|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
72.217.102.158
In Reply to: RE: Hi-End Headphone Cables posted by Duster on September 28, 2020 at 17:29:13
I got the 4.4mm Balanced version....no US dealer, which is why I had my friend send it from Japan.
iect_04 _ *** c
04 2pin / CIEM type designed for the sound of dense mid-low range and open high range. This is a hybrid cable that uses high-purity 6N copper with a purity of 99.9999% or higher and silver-plated 4N copper for the conductor. 2pin is finished with rhodium plating, which has excellent abrasion resistance.
Non-magnetic titanium is used for the housing that covers the connector on the earphone side in order to reduce the effect on the human body as much as possible.iect_04_ub3c: 3.5 3p -2pin (l / r)
iect_04_bl2c: 2.5 4p -2pin (l / r)
iect_04_bl4c: 4.4 5p -2pin (l / r)conductor: 6n + silver-plated 4n (ofc)
jacket: pvc
phone plug: gold plated
plug cap: titan
2pin (ciem): rhodium plated
length: 1.2mmade in Japan
Dynobots Audio - Music is the Bridge Between Heaven and Earth
Edits: 10/20/20 10/20/20 10/20/20Follow Ups:
Do you require an angled 4.4mm plug, or will a straight plug work for your wants/needs, Dynobot?
Angled or straight works for me....doesn't matter.
Dynobots Audio - Music is the Bridge Between Heaven and Earth
Mogami W3159 features a very thin outer diameter 24 AWG twisted pair insulated with a foamed CPP (Cellular Polypropylene) dielectric, a served shield (spiraled, not braided) with a drain wire, and a thin outer jacket. It's very lightweight and flexible, but it needs to be treated kindly due to the thin jacket that is prone to nicks and scratches. Perhaps thin silk tubing as protective sleeving would be nice to use for a headphone cable project.
Don't let the low-price turn you off, since the audio performance is excellent due to the low dielectric constant of the cellular polypropylene insulation. It's an impressive cable for line-level use, AES/EBU applications, and DC umbilical builds. I plan to build some headphone cables with the Mogami W3159 when I get around to it, as I've had too much on my plate building other cables and power cords lately.
The Oyaide CIEM connectors seem to be a fine choice for the purpose and rather affordable when it comes to audiophile connectors. Sensible and attractive, I reckon.
The 4.4mm connector is very impressive, and appears to be the same design as a more expensive Stout product I've come across on the web. Having a set-screw type strain relief is ideal for a dual cable termination, and the thick walled barrel with carbon fiber layer is impressive. The outer diameter of the Mogami W3159 cable is thin enough to fit through a headphone cable splitter, such as an aluminum with carbon fiber design to match the 4.4mm plug.
https://www.redco.com/Mogami-W3159.html
https://www.ebay.com/itm/Oyaide-CIEM-connector-0-78mm-Gold-plated-plug-made-Japan-/133366388060
https://www.aliexpress.com/item/4000134369577.html
Those are some good picks.
I was actually looking at those Oyaide connectors.
I also think Mogami is a good choice, I like their XLR cables I have in the office.
Going to have to bookmark those, for the near-future. Although these ONSO cables are breakin in nicely. Still, variety is the spice of life...and the audio world.
Thanks
Dynobots Audio - Music is the Bridge Between Heaven and Earth
I'll share some tips to build the DIY headphone cable if you decide to build it, Dynobot.
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: