• RE: Quad ESL-63 owners: Please read and consider! - kentaja 03:56:04 04/06/15 (2)
  In Reply to: RE: Quad ESL-63 owners: Please read and consider! posted by louie3 on April 05, 2015 at 14:59:34

  The Mye Stand will add mass in addition to increasing frame rigidity, stop flexing, etc.
  
  I have had the chance to listen to the ESL-63 type speaker in solid metal frames, i.e. 2805, etc. and wood frames. I much prefer metal.
  

  ---

  • RE: Quad ESL-63 owners: Please read and consider! - louie3 06:30:43 04/06/15 (1)
    In Reply to: RE: Quad ESL-63 owners: Please read and consider! posted by kentaja on April 06, 2015 at 03:56:04

    Thanks, Kent It does make sense that adding mass and connecting everything together solidly would make a difference.
    
    Do you think the difference between wood and metal stands was related to the construction of the wood stands or does wood tend to soften things?
    
    I can hear a very definite difference between a cartridge in a wood body and the same cartridge in a metal body. Very different.
    
    Since I prefer the metal body for cartridges maybe metal stands are the way to go for me.
    
    Note to self: Start saving for Mye stands, ask Grant about longer feet to raise the speaker.
    
    
    

    ---

    • Longer feet, no problem! - grantv 10:10:46 04/09/15 (0)
      In Reply to: RE: Quad ESL-63 owners: Please read and consider! posted by 36797 on April 06, 2015 at 06:30:43

      I can make them any height you need. Aesthetics; overcoming the 14" space visually is the biggest hurdle. Shipping; another small concern.
      A bit of design time and I can work this all out.
      
      
      

      ---
• RE: Quad ESL-63 owners: Please read and consider! - banpuku 15:01:23 04/05/15 (6)
  In Reply to: RE: Quad ESL-63 owners: Please read and consider! posted by louie3 on April 05, 2015 at 14:59:34

  I have yet to get the speakers more than 4 inches off the floor. Do you feel that getting the center of the panel at ear height is beneficial? If so, what does it change sonically? I might consider trying.
  

  ---

  • RE: Quad ESL-63 owners: Please read and consider! - louie3 15:18:42 04/05/15 (5)
    In Reply to: RE: Quad ESL-63 owners: Please read and consider! posted by banpuku on April 05, 2015 at 15:01:23

    Kent explains this better than I do, but essentially, the sound of the 63 begins in the middle of the speaker, moving out from the center. It is not how far off the floor that changes the sound, but how much closer to ear level.
    
    As the speakers move up off the floor, the sound becomes, not better, but different.
    
    As the height of the speaker approaches ear level, the sound becomes more neutral, and to me, with better definition and openness in the upper midrange and top.
    
    I have a particular situation in that my chair is on a platform raised about five inches off the floor, so I have to account for that five inches when I think about stands.
    
    You can raise your 63s with pretty much anything to get a taste of the difference...concrete blocks.
    
    Some folks like them on the floor, some folks like them up...it is all about what blows your skirt up.
    
    I like, in my room with my system, the speakers up towards ear level.
    
    But six inch blocks would be fine for testing. In fact, the other pair of 63s I had lived for quite some time on concrete blocks, but blocks don't have a decorator aesthetic that goes over well with some folks.
    
    Although you can paint them black. :)
    

    ---

    • RE: Quad ESL-63 owners: Please read and consider! - kentaja 04:00:28 04/06/15 (0)
      In Reply to: RE: Quad ESL-63 owners: Please read and consider! posted by louie3 on April 05, 2015 at 15:18:42

      That is a good description. The speakers are not necessarily better off the floor just different. Some will like it this way some will not.
      
      Raising them off the floor does increase the size of the sonic picture, cleans things up a bit. There is a slight leaning out of the sound. Nothing major but it is noticeable.
      
      I use them both ways on the floor and on stands. I could live with them either way.
      
      Easy enough to try them off the floor. Some boxes, a chair, just get them up in the air and give it a listen. If one likes the results then get some stands.
      

      ---
    • RE: Quad ESL-63 owners: Please read and consider! - banpuku 16:47:46 04/05/15 (3)
      In Reply to: RE: Quad ESL-63 owners: Please read and consider! posted by louie3 on April 05, 2015 at 15:18:42

      I think this is another reason why the re-do of the base has appeal. It will allow the user to have threaded holes to accommodate heavy rods (say 1/2"- 24) with brass cones on the end. The user can adjust the cones up or down.
      

      ---

      • stand alternative? - louie3 14:45:38 04/06/15 (2)
        In Reply to: RE: Quad ESL-63 owners: Please read and consider! posted by banpuku on April 05, 2015 at 16:47:46

        FWIW...The Cable Company does sell a Sound Anchor stand for the 63. The stand has both height and tilt adjustment.
        
        
        Shipping to the wilds of Tennessee is about $160. These things are not particularly attractive, but are probably pretty effective, although I do not believe the 63 is rigid mounted to the stand, although I may be wrong about that.
        
        FWIW

        • http://www.thecableco.com/Product/Quad-ESL-63   (Open in New Window)

        
        

        ---

        • RE: stand alternative? - Tony K 20:49:03 10/06/22 (1)
          In Reply to: RE: stand alternative? posted by louie3 on April 06, 2015 at 14:45:38

          Hi banpuku.
          Did you ever get around to making up new bases for your ESL63's?
          What mods did you have any success with?
          Thanks in an advance for a reply.
          Regards, Tony.
          
          

          ---

          • RE: stand alternative? - idk79 13:53:02 10/09/22 (0)
            In Reply to: RE: stand alternative? posted by Tony K on October 06, 2022 at 20:49:03

            All the things with regards to the outer frame and base instability of a 63 have been addressed with the 2805 and 2812.
            By the way, in the both of those designs the inner stat panels are decoupled from the outer frame in the exact same way as the 63s.
            

            ---

Post a Followup:

This post is made possible by the generous support of people like you and our sponsors:

Signature Sound

[ Signature Sound Lounge ]

---

[ Top of Page ] [ Contact Us ] [ Support/Wish List ] [ Copyright © 2024, Audio Asylum, all rights reserved ]

---

[ General ] [ Speakers ] [ Tubes ] [ Vinyl ] [ Digital ] [ Hi-Rez ] [ Video Asylum ] [ Cables ] [ Tweaks/DIY ] [ Music ] [ Films ]

---