In Reply to: RE: Here you go posted by Kythyn on June 13, 2017 at 16:14:52:
You need to get feet for your T IV, There are stainless steel brackets at hardware stores that you can use as their predrilled holes happen to coincide with the spacing of the holes in the TIV. Get 3 sets of feet (2 brackets each) for the bass panels and a pair of feet for the mid tweet panel.
Keep the mid tweet panel separate from the bass panels, take the hinges off once the legs are on. That will prevent intermodulation distortion from the bass panels shaking the mid and tweeter.
Once you have the legs on you can arrange the panels in an equidistant arc. The deep bass panel would then be put at the sidewalls and roughly perpendicular to it. That should be a good starting point.
.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Here you go - Satie 18:08:49 06/13/17 (3)
- RE: Here you go - Kythyn 20:04:28 06/13/17 (2)
- RE: Here you go - Kythyn 20:14:18 06/13/17 (1)
- RE: Here you go - Satie 22:10:56 06/13/17 (0)