Amp/Preamp Asylum Looking for a new Amp or Preamp? If you're after tubes, post over here.

For Sale Ads FAQ / News / Events

AudioAsylum Trader Dayens Menuetto - Selling a 'new as demo' model Menuetto int... Krenum Krome SE 6L6/6V6 with 6SL7 driver Kustom made Krome chassis SE 6L6 + 6SL7 - PRICE REDUCED 150.00 on this very nice looking and...

• PS Audio Gain Cell DAC/ Preamp & S300 Amp - jaynemo 13:21:30 08/08/17 (3)
  • RE: PS Audio Gain Cell DAC/ Preamp & S300 Amp - JerryS 21:00:41 08/11/17 (0)
  • RE: PS Audio Gain Cell DAC/ Preamp & S300 Amp - tgibbs 21:11:46 08/08/17 (0)
  • RE: PS Audio Gain Cell DAC/ Preamp & S300 Amp - AbeCollins 15:05:28 08/08/17 (0)
• More tube rolling in the Freya - scruffy_ 20:09:30 08/03/17 (4)
  • RE: More tube rolling in the Freya - morricab 02:36:40 08/10/17 (0)
  • RE: More tube rolling in the Freya - AbeCollins 07:52:57 08/04/17 (2)
    • RE: More tube rolling in the Freya - Lou S 04:27:56 01/08/18 (0)
    • RE: More tube rolling in the Freya - scruffy_ 15:12:08 08/08/17 (0)
• Question about biasing ARC Ref 150se - FSonicSmith 15:27:01 08/02/17 (18)
  • RE: Question about biasing ARC Ref 150se - Palustris 09:39:57 08/03/17 (1)
    • RE: Question about biasing ARC Ref 150se - FSonicSmith 13:45:43 08/03/17 (0)
  • RE: Question about biasing ARC Ref 150se - AbeCollins 08:20:04 08/03/17 (0)
  • RE: Question about biasing ARC Ref 150se - fantja 06:11:30 08/03/17 (0)
  • RE: Question about biasing ARC Ref 150se - Mike B. 15:59:27 08/02/17 (13)
    • RE: Question about biasing ARC Ref 150se - neolith 15:12:12 08/03/17 (0)
    • It's very common with this type of issue is cause by bad tubes... - kootenay 16:36:24 08/02/17 (11)
      • RE: It's very common with this type of issue is cause by bad tubes... - Mike B. 13:51:00 08/03/17 (10)
        • Me too.... - kootenay 17:54:49 08/03/17 (9)
          • RE: Me too.... - mondial 04:46:45 08/04/17 (8)
            • RE: Me too.... - FSonicSmith 08:43:24 08/04/17 (6)
              • RE: Me too.... - Mike B. 09:27:28 08/04/17 (0)
              • Ok... fair enough... - kootenay 09:03:39 08/04/17 (4)
                • RE: Ok... fair enough... - FSonicSmith 09:09:31 08/04/17 (3)
                  • RE: Ok... fair enough... - fantja 16:05:46 08/07/17 (1)
                    • RE: Ok... fair enough... - FSonicSmith 09:15:46 08/08/17 (0)
                  • As far as I know... - kootenay 09:28:51 08/04/17 (0)
            • RE: Me too.... - kootenay 08:40:31 08/04/17 (0)
• SAE mk1b panel lamp info needed - dcal40@aol.com 19:46:54 08/01/17 (3)
  • RE: SAE mk1b panel lamp info needed - KanedaK 12:41:16 08/08/17 (0)
  • RE: SAE mk1b panel lamp info needed - llwhtt 09:53:44 08/02/17 (1)
    • RE: SAE mk1b panel lamp info needed - dcal40@aol.com 14:03:48 08/03/17 (0)
• TACT 2150 - fstein 17:36:40 07/31/17 (2)
  • RE: TACT 2150 - airtime 19:05:51 08/01/17 (1)
    • RE: TACT 2150 - fstein 07:07:02 08/02/17 (0)
• Cary SL-100 preamp: User comments welcomed - Alex F. 17:33:42 07/30/17 (7)
  • RE: Cary SL-100 preamp: User comments welcomed - mgbpuff 03:00:11 08/02/17 (1)
    • RE: Cary SL-100 preamp: User comments welcomed - Alex F. 12:03:22 08/02/17 (0)
  • RE: Cary SL-100 preamp: User comments welcomed - steve.ott@kctcs.edu 11:00:51 07/31/17 (3)
    • RE: Cary SL-100 preamp: User comments welcomed - Alex F. 15:06:47 07/31/17 (0)
    • I read that and thought how utterly ridiculous it was - airtime 13:27:26 07/31/17 (1)
      • RE: I read that and thought how utterly ridiculous it was - steve.ott@kctcs.edu 10:42:49 08/01/17 (0)
  • RE: Cary SL-100 preamp: User comments welcomed - Johnny R 05:16:42 07/31/17 (0)
• Quicksilver new Integrated Amp - gouldglen 10:33:43 07/30/17 (15)
  • RE: Quicksilver phono - M3 lover 11:24:13 08/02/17 (1)
    • RE: Quicksilver phono - Steve. 19:05:28 08/07/17 (0)
  • RE: Quicksilver new Integrated Amp - Johnny R 05:56:22 08/01/17 (4)
    • RE: Quicksilver new Integrated Amp - BCR 08:44:54 08/01/17 (3)
      • RE: Quicksilver new Integrated Amp - Johnny R 06:35:05 08/10/17 (2)
        • RE: Quicksilver new Integrated Amp - BCR 06:48:20 08/10/17 (1)
          • RE: Quicksilver new Integrated Amp - Johnny R 19:56:04 08/10/17 (0)
  • RE: Quicksilver new Integrated Amp - DrN 17:15:22 07/31/17 (0)
  • Have you considered the Rogue Cronus Magnum II ? - AbeCollins 14:29:31 07/31/17 (2)
    • RE: Have you considered the Rogue Cronus Magnum II ? - FSonicSmith 19:23:39 08/01/17 (1)
      • RE: Have you considered the Rogue Cronus Magnum II ? - AbeCollins 19:59:08 08/01/17 (0)
  • RE: Quicksilver new Integrated Amp - Caucasian Blackplate 16:38:03 07/30/17 (0)
  • Apparently no phono section. - Rick W 12:15:08 07/30/17 (2)
    • RE: Apparently no phono section. - Mike K 08:14:42 07/31/17 (1)
      • RE: Apparently no phono section. - Tre' 09:43:55 07/31/17 (0)
• Help finding a receiver - M3 lover 09:26:45 07/29/17 (16)
  • RE: Help finding a receiver - fantja 14:45:16 08/14/17 (0)
  • Thanks all, receiver ordered - M3 lover 10:30:14 08/13/17 (1)
    • RE: Thanks all, receiver ordered - Kingshead 12:35:39 08/13/17 (0)
  • RE: Help finding a receiver - Fat Point Jack 17:53:31 08/12/17 (0)
  • a receiver - hifitommy 17:36:44 08/09/17 (2)
    • RE: a receiver - triamp 00:45:57 08/12/17 (1)
      • my bad nt - hifitommy 18:31:39 08/13/17 (0)
  • Only an integrated, but it gave good results for me . . . - alaskahiatt 19:35:02 08/01/17 (0)
  • Resolved - M3 lover 09:56:10 07/31/17 (0)
  • Surprised no one had mentioned vintage gear - lactogenes 10:04:54 07/30/17 (0)
  • RE: Help finding a receiver - Kingshead 03:48:19 07/30/17 (0)
  • RE: Help finding a receiver - bigshow 18:33:27 07/29/17 (1)
    • RE: Help finding a receiver - triamp 00:11:45 07/30/17 (0)
  • RE: Help finding a receiver - triamp 16:00:35 07/29/17 (0)
  • Is she an outlaw? - G Squared 15:21:16 07/29/17 (0)
  • RE: Help finding a receiver - John Elison 14:02:15 07/29/17 (0)
• I apologize for not taking seriously the importance of power cords - airtime 19:29:29 07/28/17 (27)
  • No need to apologize - Mossback 10:48:38 08/10/17 (0)
  • RE: I apologize for not taking seriously the importance of power cords - pixelphoto 23:30:54 08/01/17 (1)
    • RE: I apologize for not taking seriously the importance of power cords - Duster 16:23:52 08/02/17 (0)
  • RE: I apologize for not taking seriously the importance of power cords - Rick58 22:58:28 07/31/17 (0)
  • RE: I apologize for not taking seriously the importance of power cords - Duster 17:39:13 07/30/17 (5)
    • Thank you - airtime 19:16:01 07/30/17 (4)
      • RE: Thank you - Duster 22:15:19 07/30/17 (3)
        • What's important? - M3 lover 10:00:22 07/31/17 (1)
          • RE: What's important? - Duster 16:27:37 08/05/17 (0)
        • RE: Thank you - Uncle Mike 03:25:42 07/31/17 (0)
  • Chinese made 'Puter cords.. - bare 08:16:13 07/30/17 (0)
  • Apology accepted. 40 lashes with a Pangea AC14. nt - viridian 19:58:11 07/29/17 (4)
    • RE: Apology accepted. 40 lashes with a Pangea AC14. nt - jhrlrd 22:14:56 07/29/17 (3)
      • You need to just replace that 60 miles of cable with something more ambitous.... - viridian 16:22:13 07/30/17 (2)
        • I like to contemplate the theory vs doing aspect of 60 miles vs 6 ft - 3+4=5 08:00:22 08/01/17 (1)
          • RE: I like to contemplate the theory vs doing aspect of 60 miles vs 6 ft - JURB 20:02:02 08/01/17 (0)
  • RE: I apologize for not taking seriously the importance of power cords - JURB 15:58:32 07/29/17 (1)
    • RE: I apologize for not taking seriously the importance of power cords - JonM 03:17:18 08/02/17 (0)
  • There may be limits to its magical powers... - musetap 20:36:55 07/28/17 (8)
    • There's no limit to the magic - Trouser Trout 23:02:18 07/28/17 (7)
      • Are you saying that your wife wants you over the falls in a barrel? - bjh 09:58:40 07/29/17 (1)
        • I am and... - Trouser Trout 22:19:22 07/29/17 (0)
      • How many ways and times have those electrons been re-used??? - 3+4=5 08:08:54 07/29/17 (1)
        • The thing about that water?... - musetap 09:47:28 07/29/17 (0)
      • RE: There's no limit to the magic - fantja 05:10:08 07/29/17 (2)
        • RE: There's no limit to the magic - AbeCollins 08:51:21 07/29/17 (1)
          • RE: There's no limit to the magic - fantja 10:48:33 07/29/17 (0)
• Amp/Balanced headphones - PAR 06:44:36 07/26/17 (7)
  • RE: Amp/Balanced headphones - SgreenP@MSN.com 06:23:19 07/27/17 (0)
  • RE: Amp/Balanced headphones - Caucasian Blackplate 16:26:07 07/26/17 (0)
  • Everything you ever wanted to know about balanced headphone cables ... - 13th Duke of Wymbourne 11:55:06 07/26/17 (0)
  • We do this a bit - Ralph 09:34:39 07/26/17 (3)
    • RE: We do this a bit - PAR 11:12:44 07/26/17 (2)
      • No! - Ralph 11:48:57 07/26/17 (1)
        • RE: No! - PAR 17:52:51 07/26/17 (0)
• cyrus PSX - 120 vs 240 - adaug 05:29:52 07/25/17 (8)
  • RE: cyrus PSX - 120 vs 240 - adaug 18:45:44 08/09/17 (0)
  • No! It says right in the manual that you linked.... - viridian 14:46:47 07/28/17 (4)
    • RE: No! It says right in the manual that you linked.... - adaug 06:10:34 07/29/17 (3)
      • Absolutely, I buy my gear based on how many outlets I have.... - viridian 16:25:30 07/30/17 (2)
        • RE: Absolutely, I buy my gear based on how many outlets I have.... - adaug 18:22:21 07/30/17 (1)
          • Guilty as well, and I have Naim gear so.......... - viridian 20:52:37 07/30/17 (0)
  • RE: cyrus PSX - 120 vs 240 - PAR 17:44:41 07/26/17 (1)
    • RE: cyrus PSX - 120 vs 240 - adaug 19:32:30 07/26/17 (0)
• Wright Sound WPP 200C vs 100C - gouldglen 13:23:40 07/24/17 (3)
  • RE: Wright Sound WPP 200C vs 100C - agattu 22:20:10 07/25/17 (2)
    • RE: Wright Sound WPP 200C vs 100C - gouldglen 08:34:15 07/26/17 (1)
      • RE: Wright Sound WPP 200C vs 100C - agattu 15:24:46 07/26/17 (0)
• SS amplifier for my 10 Ohm LS3/5A - Frihed89 14:05:05 07/23/17 (19)
  • RE: SS amplifier for my 10 Ohm LS3/5A - Mr Peabody 13:49:28 08/07/17 (0)
  • RE: SS amplifier for my 10 Ohm LS3/5A - Gator 14:14:35 08/03/17 (1)
    • RE: SS amplifier for my 10 Ohm LS3/5A - Travis 12:00:34 08/04/17 (0)
  • A Classic Electrocompaniet 25w/ch pure class A power amp - Timbo in Oz 03:15:25 07/28/17 (0)
  • RE: SS amplifier for my 10 Ohm LS3/5A - Disbeliever 09:55:32 07/25/17 (0)
  • RE: SS amplifier for my 10 Ohm LS3/5A - erik 18:20:23 07/24/17 (0)
  • RE: SS amplifier - hifitommy 17:35:16 07/24/17 (0)
  • Pass XA-25 - bigshow 16:30:04 07/24/17 (2)
    • RE: Pass XA-25 - jec01 06:14:37 07/25/17 (1)
      • RE: Pass XA-25 - john 18:09:36 07/27/17 (0)
  • RE: SS amplifier for my 10 Ohm LS3/5A - bare 15:07:36 07/24/17 (0)
  • If those are original LS3/5As, they only handle about 35 watts. - Ralph 10:37:56 07/24/17 (0)
  • RE: SS amplifier for my 10 Ohm LS3/5A - pictureguy 23:47:21 07/23/17 (0)
  • RE: SS amplifier for my 10 Ohm LS3/5A - mondial 21:32:04 07/23/17 (0)
  • RE: SS amplifier for my 10 Ohm LS3/5A - neolith 17:33:10 07/23/17 (2)
    • RE: SS amplifier for my 10 Ohm LS3/5A - Frihed89 00:11:25 07/24/17 (1)
      • RE: SS amplifier for my 10 Ohm LS3/5A - BCR 04:15:03 07/24/17 (0)
  • RE: SS amplifier for my 10 Ohm LS3/5A - Les Anderson 14:44:44 07/23/17 (1)
    • I have a friend with that Sony amp - mbnx01 15:15:43 07/23/17 (0)
• So, is it safe to surmise that if a preamp has two... - popsy 15:40:27 07/20/17 (22)
  • RE: So, is it safe to surmise that if a preamp has two... - SpotcheckBilly12345 07:24:02 07/23/17 (0)
  • Thanks everyone! n/t. - popsy 23:07:36 07/21/17 (0)
  • Not necessarily - cawson@onetel.com 09:07:23 07/21/17 (2)
    • good catch - mbnx01 15:17:22 07/23/17 (1)
      • RE: good catch - tketcham 15:50:23 07/23/17 (0)
  • RE: So, is it safe to surmise that if a preamp has two... - Palustris 08:50:49 07/21/17 (0)
  • RE: So, is it safe to surmise that if a preamp has two... - BCR 08:43:41 07/21/17 (0)
  • I would check if it's a fixed or variable output... - GregK 08:28:06 07/21/17 (0)
  • RE: So, is it safe to surmise that if a preamp has two... - kentaja 06:56:42 07/21/17 (8)
    • RE: So, is it safe to surmise that if a preamp has two... - tketcham 08:01:45 07/22/17 (7)
      • RE: So, is it safe to surmise that if a preamp has two... - kentaja 09:46:51 07/22/17 (6)
        • RE: So, is it safe to surmise that if a preamp has two... - tketcham 19:44:38 07/22/17 (0)
        • RE: So, is it safe to surmise that if a preamp has two... - John Elison 12:25:57 07/22/17 (4)
          • RE: So, is it safe to surmise that if a preamp has two... - kentaja 20:37:56 07/22/17 (2)
            • RE: So, is it safe to surmise that if a preamp has two... - John Elison 20:48:36 07/22/17 (1)
              • RE: So, is it safe to surmise that if a preamp has two... - kentaja 05:36:59 07/23/17 (0)
          • RE: So, is it safe to surmise that if a preamp has two... - tketcham 19:37:18 07/22/17 (0)
  • RE: So, is it safe to surmise that if a preamp has two... - morricab 06:33:34 07/21/17 (0)
  • That's what I do. - tketcham 04:34:35 07/21/17 (0)
  • RE: So, is it safe to surmise that if a preamp has two... - Kingshead 19:00:33 07/20/17 (0)
  • RE: So, is it safe to surmise that if a preamp has two... - suretyguy 17:13:16 07/20/17 (0)
  • RE: So, is it safe to surmise that if a preamp has two... - John Elison 17:09:18 07/20/17 (0)
• What's better? - Sovenie 07:08:43 07/20/17 (7)
  • RE: What's better? - AudioSoul 07:40:21 07/21/17 (1)
    • RE: What's better? - 6bq5 10:05:07 07/21/17 (0)
  • How long is a ball of string........ - Ozzy 03:54:21 07/21/17 (0)
  • RE: What's better? - Mr Peabody 13:24:38 07/20/17 (0)
  • Bosco's better - airtime 13:05:47 07/20/17 (0)
  • RE: What's better? - PAR 10:44:58 07/20/17 (0)
  • What do your ears tell you? * - Mike K 08:06:30 07/20/17 (0)
• Quad 33, 303 Upgrade/Repair Servicers - suretyguy 05:23:00 07/20/17 (2)
  • RE: Quad 33, 303 Upgrade/Repair Servicers - fredtr 08:14:43 07/20/17 (1)
    • RE: Quad 33, 303 Upgrade/Repair Servicers - suretyguy 10:48:36 07/20/17 (0)
• Voltages for connecting ds18b20 to Edison breakout board - mozobata 02:27:48 07/20/17 (1)
  • Didn't you post this last month as yang1988 ? - AbeCollins 07:15:11 07/20/17 (0)
• VTA (Vacuum Tube Audio) SP9 preamp - BillWojo 19:36:36 07/19/17 (3)
  • RE: VTA (Vacuum Tube Audio) SP9 preamp - BillWojo 20:43:13 07/22/17 (2)
    • RE: VTA (Vacuum Tube Audio) SP9 preamp - John Elison 01:55:16 07/23/17 (1)
      • RE: VTA (Vacuum Tube Audio) SP9 preamp - BillWojo 13:12:15 07/23/17 (0)
• Class D amps and power chords - fstein 09:57:17 07/18/17 (42)
  • RE: Class D amps and power chords - Duster 17:01:22 07/19/17 (4)
    • A shade tree improvement. - M-dB 15:39:23 07/20/17 (2)
      • RE: A shade tree improvement. - Duster 16:21:59 07/20/17 (1)
        • RE: A shade tree improvement. - M-dB 19:45:30 07/20/17 (0)
    • Where did you get this information? -nt - AbeCollins 07:10:15 07/20/17 (0)
  • The Lost Chord? - bare 15:25:20 07/19/17 (0)
  • RE: Class D amps and power chords - scruffy_ 13:48:38 07/19/17 (0)
  • Yes... - mkuller 12:02:37 07/19/17 (0)
  • RE: Class D amps and power chords - AbeCollins 08:34:54 07/19/17 (5)
    • RE: Class D amps and power chords - Kal Rubinson 09:08:27 07/19/17 (4)
      • RE: Class D amps and power chords - pictureguy 12:00:11 07/20/17 (0)
      • RE: Class D amps and power chords - Disbeliever 11:47:42 07/19/17 (0)
      • RE: Class D amps and power chords - AbeCollins 10:35:37 07/19/17 (1)
        • RE: Class D amps and power chords - Kal Rubinson 14:05:48 07/19/17 (0)
  • RE: Class D amps and power chords - bullethead 03:50:28 07/19/17 (0)
  • Why Use Any Power Cord? - cawson@onetel.com 03:24:42 07/19/17 (13)
    • RE: Why Use Any Power Cord? - fstein 14:16:10 07/23/17 (0)
    • Exactly... - AbeCollins 08:24:51 07/19/17 (11)
      • RE: Exactly... - E-Stat 14:50:56 07/19/17 (0)
      • RE: Exactly... - cawson@onetel.com 09:50:12 07/19/17 (9)
        • Costly power cords are never an issue with me... - BigguyinATL 13:05:29 07/19/17 (6)
          • "They don't make a difference if you believe they don't make a difference" - E-Stat 19:07:23 07/19/17 (5)
            • And they do if you belive they do.... - AbeCollins 07:23:15 07/20/17 (4)
              • As for me - E-Stat 08:49:51 07/20/17 (3)
                • And as for me... - AbeCollins 16:18:39 07/20/17 (2)
                  • RE: Yes and OK - BigguyinATL 13:07:41 07/21/17 (0)
                  • Ok - E-Stat 19:26:51 07/20/17 (0)
        • RE: Exactly... - AbeCollins 10:47:57 07/19/17 (1)
          • RE: Exactly... - cawson@onetel.com 09:18:25 07/21/17 (0)
  • RE: Class D amps and power chords - Disbeliever 01:28:09 07/19/17 (2)
    • RE: Class D amps and power chords - Palustris 13:10:34 07/19/17 (0)
    • You're - E-Stat 06:14:38 07/19/17 (0)
  • RE: Class D amps and power chords - Blackdog 18:45:08 07/18/17 (1)
    • RE: Class D amps and power chords - Tidycat1 20:55:54 07/18/17 (0)
  • The "two supplied power cords are 14 gauge shielded Volex cords... - musetap 17:43:47 07/18/17 (0)
  • RE: Class D amps and power chords - Mr Peabody 14:35:20 07/18/17 (0)
  • RE: Class D amps and power chords - YRY 14:07:44 07/18/17 (5)
    • RE: Class D amps and power chords - Blackdog 18:42:54 07/18/17 (4)
      • RE: Class D amps and power chords - YRY 11:47:00 07/19/17 (3)
        • RE: Class D amps and power chords - Blackdog 13:28:23 07/19/17 (2)
          • Sorry for the diversion. - YRY 15:02:09 07/19/17 (1)
            • RE: Sorry for the diversion. - Blackdog 19:17:05 07/19/17 (0)
• voltage step-up transformer effect on sound? - adaug 19:46:38 07/17/17 (3)
  • RE: voltage step-up transformer effect on sound? - Caucasian Blackplate 21:25:23 07/17/17 (2)
    • RE: voltage step-up transformer effect on sound? - adaug 04:48:40 07/18/17 (1)
      • RE: voltage step-up transformer effect on sound? - Caucasian Blackplate 08:24:31 07/18/17 (0)
• Multimeter with max voltage hold - PaulF70 19:17:04 07/15/17 (14)
  • RE: Multimeter with max voltage hold - pictureguy 23:05:35 07/22/17 (0)
  • RE: Multimeter with max voltage hold - PaulF70 17:13:50 07/17/17 (2)
    • RE: Multimeter with max voltage hold - airtime 19:34:48 07/17/17 (0)
    • RE: Multimeter with max voltage hold - John Elison 18:11:04 07/17/17 (0)
  • RE: Multimeter with max voltage hold - PaulF70 13:43:29 07/16/17 (0)
  • RE: Multimeter with max voltage hold - triode3 05:01:41 07/16/17 (8)
    • RE: Multimeter with max voltage hold - PaulF70 06:41:28 07/16/17 (5)
      • RE: Multimeter with max voltage hold - neolith 10:28:17 07/17/17 (1)
        • I love your tagline - PaulF70 17:13:02 07/17/17 (0)
      • RE: Multimeter with max voltage hold - AbeCollins 12:03:40 07/16/17 (0)
      • RE: Multimeter with max voltage hold - John Elison 11:36:03 07/16/17 (1)
        • RE: Multimeter with max voltage hold - airtime 12:45:06 07/16/17 (0)
    • RE: Multimeter with max voltage hold - PaulF70 06:38:32 07/16/17 (0)
    • Modeling - Inmate51 05:56:41 07/16/17 (0)
• Intigrated Amp Dilemma - stereo5 16:08:44 07/15/17 (17)
  • RE: Intigrated Amp Dilemma - Mr Peabody 14:36:20 07/17/17 (0)
  • RE: Intigrated Amp Dilemma - Kingshead 18:34:07 07/16/17 (1)
    • RE: Intigrated Amp Dilemma - digepix 05:06:31 07/17/17 (0)
  • Listen at lower levels; save you hearing - Feanor 08:31:40 07/16/17 (1)
    • AGREE: Listen at lower levels; save you hearing.. It WILL matter when you go deaf. - 3+4=5 09:43:20 07/16/17 (0)
  • Integrated Amp Dilemma - Inmate51 07:58:05 07/16/17 (2)
    • RE: Integrated Amp Dilemma - G Squared 17:36:49 07/16/17 (0)
    • RE: Integrated Amp Dilemma - Kingshead 08:35:13 07/16/17 (0)
  • RE: Intigrated Amp Dilemma - fstein 05:13:45 07/16/17 (0)
  • RE: Plinius Hartago - kkak66 23:42:12 07/15/17 (0)
  • RE: Intigrated Amp Dilemma - Mr Peabody 20:51:22 07/15/17 (0)
  • RE: Intigrated Amp Dilemma - digepix 20:48:45 07/15/17 (0)
  • RE: Intigrated Amp Dilemma - Kingshead 20:11:24 07/15/17 (0)
  • RE: Intigrated Amp Dilemma - chocolate_lover9999@yahoo.com 18:00:29 07/15/17 (3)
    • RE: Intigrated Amp Dilemma - stereo5 18:49:53 07/15/17 (2)
      • RE: Intigrated Amp Dilemma - Caucasian Blackplate 11:51:41 07/18/17 (0)
      • RE: Intigrated Amp Dilemma - airtime 19:15:55 07/15/17 (0)
• Krazy kwestion about older Krell preamps... - David S. 10:36:37 07/13/17 (19)
  • RE: Krazy kwestion about older Krell preamps... - KanedaK 01:11:19 07/25/17 (1)
    • Well, that's kinda exactly what I was asking about. Hoped for experiences between the A/V and 2 chan units... - David S. 13:39:28 07/27/17 (0)
  • RE: Krazy kwestion about older Krell preamps... - airtime 19:05:28 07/14/17 (2)
    • Sigh. The key is? I don't WANT HDMI - David S. 12:03:41 07/15/17 (1)
      • RE: Sigh. The key is? I don't WANT HDMI - airtime 12:48:36 07/15/17 (0)
  • RE: Krazy kwestion about older Krell preamps... - AbeCollins 06:59:25 07/14/17 (4)
    • Thank you for the input, Abe! - David S. 08:58:47 07/14/17 (3)
      • Pre? - bare 10:02:00 07/15/17 (2)
        • RE: WILL.. better or at least Equal ..Any.. premade preamp money can buy. - David S. 11:58:51 07/15/17 (1)
          • Yup... - kootenay 13:27:09 07/15/17 (0)
  • Some of them were very good... - kootenay 13:09:28 07/13/17 (8)
    • Sure can't argue with you there, kootenay, but that's at least a decade out of my pricerange... - David S. 13:41:58 07/13/17 (7)
      • Ok... - kootenay 14:05:48 07/13/17 (6)
        • Gotcha! Is there a standalone preamp you could compare that to? - David S. 14:15:51 07/13/17 (5)
          • I have an ARC LS3B - G Squared 12:27:33 07/14/17 (2)
            • Keeping my eyes open for an LS3B - had an LS3 & LOVED it. - David S. 06:21:05 07/16/17 (1)
              • UPDATE: Have an LS3b inbound! - David S. 11:49:00 09/11/17 (0)
          • The Showcase's pre amp section design was trickled down... - kootenay 15:03:58 07/13/17 (1)
            • Hope Showcase pre was better than the matching power amps... - kuma 02:00:38 07/24/17 (0)
• Power-on funtion of amplifier on the fritz. - Duster 17:42:09 07/12/17 (17)
  • RE: Power-on funtion of amplifier on the fritz. - zollnerus@gmail.com 09:57:47 10/30/20 (0)
  • RE: Power-on funtion of amplifier on the fritz. - wheezer 10:52:57 08/03/17 (0)
  • RE: Power-on funtion of amplifier on the fritz. - AJ 07:05:07 07/14/17 (0)
  • Update: Power-on funtion of amplifier on the fritz. - Duster 14:44:44 07/13/17 (2)
    • My only thought is 'if it ain't broke, don't fix it' . nt - 3+4=5 16:31:25 07/13/17 (1)
      • If the fuses remain stable, it's all good (nt) - Duster 16:41:21 07/13/17 (0)
  • RE: Power-on funtion of amplifier on the fritz. - rkeman 13:18:06 07/13/17 (1)
    • Brystom has a Bryston only repair shop in New England. For all US products. - 3+4=5 14:04:25 07/13/17 (0)
  • My guess, with blown fuses.. switch and or relay is 'welded' 'open' - 3+4=5 10:54:42 07/13/17 (2)
    • good answer, but don't you mean welded closed? - madisonears 18:40:41 07/13/17 (1)
      • RE: good answer, but don't you mean welded closed? - Duster 22:57:43 07/13/17 (0)
  • Confused - madisonears 18:31:58 07/12/17 (5)
    • RE: Confused - Duster 19:13:35 07/12/17 (4)
      • RE: Confused - fstein 09:23:08 07/13/17 (3)
        • RE: Confused - Duster 09:48:09 07/13/17 (2)
          • Was it unplugged while powered up? The pop of unplugging might have blown fuses? - 3+4=5 13:21:15 07/14/17 (1)
            • RE: Was it unplugged while powered up? The pop of unplugging might have blown fuses? - Duster 15:30:30 07/14/17 (0)
• Preamp break-in - dbphd 02:00:09 07/11/17 (24)
  • RE: Preamp break-in - dbphd 17:38:19 08/16/17 (2)
    • RE: Preamp break-in - Disbeliever 01:23:27 08/18/17 (1)
      • break-in - bare 09:15:20 08/29/17 (0)
  • RE: Preamp break-in - Rod M 19:27:22 07/11/17 (6)
    • RE: Preamp break-in - dbphd 02:41:26 07/12/17 (5)
      • What!? - bare 08:25:19 07/12/17 (4)
        • RE: What!? - dbphd 12:27:15 07/12/17 (2)
          • RE: What!? - fantja 16:17:44 07/12/17 (1)
            • No... - E-Stat 17:54:35 07/12/17 (0)
        • The my toy is better than your toy game? LOL. - 3+4=5 08:40:13 07/12/17 (0)
  • each input? no. Maybe the phono (if you have one) may need it too. nt.. - 3+4=5 14:23:38 07/11/17 (1)
    • RE: each input? no. Maybe the phono (if you have one) may need it too. nt.. - FSonicSmith 18:17:42 07/11/17 (0)
  • OK - Frihed89 12:20:11 07/11/17 (2)
    • The 'your brain will adjust to the (bad) sound' is only true for novices.. - 3+4=5 14:22:19 07/11/17 (1)
      • RE: The 'your brain will adjust to the (bad) sound' is only true for novices.. - Mick Wolfe 19:27:37 07/11/17 (0)
  • RE: Preamp break-in - Audiopile1 12:07:01 07/11/17 (0)
  • RE: Preamp break-in - dbphd 10:58:56 07/11/17 (4)
    • Have you asked Ayre this question ? - bjamz 13:39:10 07/11/17 (2)
      • RE: Have you asked Ayre this question ? - dbphd 11:26:27 07/15/17 (0)
      • LOL. Same preamp, but for some people it might be 112 hrs. while for others 500 hrs.? - Rick W 13:04:32 07/13/17 (0)
    • RE: Preamp break-in - airtime 11:09:14 07/11/17 (0)
  • RE: Preamp break-in - airtime 09:16:36 07/11/17 (0)
  • RE: Preamp break-in .. Really ? - bare 09:09:45 07/11/17 (0)
  • RE: Preamp break-in - fin1bxn@msn.com 05:31:56 07/11/17 (0)
• Subwoofer for digital amp - fstein 00:02:38 07/08/17 (4)
  • RE: Subwoofer for digital amp - fstein 00:53:22 07/08/17 (3)
    • RE: Subwoofer for digital amp - Kal Rubinson 05:56:27 07/08/17 (2)
      • RE: Subwoofer for digital amp - fstein 06:35:42 07/08/17 (1)
        • RE: Subwoofer for digital amp - Kal Rubinson 07:30:10 07/08/17 (0)
• What would cause an integrated amp to play louder in one channel vs another? - Les Anderson 15:13:28 07/07/17 (15)
  • RE: What would cause an integrated amp to play louder in one channel vs another? - Foofy123 19:37:03 07/11/17 (0)
  • RE: What would cause an integrated amp to play louder in one channel vs another? - mrdavis842 12:54:06 07/10/17 (0)
  • RE: What would cause an integrated amp to play louder in one channel vs another? - digepix 07:56:49 07/10/17 (1)
    • this is a good point. And could be the problem, fixible with no service trip? nt - 3+4=5 13:58:34 07/10/17 (0)
  • RE: What would cause an integrated amp to play louder in one channel vs another? - noway 19:08:34 07/08/17 (0)
  • Lots of things - E-Stat 10:57:25 07/08/17 (0)
  • RE: What would cause an integrated amp to play louder in one channel vs another? - airtime 07:36:34 07/08/17 (0)
  • RE: What would cause an integrated amp to play louder in one channel vs another? - jea48 20:28:15 07/07/17 (0)
  • RE: What would cause an integrated amp to play louder in one channel vs another? - fredtr 17:23:51 07/07/17 (0)
  • An additional thought... - Les Anderson 16:47:27 07/07/17 (0)
  • A used buy and it has Issues?? - bare 16:14:51 07/07/17 (1)
    • RE: A used buy and it has Issues?? - Les Anderson 16:22:48 07/07/17 (0)
  • RE: What would cause an integrated amp to play louder in one channel vs another? - Blackdog 15:52:39 07/07/17 (1)
    • RE: What would cause an integrated amp to play louder in one channel vs another? - Les Anderson 16:23:06 07/07/17 (0)
  • RE: What would cause an integrated amp to play louder in one channel vs another? - Les Anderson 15:44:42 07/07/17 (0)
• Amplifier Input Topology - Triode_Kingdom 12:27:57 07/07/17 (6)
  • We went down this road about 30 years ago. - Ralph 10:29:39 07/10/17 (1)
    • RE: We went down this road about 30 years ago. - Triode_Kingdom 00:02:42 07/11/17 (0)
  • RE: Amplifier Input Topology - Blackdog 16:00:37 07/07/17 (1)
    • RE: Amplifier Input Topology - Triode_Kingdom 19:42:03 07/07/17 (0)
  • RE: Amplifier Input Topology - djk 13:06:46 07/07/17 (1)
    • RE: Amplifier Input Topology - Triode_Kingdom 13:16:11 07/07/17 (0)
• How long is too long in a repair shop? - Macncheez 18:39:45 07/04/17 (19)
  • RE: How long is too long in a repair shop? - Macncheez 05:07:27 07/09/17 (2)
    • Great News - airtime 12:56:11 07/10/17 (0)
    • RE: How long is too long in a repair shop? - SgreenP@MSN.com 12:59:03 07/09/17 (0)
  • RE: How long is too long in a repair shop? - gordguide 15:12:41 07/06/17 (0)
  • general repair: 3 weeks max. /// specialty custom upgrades: 6 months. nt - 3+4=5 13:26:05 07/06/17 (0)
  • So I was going to take an old coat to Goodwill.... - viridian 17:19:12 07/05/17 (0)
  • When the customer thinks it is. - Ozzie 16:23:10 07/05/17 (0)
  • RE: How long is too long in a repair shop? - airtime 12:49:06 07/05/17 (5)
    • +1 - djk 14:49:25 07/05/17 (4)
      • And... - AbeCollins 15:24:18 07/05/17 (3)
        • Tuner alignment in the MX117 from - E-Stat 05:12:43 07/06/17 (2)
          • RE: Tuner alignment in the MX117 from - AbeCollins 10:29:13 07/06/17 (1)
            • RE: Tuner alignment in the MX117 from - djk 14:35:37 07/06/17 (0)
  • Why? Do you have alternatives? - Rick W 10:13:46 07/05/17 (0)
  • When you have to post that question... - musetap 20:31:50 07/04/17 (0)
  • Having worked in several repair shops... - Charles Hansen 19:42:01 07/04/17 (1)
    • RE: Having worked in several repair shops... - Sondek 07:05:16 07/05/17 (0)
  • a couple weeks at most (nt) - Chip647 19:25:18 07/04/17 (0)
  • RE: How long is too long in a repair shop? - Kingshead 19:19:54 07/04/17 (0)
• ICEedge - scruffy_ 15:52:23 07/04/17 (12)
  • RE: ICEedge - DAVID 21:42:28 07/21/17 (0)
  • RE: ICEedge - Jack G 11:01:03 07/07/17 (0)
  • RE: ICEedge - AbeCollins 10:44:45 07/06/17 (6)
    • RE: ICEedge - pictureguy 22:14:00 07/07/17 (1)
      • RE: ICEedge - bare 07:09:10 07/08/17 (0)
    • RE: ICEedge - fredtr 14:31:46 07/06/17 (0)
    • Either way ... - Feanor 13:39:35 07/06/17 (2)
      • RE: Either way ... - jimmycj 15:58:36 07/29/17 (0)
      • Have you heard of Devialet? - Freo-1 14:16:54 07/24/17 (0)
  • RE: ICEedge - bjamz 02:25:46 07/06/17 (2)
    • RE: ICEedge - scruffy_ 04:17:37 07/06/17 (1)
      • Response from Wyred 4 Sound - scruffy_ 10:37:32 07/06/17 (0)
• No output or invalid output on a 74HC595 shift register - makiyang614@gmail.com 20:59:57 07/3/17 (1)
  • RE: No output or invalid output on a 74HC595 shift register - fredtr 08:18:32 07/04/17 (0)
• Aragon 4004 MKii issue - JOThompson 12:07:40 07/03/17 (5)
  • RE: Aragon 4004 MKii issue - airtime 13:02:08 07/04/17 (0)
  • RE: Aragon 4004 MKii issue - FenderLover 16:54:44 07/03/17 (0)
  • RE: Aragon 4004 MKii issue - SgreenP@MSN.com 12:43:36 07/03/17 (2)
    • RE: Aragon 4004 MKii issue - JOThompson 18:22:53 07/03/17 (1)
      • RE: Aragon 4004 MKii issue - alfagil 09:44:18 07/10/17 (0)
• Power transformer for NAD C162 - JonM 14:53:52 07/01/17 (13)
  • RE: Power transformer for NAD C162 - fredtr 08:05:05 07/04/17 (2)
    • RE: Power transformer for NAD C162 - JonM 09:04:47 07/06/17 (1)
      • RE: Power transformer for NAD C162 - JonM 02:55:56 07/10/17 (0)
  • RE: Power transformer for NAD C162 - JonM 15:08:26 07/01/17 (9)
    • RE: Power transformer for NAD C162 - Blackdog 18:53:08 07/01/17 (6)
      • RE: Power transformer for NAD C162 - airtime 07:48:53 07/02/17 (4)
        • RE: Power transformer for NAD C162 - JonM 06:15:56 07/03/17 (3)
          • RE: Power transformer for NAD C162 - airtime 07:03:33 07/03/17 (2)
            • RE: Power transformer for NAD C162 - JonM 14:10:24 07/03/17 (1)
              • RE: Power transformer for NAD C162 - airtime 19:07:38 07/03/17 (0)
      • RE: Power transformer for NAD C162 - JonM 03:29:32 07/02/17 (0)
    • RE: Power transformer for NAD C162 - mr.bear 15:45:30 07/01/17 (1)
      • RE: Power transformer for NAD C162 - JonM 16:39:22 07/01/17 (0)
• Computer-Switcher-?-StageBug-Anchor AN-130 - Hjourzt 11:02:57 07/01/17 (0)
• Passive preamp RCA output to SUB amp? Question on current configuration - bullethead 03:40:12 06/30/17 (16)
  • I think I know the problem andhow to fix - dhrab 11:48:53 07/01/17 (7)
    • problem fixed - bullethead 13:51:05 07/01/17 (6)
      • Great job - airtime 07:07:30 07/03/17 (4)
        • That sounds like one serious designed preamp.... appears to be - dhrab 05:56:00 07/04/17 (3)
          • Redemption - bullethead 05:14:33 07/06/17 (0)
          • RE: That sounds like one serious designed preamp.... appears to be - E-Stat 06:55:57 07/05/17 (1)
            • I Stand Corrected ... but - dhrab 05:06:56 07/06/17 (0)
      • That's a nice preamp ... - dhrab 14:52:56 07/01/17 (0)
  • Will the sub play loud enough - madisonears 19:19:32 06/30/17 (0)
  • RE: Passive preamp RCA output to SUB amp? Question on current configuration - airtime 07:29:06 06/30/17 (6)
    • RE: Passive preamp RCA output to SUB amp? Question on current configuration - bullethead 07:40:40 06/30/17 (5)
      • RE: Passive preamp RCA output to SUB amp? Question on current configuration - airtime 07:57:58 06/30/17 (4)
        • RE: Passive preamp RCA output to SUB amp? Question on current configuration - bullethead 08:00:22 06/30/17 (3)
          • RE: Passive preamp RCA output to SUB amp? Question on current configuration - AbeCollins 08:53:14 06/30/17 (2)
            • RE: Passive preamp RCA output to SUB amp? Question on current configuration - airtime 09:01:19 06/30/17 (1)
              • RE: Passive preamp RCA output to SUB amp? Question on current configuration - neolith 15:13:52 06/30/17 (0)
• Amp Case Issue - Fal 17:28:04 06/27/17 (16)
  • RE: Amp Case Issue - akolegov 10:07:02 07/02/17 (1)
    • RE: Amp Case Issue - Fal 13:23:22 07/02/17 (0)
  • The components inside are not delicate flowers - mr.bear 13:35:29 06/30/17 (0)
  • RE: Amp Case Issue - R Browne 09:46:20 06/29/17 (3)
    • RE: Amp Case Issue ?? - bare 16:33:04 06/29/17 (2)
      • As a last resort... - R Browne 23:41:07 06/29/17 (0)
      • RE: Amp Case Issue ?? - painter27 19:07:45 06/29/17 (0)
  • First try a slightly damp microfibre cloth before moving onto more exotic fluids (nt) - 13th Duke of Wymbourne 12:09:20 06/28/17 (0)
  • RE: Amp Case Issue - Douger 07:01:50 06/28/17 (1)
    • Simple Green, ain't... - mr.bear 13:22:35 06/30/17 (0)
  • RE: Amp Case Issue - The Dill 17:53:30 06/27/17 (5)
    • RE: Amp Case Issue - PAR 05:04:59 06/28/17 (4)
      • RE: Amp Case Issue - gordguide 15:23:23 07/06/17 (2)
        • RE: Amp Case Issue - PAR 16:49:42 07/06/17 (0)
        • RE: Amp Case Issue - The Dill 15:33:34 07/06/17 (0)
      • RE: Amp Case Issue - The Dill 06:26:47 06/28/17 (0)
• Wells Audio Majestic Integrated Amp? - tincup 06:14:56 06/27/17 (1)
  • RE: Wells Audio Majestic Integrated Amp? - Mick Wolfe 09:16:10 06/29/17 (0)
• Preamplifier about audio - lingl955@yahoo.com 00:51:52 06/27/17 (4)
  • RE: Preamplifier about audio - fredtr 12:02:49 06/27/17 (0)
  • It's not an opamp or a preamp. What's your question? (NT) - Kal Rubinson 06:38:44 06/27/17 (2)
    • RE: It's not an opamp or a preamp. What's your question? (NT) - lingl955@yahoo.com 20:35:44 06/27/17 (1)
      • Yes is the short answer - Ralph 09:05:13 06/28/17 (0)
• Biasing power amp - compubias - Heifetz 23:18:08 06/26/17 (4)
  • RE: Biasing power amp - compubias - airtime 07:31:30 06/27/17 (0)
  • EL34 biasing - FenderLover 23:49:31 06/26/17 (2)
    • RE: EL34 biasing - Heifetz 00:32:53 06/27/17 (1)
      • If the tube exhibiting weaker signal than the others... - kootenay 00:48:42 06/27/17 (0)
• Cayin A-88T - waterfall 10:10:18 06/26/17 (4)
  • RE: Cayin - M3 lover 11:32:41 06/26/17 (3)
    • RE: Cayin sales - M3 lover 11:20:25 06/27/17 (0)
    • RE: Cayin - fstein 03:18:18 06/27/17 (1)
      • RE: Cayin - waterfall 07:07:55 06/27/17 (0)
• LM7805 voltage drop when attach load - makiyang614@gmail.com 20:43:55 06/25/17 (5)
  • RE: LM7805 voltage drop when attach load - Palustris 08:02:47 06/26/17 (0)
  • RE: LM7805 voltage drop when attach load - airtime 06:55:52 06/26/17 (0)
  • RE: LM7805 voltage drop when attach load - AbeCollins 05:18:44 06/26/17 (0)
  • RE: LM7805 voltage drop when attach load - fredtr 04:49:48 06/26/17 (1)
    • RE: LM7805 voltage drop when attach load - fredtr 13:47:50 06/26/17 (0)
• Repair In SW Virginia - Gene54 06:00:27 06/25/17 (6)
  • RE: Repair In SW Virginia - Paul Wilson 05:35:02 06/26/17 (2)
    • RE: Repair In SW Virginia - Gene54 18:51:46 06/26/17 (1)
      • RE: Repair In SW Virginia - hbs4y2001@yahoo.com 15:22:49 06/27/17 (0)
  • RE: Repair In SW Virginia - fantja 21:24:13 06/25/17 (0)
  • RE: Repair In SW Virginia - Mick Wolfe 15:52:50 06/25/17 (1)
    • RE: Repair In SW Virginia - DrN 06:23:00 06/26/17 (0)
• audio research REF 210 monoblocks vs REF 150 - mondial 04:33:26 06/23/17 (22)
  • RE: audio research REF 210 monoblocks vs REF 150 - mondial 19:35:46 07/10/17 (1)
    • RE: audio research REF 210 monoblocks vs REF 150 - mondial 19:39:51 07/10/17 (0)
  • RE: audio research REF 210 monoblocks vs REF 150 - The Lost Bears 08:38:12 06/27/17 (0)
  • RE: audio research REF 210 monoblocks vs REF 150 - mondial 16:57:09 06/26/17 (8)
    • Nice to know that... - kootenay 18:29:17 06/26/17 (7)
      • RE: Nice to know that... - mondial 21:24:18 06/26/17 (6)
        • Sure no problem... - kootenay 22:50:12 06/26/17 (5)
          • RE: Sure no problem... - mondial 00:15:44 06/27/17 (4)
            • According to the NAFTA... - kootenay 00:39:25 06/27/17 (3)
              • RE: According to the NAFTA... - mondial 04:22:45 06/27/17 (2)
                • Sorry... - kootenay 11:50:41 06/27/17 (1)
                  • RE: Sorry... - mondial 22:20:58 06/27/17 (0)
  • RE: audio research REF 210 monoblocks vs REF 150 - mondial 21:04:13 06/24/17 (3)
    • I have and.... - kootenay 13:34:26 06/25/17 (2)
      • RE: I have and.... - mondial 20:38:15 06/25/17 (1)
        • I'll let you know my.... - kootenay 22:01:12 06/25/17 (0)
  • RE: audio research REF 210 monoblocks vs REF 150 - fantja 22:04:07 06/23/17 (1)
    • Yes, but - E-Stat 17:08:13 06/24/17 (0)
  • RE: audio research REF 210 monoblocks vs REF 150 - fin1bxn@msn.com 08:06:13 06/23/17 (0)
  • RE: audio research REF 210 monoblocks vs REF 150 - morricab 04:42:29 06/23/17 (2)
    • RE: audio research REF 210 monoblocks vs REF 150 - KeithR 11:53:00 06/24/17 (0)
    • RE: audio research REF 210 monoblocks vs REF 150 - fantja 22:05:35 06/23/17 (0)

Threads started on or before 4/30/07 are archived Here.
Threads started on or before 4/15/07 are archived Here.
Threads started on or before 3/31/07 are archived Here.
Threads started on or before 3/15/07 are archived Here.
Threads started on or before 2/28/07 are archived Here.

---

[ Top of Page ] [ Contact Us ] [ Support/Wish List ] [ Copyright © 2017, Audio Asylum, all rights reserved ] [ Take5 ]

---

[ General ] [ Speakers ] [ Tubes ] [ Vinyl ] [ Digital ] [ Hi-Rez ] [ Video Asylum ] [ Cables ] [ Tweaks/DIY ] [ Music ] [ Films ]

---