Home Planar Speaker Asylum

Welcome! Need support, you got it. Or share your ideas and experiences.

RE: Replacing the metal jumpers in your maggies

You don't have jumpers in your model. You do have a connection plate with connectors and a fuse holder that can be readily improved upon by bypassing the fuse and changing the binding posts to non magnetic ones. The Cardas low profile ones are a popular choice here and are not very expensive. Do a search of the asylum on that and you will find some of the many things people have tried. Your amp should be sufficient for the .7s so that you can probably get away with no fuse and bypass the fuse holder, particularly so since you are using subwoofers which take off a substantial load from the speaker and amp. But you do run a higher risk of frying your tweeters under extreme conditions. This would also void the warranty.



This post is made possible by the generous support of people like you and our sponsors:
  Signature Sound   [ Signature Sound Lounge ]


Follow Ups Full Thread
Follow Ups
  • RE: Replacing the metal jumpers in your maggies - Satie 10:41:31 05/28/17 (0)

FAQ

Post a Message!

Forgot Password?
Moniker (Username):
Password (Optional):
  Remember my Moniker & Password  (What's this?)    Eat Me
E-Mail (Optional):
Subject:
Message:   (Posts are subject to Content Rules)
Optional Link URL:
Optional Link Title:
Optional Image URL:
Upload Image:
E-mail Replies:  Automagically notify you when someone responds.