 
|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
|
|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
In Reply to: Re: 23 ICs Comparative Evaluations including DIY Belden 89259 posted by Jon Risch on June 26, 2001 at 22:22:21:
Hi,Does that mean that adding the 89259 to the signal chain suddenly "reveals" distortion previously masked by nothing? I don't think so somehow. No, the rough sound IS THE 89259. If it sounds smooth then it is because the system losses detail and smoothes over this tendency, not the other way around.
Still, for the money and as a first thing to try it ain't a bad cable. But it also is not one I'd tolerate anywhere in my system.
But we had this discussion before, so I'll can it.
Later T
Follow Ups:
Ok Thorsten,Then where do we go from the Belden cables? What is the incremental cost? And is it something that you only benefit from if the rest of the system is up to the task? Is it worth spending several $K on cables when you can not afford that single ended class A?
dee
;-D
We have been down this road before, see:http://www.AudioAsylum.com/audio/cables/messages/17504.html
and related responses.only then it was with the CC89259. I do not wish to quarrel with Thorsten, but I feel that his comments need to be taken in the proper context.
As I said then, I think that it helps for others reading this to put Thorsten's comments in perspective, since he is very much a perfectionist, and speaks in absolute terms. He also is dead set against the use of stranded conductors in audio cables, and the possibility for some sort of bias is certainly there. We have discussed this in the past as well.
He has stated before that he feels that typical CD playback is completely unacceptable for evaluation of audio components due to severe quality limitations, and so for those out there that "only" have a CD player, it is unlikely that you would notice the very subtle and minute aspects that Thorsten speaks in terms of as major sonic aspects with respect to sonic perfection. These are his own words, seen at:
http://www.AudioAsylum.com/audio/cables/messages/27078.htmlAs for myself, I use many different methods to evaluate audio components. As a practicing engineer, I take many highly refined and sophisticated measurements in order to understand what the component is doing electrically. I use many different sources, such as CD, vinyl, my own recordings (consisting of some open reel tapes, digital to hard disc recordings burned to CD-R, etc.) as well as live microphone feeds. Equipment runs the gamut from SS to tube, homebuilt to modified consumer, and represents a fairly high level of playback performance. Numerous tweaks have been applied to the system, so I have what I (and many others) consider to be a well balanced playback system with excellent resolving power.
In evaluating components that I post about, including DIY cables, I usualy will not just rely on my own system, but check things out on other systems, and get input and feedback from some audio buddies that I visit/correspond with.
I think that I can say unequivocally and some degree of certainty that the kinds of sonic differences that audio cables possess are definitley of a magnitude far less than those of loudspeaker systems. Yet reading Thorsten's post might lead one to believe other wise.
All thing are relative, and unless you knwo the particular scale of the person who is posting, it can be confusing sometimes.When I post about component sonics, I try not to get too far away from a reasonable degree of how much things are stated to affect the sound, keeping in mind that speakers and acoustics are quite a bit more of an influence than other components, and so on down the line. My posted stance on cable sonics has always been that the differences, IN THE CONTEXT OF THE WHOLE SYSTEM, are more of the order of a subtle nature, rather than the night and day types of comments that we sometimes hear (and no, this is not aimed at Thorsten, many others tend toward this kind of description about subtle aspects of audio). To me, speaker differences are night and day, cables are the difference between early afternoon, and late afternoon.
There is also no doubt that Belden 89259 in stock coaxial form has provided many DIYers with a decent quality IC that outperforms OEM freebies, and many of the entry level aftermarket retail cables out there. The twisted pair 89259/89248 cores take it to yet another level of performance, but still not night and day.
I hope that no one is discouraged from trying the various DIY recipes out there, including the various 89259 based recipes, as they represent excellent value for the money, and provide a baseline to work from if seeking more advanced performance in the future.
Jon Risch
where I part company with you is when you ascribe a certain sund to "being revealed" by 89259 when in my experience the fact is that what you hear is the distortion CAUSED by the stranded nature of the 89259 being revealed by a revealing system.That's all. I honestly do respect your work and part of my trials (and errors) with DIY cables where strongly influenced by you. I only object in general to the overhyping of a fairly mediocre (in the ABSOLUTE scheme of things) wire, namely Belden 89259.
I have seen regulary comments claiming that "nothing better" and such, not claims by you I might add. Still, while 89259 might be a nice step up from generic wire, it is from where I stand on one of the bottom rows of a fairly tall ladder.
And considering the work required for the twisted pairs (I remember now - I found two pairs I made up ages ago - one solid solid and the other per your instructions - listened again and still did not like what I heard) I feel that there is better sound to be had for that kind of work.
Ciao T
This shouldn't stand out so much but it is such a contrast with what you see in so many public forums everyday.I think it is also instructive of how much controversy there is in high-end audio. Here we have two respected individuals who honestly disagree on a few matters. Never seen that before. (sarcasm)
I think it points toward the need for everyone to make decisions about how/what they feel about a particular product or technology on their own merits. The Internet has encouraged people to seek out one or another "expert" opinion on a topic to decide what is the "best" product to buy. I would hope that the people in the industry would take the high road on this and discourage "best" and talk more about relative quality and subjective differences. I think Doc Bottlehead is a good example of this. He never slams another product and is always careful to explain that personal preferences are a big part of what is "best".
Thanks Jon and Thorsten for the civilized debate.
Hey jon,
no need to explain yourself, the number of people using your cables and the popularity of it around the world proves itself!
br
Wilks :)
Have you tried the 89259/89248 recipe? This is the one I have where the 89248, 18 gauge solid copper is used for the hot connection and then the 89259 for the return. Twisted with no shield. Sounds excellent to me.Sean H
Hi,Yes, I recently went through all my stuff and fund two pairs of cables I made up. One was exactly as you decribed. I tried them (again) and removed them quickly. Sorry.
If you like what you hear great. But keep trying.
Later T
This post is made possible by the generous support of people like you and our sponsors:
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
