE: Heathkit aa-14 - left channel scratchy from headphone use - Elguapo511 07:02:51 06/27/18 (0)
  • RE: Heathkit aa-14 - left channel scratchy from headphone use - Caucasian Blackplate 16:23:11 06/26/18 (3)
    • RE: Heathkit aa-14 - left channel scratchy from headphone use - Elguapo511 10:01:23 07/07/18 (1)
      • RE: Heathkit aa-14 - left channel scratchy from headphone use - Caucasian Blackplate 10:04:32 07/07/18 (0)
    • RE: Heathkit aa-14 - left channel scratchy from headphone use - Elguapo511 09:56:50 07/07/18 (0)
  • RE: Heathkit aa-14 - left channel scratchy from headphone use - Elguapo511 15:30:01 06/26/18 (13)
    • RE: Heathkit aa-14 - left channel scratchy from headphone use - Elguapo511 15:31:15 06/26/18 (12)
      • RE: Heathkit aa-14 - left channel scratchy from headphone use - Elguapo511 15:32:08 06/26/18 (11)
        • RE: Heathkit aa-14 - left channel scratchy from headphone use - Elguapo511 15:33:32 06/26/18 (10)
          • RE: Heathkit aa-14 - left channel scratchy from headphone use - Elguapo511 15:44:19 06/26/18 (9)
            • You did not blow a resistor. You blew a transistor or two (or 3 or 4) nt - toothpaste 15:47:15 06/26/18 (8)
              • RE: You did not blow a resistor. You blew a transistor or two (or 3 or 4) nt - Elguapo511 15:55:53 06/26/18 (7)
                • RE: You did not blow a resistor. You blew a transistor or two (or 3 or 4) nt - Elguapo511 19:07:40 06/26/18 (0)
                • RE: You did not blow a resistor. You blew a transistor or two (or 3 or 4) nt - Elguapo511 16:11:42 06/26/18 (3)
                  • RE: You did not blow a resistor. You blew a transistor or two (or 3 or 4) nt - Caucasian Blackplate 16:26:54 06/26/18 (2)
                    • RE: You did not blow a resistor. You blew a transistor or two (or 3 or 4) nt - Elguapo511 14:27:25 07/06/18 (1)
                      • RE: You did not blow a resistor. You blew a transistor or two (or 3 or 4) nt - Caucasian Blackplate 08:30:52 07/07/18 (0)
                • RE: You did not blow a resistor. You blew a transistor or two (or 3 or 4) nt - Davey 16:02:23 06/26/18 (1)
                  • RE: You did not blow a resistor. You blew a transistor or two (or 3 or 4) nt - Elguapo511 19:10:21 06/26/18 (0)
• Has anyone used the NuPrime IDA-8 integrated amp? - mjcmt 14:43:21 06/19/18 (13)
  • RE: Has anyone used the NuPrime IDA-8 integrated amp? - Mr Peabody 14:55:37 06/28/18 (4)
    • RE: Has anyone used the NuPrime IDA-8 integrated amp? - mjcmt 15:08:13 06/28/18 (3)
      • RE: Has anyone used the NuPrime IDA-8 integrated amp? - Mr Peabody 16:54:42 06/28/18 (2)
        • RE: Has anyone used the NuPrime IDA-8 integrated amp? - mjcmt 17:02:52 06/28/18 (1)
          • RE: Has anyone used the NuPrime IDA-8 integrated amp? - Mr Peabody 19:26:17 06/28/18 (0)
  • RE: Has anyone used the NuPrime IDA-8 integrated amp? - Postal Grunt 20:45:40 06/26/18 (0)
  • RE: Has anyone used the NuPrime IDA-8 integrated amp? - Les Anderson 17:45:16 06/22/18 (1)
    • RE: Has anyone used the NuPrime IDA-8 integrated amp? - mjcmt 04:33:13 06/23/18 (0)
  • RE: Has anyone used the NuPrime IDA-8 integrated amp? - sed 14:17:44 06/22/18 (0)
  • RE: Has anyone used the NuPrime IDA-8 integrated amp? - HighEndWire 11:26:25 06/22/18 (0)
  • RE: Has anyone used the NuPrime IDA-8 integrated amp? - AbeCollins 09:28:33 06/21/18 (2)
    • RE: Has anyone used the NuPrime IDA-8 integrated amp? - mjcmt 10:24:42 06/21/18 (1)
      • RE: Has anyone used the NuPrime IDA-8 integrated amp? - AbeCollins 11:25:25 06/21/18 (0)
• Rega Elex or Naim Nait - Bill the K 09:13:24 06/19/18 (24)
  • It depends on what he wants the Harbeths to do. - ppopp 08:14:45 06/25/18 (0)
  • RE: Rega Elex or Naim Nait...also consider LFD - Felix W 07:10:37 06/21/18 (0)
  • I'd pick a Rega... - kuma 13:00:19 06/20/18 (0)
  • Being a Naim guy... - viridian 14:18:33 06/19/18 (20)
    • RE: Being a Naim guy... - Wojciech 18:57:41 06/19/18 (5)
      • On which planet is this happening? - ppopp 08:17:19 06/25/18 (0)
      • RE: Being a Naim guy... - John-from Seattle 19:46:23 06/19/18 (2)
        • RE: Being a Naim guy... - Wojciech 20:18:53 06/19/18 (1)
          • RE: Being a Naim guy... - Wojciech 20:37:01 06/19/18 (0)
      • Interesting ,but not my experience at all.. - viridian 19:22:29 06/19/18 (0)
    • RE: Being a Naim guy... - Bill the K 18:28:50 06/19/18 (13)
      • There are a few folks on the Naim Forum.... - viridian 19:35:28 06/19/18 (12)
        • RE: There are a few folks on the Naim Forum.... - Bill the K 10:22:19 06/20/18 (1)
          • You would just sully his pure reactions with your audiophile claptrap anyway. nt - viridian 15:35:27 06/20/18 (0)
        • Having used Linn with - Atwood 05:57:51 06/20/18 (0)
        • RE: There are a few folks on the Naim Forum.... - PAR 00:30:37 06/20/18 (8)
          • Doesnt your mate Alan Shaw say... - viridian 15:33:54 06/20/18 (6)
            • RE: Doesnt your mate Alan Shaw say... - PAR 16:21:54 06/20/18 (5)
              • +4 -nt - E-Stat 10:22:05 06/23/18 (0)
              • Exactly---NT - lancelot 08:41:57 06/21/18 (0)
              • "forming a wonderful partnership" - 1973shovel 07:56:37 06/21/18 (1)
                • RE: "forming a wonderful partnership" - Crazy Dave 06:58:46 06/22/18 (0)
              • Great post. I was just having a bit of fun. nt - viridian 18:03:41 06/20/18 (0)
          • RE: There are a few folks on the Naim Forum.... - Crazy Dave 06:55:31 06/20/18 (0)
• Recommendations for budget solid state preamp with BIG soundstage - Reverend Bob LaBlaugh 08:54:58 06/19/18 (22)
  • Audio Research LS9, (successor to LS3) - Feanor 11:16:06 06/27/18 (1)
    • I'd agree, but prefer the LS3 - David S. 07:09:27 06/28/18 (0)
  • RE: Recommendations for budget solid state preamp with BIG soundstage - KanedaK 01:12:52 06/27/18 (0)
  • RE: Recommendations for budget solid state preamp with BIG soundstage - kenzo 19:34:58 06/26/18 (0)
  • RE: Recommendations for budget solid state preamp with BIG soundstage - Greg Cz 04:31:31 06/24/18 (2)
    • RE: Recommendations for budget solid state preamp with BIG soundstage - Reverend Bob LaBlaugh 05:43:43 06/24/18 (1)
      • RE: Recommendations for budget solid state preamp with BIG soundstage - Rockethead26 08:49:39 06/24/18 (0)
  • RE: Recommendations for budget solid state preamp with BIG soundstage - Bruce from DC 07:09:13 06/22/18 (3)
    • RE: Recommendations for budget solid state preamp with BIG soundstage - Reverend Bob LaBlaugh 09:40:05 06/22/18 (0)
    • RE: Recommendations for budget solid state preamp with BIG soundstage - SpotcheckBilly12345 08:14:35 06/22/18 (1)
      • RE: Recommendations for budget solid state preamp with BIG soundstage - Utley1 12:42:39 06/23/18 (0)
  • Really !?? - bare 21:08:01 06/19/18 (1)
    • RE: Really !?? - Reverend Bob LaBlaugh 21:17:41 06/19/18 (0)
  • RE: Recommendations for budget solid state preamp with BIG soundstage - docw 15:48:58 06/19/18 (2)
    • RE: Recommendations for budget solid state preamp with BIG soundstage - Tidycat1 21:12:00 06/19/18 (1)
      • I'm using a CJ and they make a great preamp - airtime 12:39:20 06/20/18 (0)
  • RE: Recommendations for budget solid state preamp with BIG soundstage - Sondek 11:10:50 06/19/18 (1)
    • RE: Recommendations for budget solid state preamp with BIG soundstage - Reverend Bob LaBlaugh 05:26:18 06/20/18 (0)
  • RE: Recommendations for budget solid state preamp with BIG soundstage - 6bq5 10:21:03 06/19/18 (1)
    • RE: Recommendations for budget solid state preamp with BIG soundstage - Reverend Bob LaBlaugh 10:33:41 06/19/18 (0)
  • RE: Recommendations for budget solid state preamp with BIG soundstage - G Squared 09:20:14 06/19/18 (1)
    • RE: Recommendations for budget solid state preamp with BIG soundstage - Reverend Bob LaBlaugh 10:20:23 06/19/18 (0)
• Late 1970's 3 piece John Curl designed preamp? - Sean 08:17:37 06/18/18 (12)
  • RE: Late 1970's 3 piece John Curl designed preamp? - CG 18:17:05 06/18/18 (1)
    • RE: Late 1970's 3 piece John Curl designed preamp? - Sean 09:03:38 06/19/18 (0)
  • Denneson JC-80 - E-Stat 09:00:46 06/18/18 (7)
    • RE: Denneson JC-80 - Sean 12:57:29 06/18/18 (6)
      • RE: Dennesen JC-80 - E-Stat 15:38:30 06/18/18 (5)
        • HP's Listening room - acres verde 12:31:25 06/19/18 (3)
          • RE: HP's Listening room - E-Stat 14:00:08 06/19/18 (1)
            • What, no cinder blocks? - Ozzie 18:57:58 06/24/18 (0)
          • RE: HP had Infinity IRS - M3 lover 13:19:03 06/19/18 (0)
        • Great photo. Thanks. nt - G Squared 05:28:57 06/19/18 (0)
  • Vendetta Research? nt - toothpaste 08:23:24 06/18/18 (1)
    • AFAIK that was a phono stage only. - Rick W 08:52:42 06/18/18 (0)
• It took 8 years but I finally got the NAD C275BEE setup where I like it - airtime 13:38:01 06/15/18 (6)
  • RE: It took 8 years but I finally got the NAD C275BEE setup where I like it - BillH 14:50:20 06/22/18 (0)
  • Did you have to swap the +/- terminals at the back of the NAD? - jeromelang 10:34:16 06/22/18 (0)
  • RE: It took 8 years but I finally got the NAD C275BEE setup where I like it - bare 16:59:57 06/15/18 (3)
    • You could be right - airtime 17:43:12 06/15/18 (2)
      • RE: You could be right - FenderLover 17:55:48 06/15/18 (1)
        • RE: You could be right - John Elison 20:53:32 06/15/18 (0)
• Shindo Aurieges L Mains Voltage - mmhifi 11:20:45 06/15/18 (3)
  • RE: Shindo Aurieges L Mains Voltage - Des 15:45:56 06/17/18 (0)
  • RE: Shindo Aurieges L Mains Voltage - PAR 16:25:29 06/16/18 (0)
  • RE: Shindo Aurieges L Mains Voltage - Wojciech 19:22:51 06/15/18 (0)
• DNM PA 1 - Wojciech 17:33:19 06/14/18 (0)
• Parasound Vs Ayre - hebaton 08:10:48 06/14/18 (3)
  • Tough choice between two of my favorite SS designers... - Ivan303 09:06:07 06/19/18 (0)
  • I have compared them... - kootenay 11:50:17 06/14/18 (0)
  • My choice was to... - Shep 09:03:44 06/14/18 (0)
• Sugden ANV-50 (Available 9/2018) - chocolate_lover9999@yahoo.com 17:24:36 06/13/18 (11)
  • RE: Sugden ANV-50 (Available 9/2018) - jperry 12:31:29 06/15/18 (1)
    • RE: Sugden ANV-50 (Available 9/2018) - akolegov 01:45:03 06/26/18 (0)
  • Looks Interesting to Me - Sibelius 06:53:50 06/14/18 (4)
    • So is it really a full Class A amp? - Feanor 07:55:02 06/14/18 (3)
      • RE: So is it really a full Class A amp? - cawson@onetel.com 15:40:29 06/20/18 (0)
      • Yeah, That Description is a Bit of Technobabble... - Sibelius 08:42:08 06/16/18 (1)
        • RE: Yeah, That Description is a Bit of Technobabble... - Wojciech 19:34:33 06/18/18 (0)
  • Sales rep? - bare 18:38:31 06/13/18 (3)
    • Not so fast, Bucky. - ppopp 08:08:31 06/19/18 (1)
      • RE: Not so fast, Bucky. - cawson@onetel.com 15:43:16 06/20/18 (0)
    • RE: Sales rep? - chocolate_lover9999@yahoo.com 10:32:24 06/15/18 (0)
• Rotel HT receiver dropping sound from smart TV on streaming services - kvk 10:36:25 06/13/18 (2)
  • RE: Rotel HT receiver dropping sound from smart TV on streaming services - kvk 05:36:23 12/20/21 (0)
  • RE: Rotel HT receiver dropping sound from smart TV on streaming services - 6bq5 14:07:30 06/13/18 (0)
• Choice between Manley and Parasound - hebaton 05:43:56 06/13/18 (9)
  • RE: Choice between Manley and Parasound - Steve. 19:31:27 06/25/18 (0)
  • ARE your speakers up to the task ? - bare 17:02:23 06/15/18 (0)
  • RE: Choice between Manley and Parasound - hebaton 14:06:18 06/13/18 (0)
  • RE: Choice between Manley and Parasound - marlin 10:35:33 06/13/18 (0)
  • RE: Choice between Manley and Parasound - Inmate51 09:31:01 06/13/18 (2)
    • RE: Choice between Manley and Parasound - hebaton 09:56:53 06/13/18 (1)
      • I might be a dissenter, but never liked Classe with B&W - David S. 15:24:13 06/13/18 (0)
  • RE: Choice between Manley and Parasound - Caucasian Blackplate 07:57:23 06/13/18 (1)
    • RE: Choice between Manley and Parasound - hebaton 08:27:05 06/13/18 (0)
• Parasound A23 or McIntosh MC7100. - Mcmann57 11:56:39 06/12/18 (17)
  • Why not get a Parasound A 21? - Inmate51 08:12:53 07/05/18 (1)
    • RE: Why not get a Parasound A 21? - Mcmann57 09:23:07 07/05/18 (0)
  • RE: Parasound A23 or McIntosh MC7100. - A.Wayne 20:52:07 07/04/18 (0)
  • RE: Parasound A23 or McIntosh MC7100. - Mcmann57 16:18:34 06/14/18 (2)
    • McIntosh MC7100 w/ bananas - mjcmt 13:44:30 07/04/18 (0)
    • You couldn't go wrong with either - airtime 19:54:26 06/14/18 (0)
  • RE: Parasound A23 or McIntosh MC7100. - Mcmann57 11:02:42 06/13/18 (1)
    • RE: Parasound A23 or McIntosh MC7100. - airtime 12:36:58 06/13/18 (0)
  • RE: Parasound A23 or McIntosh MC7100. - Mr Peabody 20:18:23 06/12/18 (0)
  • RE: Parasound A23 or McIntosh MC7100. - airtime 18:18:02 06/12/18 (2)
    • RE: Parasound A23 or McIntosh MC7100. - Mcmann57 18:27:23 06/12/18 (1)
      • RE: Parasound A23 or McIntosh MC7100. - Dave_K 08:15:43 06/13/18 (0)
  • On the other hand. The Mac will hold it value forever. forever. - toothpaste 16:33:39 06/12/18 (1)
    • I don't agree - Dave_K 07:58:34 06/13/18 (0)
  • If the Mac still has the original caps, diodes, etc, go with the Parasound. - Opus 33 1/3 15:48:21 06/12/18 (0)
  • RE: Parasound A23 or McIntosh MC7100. - pictureguy 14:23:48 06/12/18 (1)
    • RE: Parasound A23 or McIntosh MC7100. - Mcmann57 17:21:00 06/12/18 (0)
• Cary SLP-05 fuses - Jay Buridan 10:01:26 06/12/18 (0)
• Any Hattor Passive Preamp Owners? - HiOnFi 10:29:30 06/11/18 (10)
  • Looks like a nice quality smaller setup - airtime 11:16:21 06/12/18 (0)
  • No.. - bare 18:40:31 06/11/18 (1)
    • Yes - Awe-d-o-file 15:27:29 06/12/18 (0)
  • I like the shocks on that Mercedes. Nt - viridian 12:12:42 06/11/18 (4)
    • RE: I like the shocks on that Mercedes. Nt - HiOnFi 13:55:38 06/11/18 (0)
    • RE: I like the shocks on that Mercedes. Nt - HiOnFi 12:29:34 06/11/18 (2)
      • You mean another level vertically, I take it. nt - viridian 06:30:02 06/12/18 (1)
        • RE: You mean another level vertically, I take it. nt - HiOnFi 06:58:40 06/12/18 (0)
  • RE: Any Hattor Passive Preamp Owners? - Ozzy 12:00:23 06/11/18 (1)
    • RE: Any Hattor Passive Preamp Owners? - HiOnFi 06:55:52 06/15/18 (0)
• Can a GROUND LOOP be formed by 2 pathways for output/input grounds? - Heifetz 00:57:43 06/10/18 (15)
  • RE: Can a GROUND LOOP be formed by 2 pathways for output/input grounds? - gordguide 13:34:40 06/30/18 (0)
  • Should the signal wires be twisted from RCa jacks as in picture? - Heifetz 15:44:55 06/10/18 (2)
    • Internal short runs (not twisted pairs) Not too critical - toothpaste 11:16:13 06/19/18 (0)
    • RE: Should the signal wires be twisted from RCa jacks as in picture? - FenderLover 20:33:40 06/10/18 (0)
  • RE: Can a GROUND LOOP be formed by 2 pathways for output/input grounds? - Awe-d-o-file 14:32:17 06/10/18 (0)
  • RE: Can a GROUND LOOP be formed by 2 pathways for output/input grounds? - Palustris 08:21:59 06/10/18 (8)
    • RE: Can a GROUND LOOP be formed by 2 pathways for output/input grounds? - Heifetz 14:19:41 06/10/18 (7)
      • RE: Can a GROUND LOOP be formed by 2 pathways for output/input grounds? - Palustris 06:07:19 06/11/18 (6)
        • RE: Can a GROUND LOOP be formed by 2 pathways for output/input grounds? - Heifetz 13:13:16 06/11/18 (5)
          • RE: Can a GROUND LOOP be formed by 2 pathways for output/input grounds? - Palustris 08:01:52 06/12/18 (4)
            • May be a rebuild is the solution - Heifetz 13:33:47 06/12/18 (3)
              • RE: May be a rebuild is the solution - Palustris 13:58:09 06/12/18 (2)
                • RE: May be a rebuild is the solution - Heifetz 16:26:02 06/13/18 (1)
                  • RE: May be a rebuild is the solution - Palustris 07:38:03 06/14/18 (0)
  • If you have more than one point... - FenderLover 07:45:26 06/10/18 (0)
• why my blue alps pot has no input wires? - Heifetz 14:37:26 06/09/18 (7)
  • RE: why my blue alps pot has no input wires? - Victor Khomenko 15:55:00 06/09/18 (6)
    • RE: why my blue alps pot has no input wires? - Heifetz 18:42:23 06/09/18 (5)
      • RE: why my blue alps pot has no input wires? - Davey 19:15:45 06/09/18 (4)
        • RE: why my blue alps pot has no input wires? - Heifetz 22:54:38 06/09/18 (3)
          • RE: why my blue alps pot has no input wires? - Davey 06:59:21 06/10/18 (2)
            • RE: why my blue alps pot has no input wires? - Heifetz 15:13:00 06/10/18 (1)
              • RE: why my blue alps pot has no input wires? - Davey 20:18:01 06/11/18 (0)
• If You were A Swine Needing To Choose Between 3 Pre-amps - Mister Pig 07:16:59 06/09/18 (5)
  • RE: If You were A Swine Needing To Choose Between 3 Pre-amps - RGA 21:06:52 06/09/18 (0)
  • Useless input here... - musetap 10:44:27 06/09/18 (0)
  • RE: If You were A Swine Needing To Choose - bare 09:57:57 06/09/18 (2)
    • RE: If You were A Swine Needing To Choose - Mister Pig 10:47:37 06/09/18 (1)
      • Having been tempted to title my other post... - musetap 15:57:23 06/09/18 (0)
• Anyone have experience w/ NuForce DDA-120 amp? - mjcmt 16:53:52 06/05/18 (13)
  • RE: Anyone have experience w/ NuForce DDA-120 amp? - Prighello 14:16:51 06/17/18 (3)
    • RE: Anyone have experience w/ NuForce DDA-120 amp? - mjcmt 16:30:58 06/17/18 (2)
      • RE: Anyone have experience w/ NuForce DDA-120 amp? - Prighello 22:41:22 06/17/18 (1)
        • RE: Anyone have experience w/ NuForce DDA-120 amp? - mjcmt 14:09:10 06/18/18 (0)
  • RE: Anyone have experience w/ NuForce DDA-120 amp? - HiOnFi 08:08:20 06/10/18 (0)
  • Best Class D I heard was NuForce.... - AbeCollins 10:26:58 06/07/18 (1)
    • RE: Best Class D I heard was NuForce.... - slbenz 16:39:59 06/07/18 (0)
  • NuPrime is the old NuForce - DrChaos 14:37:33 06/06/18 (1)
    • RE: NuPrime is the old NuForce - mjcmt 16:57:13 06/16/18 (0)
  • RE: Anyone have experience w/ NuForce DDA-120 amp? - Les Anderson 18:21:48 06/05/18 (3)
    • Just wondering - Awe-d-o-file 07:58:06 06/06/18 (0)
    • RE: Anyone have experience w/ NuForce DDA-120 amp? - mjcmt 04:30:10 06/06/18 (1)
      • RE: Anyone have experience w/ NuForce DDA-120 amp? - Les Anderson 05:36:45 06/06/18 (0)
• To play single speaker - Bill the K 20:41:00 06/04/18 (5)
  • RE: To play single speaker - pictureguy 10:52:16 06/06/18 (0)
  • To play single speaker use one channel of the amp. leave other unused. nt - toothpaste 08:01:19 06/06/18 (0)
  • RE: To play single speaker - John-from Seattle 15:08:22 06/05/18 (0)
  • RE: To play single speaker - Hornlover 08:10:14 06/05/18 (0)
  • RE: To play single speaker - BPoletti 06:58:24 06/05/18 (0)
• Yamaha M-85 needs repair. Free to good home. - vacuous 17:27:26 06/04/18 (9)
  • Nice sounding amp... - kootenay 09:54:08 06/08/18 (2)
    • RE: Nice sounding amp... - slbenz 11:04:24 06/08/18 (1)
      • RE: Nice sounding amp... - kbuzz 08:44:39 08/21/18 (0)
  • RE: Yamaha M-85 needs repair. Free to good home. - used-hifi 08:45:09 06/08/18 (0)
  • Broken amp found a home. - vacuous 18:04:59 06/06/18 (2)
    • RE: Broken amp found a home. - Crazy Dave 07:00:07 06/08/18 (0)
    • RE: Broken amp found a home. - JURB 19:58:52 06/07/18 (0)
  • RE: Yamaha M-85 needs repair. Free to good home. - kff 18:11:59 06/04/18 (1)
    • RE: Yamaha M-85 needs repair. Free to good home. - Nagratech 09:17:35 06/05/18 (0)
• Single ended source and balanced connections - Steve RII 19:25:46 06/02/18 (4)
  • The signal will be fine. No problem. - toothpaste 06:59:21 06/03/18 (3)
    • RE: The signal will be fine. No problem. - neolith 07:33:37 06/03/18 (2)
      • RE: The signal will be fine. No problem. - Davey 08:11:31 06/03/18 (1)
        • RE: The signal will be fine. No problem. - Steve RII 12:22:43 06/03/18 (0)
• class d amplifier - markyboy156@outlook.com 08:34:55 06/02/18 (7)
  • this may be an option for you - mjcmt 17:30:02 06/05/18 (0)
  • RE: class d amplifier - svisner 07:40:37 06/03/18 (1)
    • RE: class d amplifier - scruffy_ 08:46:57 06/03/18 (0)
  • RE: class d amplifier - Frihed89 23:34:50 06/02/18 (0)
  • RE: class d amplifier - Caucasian Blackplate 14:03:41 06/02/18 (0)
  • class d amplifier - mkuller 11:27:59 06/02/18 (0)
  • RE: class d amplifier - scruffy_ 10:24:51 06/02/18 (0)
• Krell KSA 250 Amp.Guidance - denden11 08:04:04 05/31/18 (18)
  • RE: Krell KSA 250 Amp.Guidance - Mike B. 14:17:57 06/01/18 (0)
  • RE: Krell KSA 250 Amp.Guidance - jaynemo 05:43:51 06/01/18 (1)
    • RE: Krell KSA 250 Amp.Guidance - zelig 04:30:54 06/02/18 (0)
  • RE: Krell KSA 250 Amp.Guidance - Trouser Trout 19:39:13 05/31/18 (5)
    • RE: Krell KSA 250 Amp.Guidance - Crazy Dave 07:01:56 06/01/18 (4)
      • RE: Krell KSA 250 Amp.Guidance - jaynemo 09:02:06 06/01/18 (1)
        • RE: Krell KSA 250 Amp.Guidance - Crazy Dave 14:06:36 06/01/18 (0)
      • Agreed - airtime 07:25:45 06/01/18 (1)
        • RE: Agreed - Crazy Dave 14:10:11 06/01/18 (0)
  • Naive question - George S. Roland 18:50:24 05/31/18 (0)
  • RE: Krell KSA 250 Amp.Guidance - 6bq5 08:42:52 05/31/18 (7)
    • RE: Krell KSA 250 Amp.Guidance - denden11 10:18:28 05/31/18 (5)
      • RE: Krell KSA 250 Amp.Guidance - airtime 16:25:23 05/31/18 (3)
        • RE: Krell KSA 250 Amp.Guidance - Blackdog 18:33:07 05/31/18 (2)
          • RE: Krell KSA 250 Amp.Guidance - denden11 12:59:14 06/01/18 (1)
            • RE: Krell KSA 250 Amp.Guidance - airtime 18:14:23 06/01/18 (0)
      • RE: Krell KSA 250 Amp.Guidance - Caucasian Blackplate 13:41:44 05/31/18 (0)
    • A 27 year old amp that the manufacturer claimed ran fully class A, and you can't imagine any needed fixes? - David S. 10:15:27 05/31/18 (0)
• Vintage MASS ROWE amplifier need guidance - Surfingfreeman 18:15:55 05/25/18 (7)
  • RE: Vintage MASS ROWE amplifier need guidance - Rinascita musicale 22:42:20 05/31/18 (0)
  • RE: Vintage MASS ROWE amplifier need guidance - Cory M. 19:44:11 05/30/18 (0)
  • 60W mono - Awe-d-o-file 07:25:29 05/27/18 (1)
    • RE: 60W mono - Surfingfreeman 07:33:28 05/27/18 (0)
  • RE: Vintage MASS ROWE amplifier need guidance - Palustris 07:30:19 05/26/18 (0)
  • There is a pair of Latino 125 mono amps for sale in the Asylum Trader right now. nt - viridian 21:25:07 05/25/18 (0)
  • Is this for guitar amp use? - FenderLover 18:31:14 05/25/18 (0)
• My output Transformer pic -it looks sick- is it a problem? - Heifetz 00:26:00 05/23/18 (5)
  • RE: My output Transformer pic -it looks sick- is it a problem? - Heifetz 14:10:16 05/23/18 (1)
    • RE: My output Transformer pic -it looks sick- is it a problem? - triamp 00:55:53 05/25/18 (0)
  • RE: My output Transformer pic -it looks sick- is it a problem? - Caucasian Blackplate 09:12:20 05/23/18 (0)
  • RE: My output Transformer pic -it looks sick- is it a problem? - 6bq5 08:23:07 05/23/18 (0)
  • RE: My output Transformer pic -it looks sick- is it a problem? - airtime 06:53:31 05/23/18 (0)

Threads started on or before 4/30/07 are archived Here.
Threads started on or before 4/15/07 are archived Here.
Threads started on or before 3/31/07 are archived Here.
Threads started on or before 3/15/07 are archived Here.
Threads started on or before 2/28/07 are archived Here.

---

[ Top of Page ] [ Contact Us ] [ Support/Wish List ] [ Copyright © 2018, Audio Asylum, all rights reserved ] [ Take5 ]

---

[ General ] [ Speakers ] [ Tubes ] [ Vinyl ] [ Digital ] [ Hi-Rez ] [ Video Asylum ] [ Cables ] [ Tweaks/DIY ] [ Music ] [ Films ]

---