Vinyl Asylum Welcome Licorice Pizza (LP) lovers! Setup guides and Vinyl FAQ.

For Sale Ads FAQ / News / Events

AudioAsylum Trader Sota Moonbeam II - I purchased this new on 12/18/14 from Elusive Disc...

• I'm sure there's somebody here familiar with Audacity. - ghost of olddude55 09:50:02 11/03/18 (13)
  • RE: I'm familiar with Audacity. - JerryS 07:27:50 11/08/18 (0)
  • RE: I'm sure there's somebody here familiar with Audacity. - Munkie_NL 07:13:02 11/05/18 (0)
  • I switched to Vinyl Studio - Des 01:52:39 11/05/18 (0)
  • RE: I'm sure there's somebody here familiar with Audacity. - radiodaddy 15:20:17 11/04/18 (1)
    • Pretty sure the reboot solved the issue. - ghost of olddude55 15:26:17 11/06/18 (0)
  • RE: I'm sure there's somebody here familiar with Audacity. - volunteer 10:31:44 11/03/18 (7)
    • Oops. That 8 GB. nt - ghost of olddude55 10:34:37 11/03/18 (6)
      • RE: Oops. That 8 GB. nt - volunteer 10:37:30 11/03/18 (5)
        • Flashback. First PC we ever had came with 8MB. - ghost of olddude55 10:43:08 11/03/18 (4)
          • 8 MB??? My first ones were in KB, not MB . . .;8^) - Opus 33 1/3 05:19:45 11/04/18 (3)
            • 640 KB was my first; and Gates once said that there would never be a need for more than 640K! )MT( - J. S. Bach 05:24:46 11/06/18 (0)
            • RE: 8 MB??? My first ones were in KB, not MB . . .;8^) - Sondek 08:27:03 11/04/18 (1)
              • My first HD was a 20 MB RLL drive, a Seagate IIRC. - Opus 33 1/3 08:34:06 11/04/18 (0)
• Neato phono accessory - Awe-d-o-file 15:40:40 11/02/18 (1)
  • Nice! Did you DIY that? (n/t) - FenderLover 17:30:49 11/02/18 (0)
• Audio Technica ART-9 with Artemiz arm? - jim o 14:12:01 11/02/18 (9)
  • RE: Audio Technica ART-9 with Artemiz arm? - Johno 17:39:43 11/02/18 (3)
    • RE: Audio Technica ART-9 with Artemiz arm? - jim o 05:01:06 11/03/18 (1)
      • RE: Audio Technica ART-9 with Artemiz arm? - John Elison 07:40:46 11/03/18 (0)
    • RE: Audio Technica ART-9 with Artemiz arm? - jim o 18:01:04 11/02/18 (0)
  • RE: Audio Technica ART-9 with Artemiz arm? - John Elison 17:28:10 11/02/18 (4)
    • RE: Audio Technica ART-9 with Artemiz arm? - jim o 17:49:05 11/02/18 (3)
      • RE: Audio Technica ART-9 with Artemiz arm? - PAR 03:45:05 11/03/18 (1)
        • RE: Audio Technica ART-9 with Artemiz arm? - Mel 08:19:25 11/03/18 (0)
      • RE: Audio Technica ART-9 with Artemiz arm? - John Elison 19:56:44 11/02/18 (0)
• Jeez, there's apparently no limit to prices for cartridges. - Rick W 10:36:39 11/02/18 (21)
  • I will stick with my M97; at least I can replace the stylus when I break it and be back spinning in less ... - J. S. Bach 05:37:53 11/06/18 (0)
  • Thanks, this makes my investment seem pedestrian (nt) - Dave B 10:18:39 11/04/18 (0)
  • RE: Jeez, there's apparently no limit to prices for cartridges. - beach cruiser 15:48:12 11/03/18 (0)
  • Old Dude Beat Me to the Punch ... - TeddiJackEddie 08:51:30 11/03/18 (1)
    • Thanks, but just to be clear... - ghost of olddude55 12:17:50 11/03/18 (0)
  • Well, you won't find many of the people.... - vinyl1 06:52:47 11/03/18 (2)
    • RE: Well, you won't find many of the people.... - Hergest 17:11:33 11/04/18 (1)
      • Is that why you don't post your own system? - Rick W 17:42:33 11/04/18 (0)
  • RE: Jeez, there's apparently no limit to prices for cartridges. - volunteer 04:41:51 11/03/18 (0)
  • A review of it... - PAR 03:27:22 11/03/18 (3)
    • Even the reviewer's system is so over the top, that I am not even jealous. - alaskahiatt 14:18:10 11/03/18 (0)
    • Hilarious! Must be satire. - ghost of olddude55 05:11:40 11/03/18 (0)
    • I feel sorry for parttimeaudiofilers who read this crap n.t. - Story 04:42:45 11/03/18 (0)
  • Well, they ARE only charging $60 to ship a cartridge... - musetap 20:35:49 11/02/18 (0)
  • A mere pittance! - Awe-d-o-file 14:05:25 11/02/18 (0)
  • Jalchatra Bazaar ?? - bare 13:47:52 11/02/18 (0)
  • Does Shun Mook market cartridges??? ;8^) /nt\ - Opus 33 1/3 13:15:47 11/02/18 (0)
  • Well... - slapshot 10:37:56 11/02/18 (3)
    • We've had a bit of fun but ultimately.. - PAR 08:52:16 11/03/18 (2)
      • RE: We've had a bit of fun but ultimately.. - Wojciech 17:45:01 11/04/18 (1)
        • RE: We've had a bit of fun but ultimately.. - cactuscowboy@bresnan.net 11:13:18 11/07/18 (0)
• Jensen step up transformer - audioeyedoc 09:40:45 11/02/18 (2)
  • RE: Jensen step up transformer - zelig 05:53:03 11/03/18 (1)
    • RE: Jensen step up transformer - audioeyedoc 12:17:17 11/04/18 (0)
• Reich: 'Different Trains, Electric Counterpoint' back on re-mastered vinyl. - jusbe 09:08:11 11/02/18 (0)
• Empire 598 convert to 220V - dd168168 21:34:39 11/01/18 (5)
  • RE: Empire 598 convert to 220V - empirelvr 09:10:06 11/05/18 (0)
  • RE: Empire 598 convert to 220V - Awe-d-o-file 14:16:18 11/02/18 (0)
  • Yes- that is exactly what you have to do - Ralph 12:20:53 11/02/18 (2)
    • RE: Yes- that is exactly what you have to do - dd168168 14:01:00 11/02/18 (1)
      • RE: Yes- that is exactly what you have to do - Ralph 08:42:03 11/05/18 (0)
• If only one could select a cartridge at a shop like this with your same system, or in this case, lips. - kitch29 18:00:35 11/01/18 (5)
  • the Brannen just kills the others... (nt) - Dave B 13:03:36 11/02/18 (0)
  • that would be quite difficult - NuWave 08:46:45 11/02/18 (0)
  • Dunno about cartridges... - FenderLover 18:47:48 11/01/18 (2)
    • RE: All true, but - kitch29 03:53:42 11/02/18 (0)
    • 100% agree. nt - jusbe 02:44:07 11/02/18 (0)
• Hana ML microline cartridge - FenderLover 17:43:36 11/01/18 (1)
  • RE: Hana ML microline cartridge - Kel34 15:32:39 01/17/19 (0)
• ART-9 vs Benz Micro SL - jim o 16:47:46 11/01/18 (0)
• Sometimes, you just get lucky. Like yesterday at HPB. - ghost of olddude55 14:14:40 11/01/18 (7)
  • RE: Sometimes, you just get lucky. Like yesterday at HPB. - John-from Seattle 13:49:42 11/02/18 (0)
  • Nice Score! - vinyl survivor 16:43:46 11/01/18 (0)
  • I can imagine your heart rate when you spotted those. My Half - alaskahiatt 15:35:08 11/01/18 (4)
    • We only went there to kill time. - ghost of olddude55 02:58:08 11/02/18 (3)
      • Serendipity... - musetap 13:55:10 11/04/18 (0)
      • RE: We only went there to kill time. - dean_martin 14:33:55 11/03/18 (0)
      • Nice. :^). nt - alaskahiatt 14:22:06 11/03/18 (0)
• Which one? - Rega Planar 2 (new one) vs. Thorens TD-203 - mjcmt 05:01:45 11/01/18 (19)
  • RE: Which one? - I just purchased a Thorens TD-203 - mjcmt 03:57:26 11/12/18 (0)
  • Some advice if you decide to get the Rega. - ghost of olddude55 16:33:57 11/02/18 (4)
    • More advice - Ross 14:38:48 11/10/18 (0)
    • RE: Some advice if you decide to get the Rega. - ecl876 17:30:58 11/02/18 (2)
      • Seems to me, there's value in it regardless. - ghost of olddude55 04:19:12 11/03/18 (0)
      • RE: Some advice if you decide to get the Rega. - John-from Seattle 20:14:29 11/02/18 (0)
  • Spent a week with the Rega P2... - MaxwellP 17:45:08 11/01/18 (0)
  • RE: Which one? - Rega Planar 2 (new one) vs. Thorens TD-203 - PAR 10:39:43 11/01/18 (0)
  • I see used RP3's on eBay for $750 incl. shipping - jedrider 09:13:35 11/01/18 (2)
    • RE: I see used RP3's on eBay for $750 incl. shipping - mjcmt 10:29:21 11/01/18 (1)
      • Sorry. Grey and White. - jedrider 11:37:51 11/01/18 (0)
  • RE: Which one? - Rega Planar 2 (new one) vs. Thorens TD-203 - Mr Peabody 08:19:24 11/01/18 (0)
  • RE: Which one? - Rega Planar 2 (new one) vs. Thorens TD-203 - John-from Seattle 06:58:41 11/01/18 (6)
    • RE: Which one? - Rega Planar 2 (new one) vs. Thorens TD-203 - mjcmt 10:51:19 11/01/18 (1)
      • RE: Which one? - Rega Planar 2 (new one) vs. Thorens TD-203 - John-from Seattle 11:14:20 11/01/18 (0)
    • RE: Which one? - Rega Planar 2 (new one) vs. Thorens TD-203 - Mick Wolfe 10:23:28 11/01/18 (3)
      • RE: Which one? - Rega Planar 2 (new one) vs. Thorens TD-203 - SoundMann 17:44:55 11/01/18 (0)
      • RE: Which one? - Rega Planar 2 (new one) vs. Thorens TD-203 - mjcmt 10:30:43 11/01/18 (1)
        • RE: Which one? - Rega Planar 2 (new one) vs. Thorens TD-203 - Mick Wolfe 10:36:16 11/01/18 (0)
• Realistic RXT4 / Shure V15/!V? body but sans stylus! Is it worth anything / can I find a Type IV assembly anywhere? - Timbo in Oz 23:54:33 10/31/18 (3)
  • Flood's rec. is one possibility - Story 03:55:59 11/01/18 (0)
  • RE: Realistic RXT4 / Shure V15/!V? body but sans stylus! Is it worth anything / can I find a Type IV assembly anywhere? - flood2 00:06:16 11/01/18 (1)
    • RE: Realistic RXT4 / Shure V15/!V? body but sans stylus! Is it worth anything / can I find a Type IV assembly anywhere? - Crazy Dave 03:49:00 11/01/18 (0)
• Album playability - bob24 14:33:34 10/31/18 (17)
  • Damage to stylus? - cactuscowboy@bresnan.net 10:54:34 11/07/18 (0)
  • RE: Album playability - newvinyl 08:59:44 11/07/18 (0)
  • RE: Album playability - Nadguy 07:59:04 11/07/18 (0)
  • Get a shibata style cartridge - theaudiohiffle 14:59:26 11/04/18 (0)
  • Dual 1209 - ghost of olddude55 03:02:31 11/01/18 (2)
    • RE: Dual 1209 - orthophonic 11:34:12 11/01/18 (1)
      • But even the diamonds wore out. And they had to be replaced. - ghost of olddude55 11:49:42 11/01/18 (0)
  • RE: Album playability - John-from Seattle 17:20:53 10/31/18 (2)
    • RE: Album playability - bob24 17:57:15 10/31/18 (1)
      • RE: Album playability - John-from Seattle 18:22:56 10/31/18 (0)
  • RE: Album playability - John Elison 16:44:26 10/31/18 (1)
    • RE: Album playability - bob24 17:10:32 10/31/18 (0)
  • RE: Album playability - PAR 16:25:08 10/31/18 (4)
    • RE: Album playability - bob24 16:45:50 10/31/18 (0)
    • Buy a throw away cartridge - jedrider 16:36:21 10/31/18 (2)
      • RE: Buy a throw away cartridge - PAR 16:56:00 10/31/18 (1)
        • OK - jedrider 18:37:29 10/31/18 (0)
• DV 20XL sell or rebuild and sell - kwillisjr 13:03:32 10/31/18 (3)
  • If I were in the market for a DV 20XL - 1973shovel 05:17:23 11/01/18 (1)
    • Agreed. /nm/ - tketcham 05:54:45 11/01/18 (0)
  • RE: DV 20XL sell or rebuild and sell - SoundMann 17:38:00 10/31/18 (0)
• Cream - 3db 05:34:08 10/31/18 (10)
  • RE: Cream - Supercool! 12:33:48 10/31/18 (0)
  • "Disraeli Gears At The BBC" - FenderLover 06:46:41 10/31/18 (0)
  • If you're a Cream fan and you haven't seen it yet... - ghost of olddude55 06:44:14 10/31/18 (7)
    • RE: If you're a Cream fan and you haven't seen it yet... - bob24 13:08:14 10/31/18 (0)
    • RE: If you're a Cream fan and you haven't seen it yet... - radiodaddy 12:40:22 10/31/18 (0)
    • RE: If you're a Cream fan and you haven't seen it yet... - Ruinthere@sbcglobal.net 11:38:23 10/31/18 (2)
      • RE: If you're a Cream fan and you haven't seen it yet... - PAR 16:37:18 10/31/18 (0)
      • RE: If you're a Cream fan and you haven't seen it yet... - bob24 13:15:13 10/31/18 (0)
    • Thanks, for information - FenderLover 06:54:20 10/31/18 (1)
      • Clapton's Gibson SG "Fool" in action! - FenderLover 06:58:45 10/31/18 (0)
• SL1200 arm base/helicoid tilt relationship - flood2 00:30:28 10/31/18 (24)
  • Wow... - dee eye why 06:12:15 10/31/18 (23)
    • RE: Wow... - PAR 07:44:31 10/31/18 (0)
    • RE: Wow... - John Elison 07:29:38 10/31/18 (21)
      • RE: Wow... - flood2 13:13:59 10/31/18 (5)
        • I never used the lock. - ghost of olddude55 04:50:06 11/03/18 (0)
        • RE: Wow... - John Elison 15:15:26 10/31/18 (3)
          • RE: Wow... - flood2 16:16:11 10/31/18 (2)
            • RE: Wow... - Crazy Dave 03:55:06 11/01/18 (1)
              • RE: Wow... - flood2 00:23:16 11/02/18 (0)
      • RE: Wow... - Supercool! 07:43:00 10/31/18 (14)
        • RE: Wow... - Supercool! 07:48:16 10/31/18 (13)
          • RE: Wow... - John Elison 07:52:38 10/31/18 (12)
            • RE: Wow... - Supercool! 13:31:47 10/31/18 (11)
              • RE: Wow... - flood2 19:36:07 10/31/18 (9)
                • RE: Wow... - Crazy Dave 03:59:42 11/01/18 (1)
                  • RE: Wow... - flood2 23:36:21 11/01/18 (0)
                • RE: Wow... - John Elison 01:21:57 11/01/18 (6)
                  • RE: Wow... - flood2 20:54:14 11/01/18 (5)
                    • RE: Wow... - John Elison 00:54:10 11/02/18 (4)
                      • RE: Wow... - flood2 16:02:24 11/06/18 (3)
                        • Sorry to revisit this but.. - Supercool! 03:40:35 11/20/18 (2)
                          • RE: Sorry to revisit this but.. - flood2 01:22:31 11/21/18 (1)
                            • RE: Sorry to revisit this but.. - Supercool! 03:02:01 11/21/18 (0)
              • RE: Wow... - Supercool! 13:38:02 10/31/18 (0)
• SME-IV maybe someone can explain how the current price is 6x - kavakidd 23:03:46 10/30/18 (6)
  • I payed $995 in 1987 - SuperSonic 19:21:09 10/31/18 (2)
    • RE: I payed $995 in 1987 - PAR 20:37:12 10/31/18 (1)
      • I sold my used IV for $1350 to a Japanese person in 2009. - SuperSonic 19:29:43 11/02/18 (0)
  • RE: SME-IV maybe someone can explain how the current price is 6x - PAR 00:55:37 10/31/18 (0)
  • RE: SME-IV maybe someone can explain how the current price is 6x - beach cruiser 23:23:53 10/30/18 (1)
    • Why answer - kavakidd 15:51:31 10/31/18 (0)
• Soundsmith cantilever mod on Denon DL-103R - FenderLover 17:30:16 10/30/18 (1)
  • Benz SLR - MikeWI 12:30:51 10/31/18 (0)
• Spinnin' - dean_martin 17:13:52 10/30/18 (9)
  • Two more - dean_martin 17:08:50 11/08/18 (0)
  • Ghost Of Oldude55 inspired me.. - viridian 18:51:34 10/30/18 (7)
    • I've looked for Finzi at the record store. Zilch. - ghost of olddude55 02:32:47 10/31/18 (6)
      • As a collector, the hunt is as much fun as getting the record, IMHO.... - viridian 06:47:40 10/31/18 (5)
        • The hunt... - ghost of olddude55 11:28:41 10/31/18 (4)
          • RE: The hunt... - dean_martin 13:10:22 10/31/18 (3)
            • Many species now endangered or near extinction.... - viridian 08:22:26 11/01/18 (2)
              • Until, of course....... - vinyl1 15:51:59 11/01/18 (1)
                • A bit of schadenfreude there....nt - viridian 19:44:12 11/01/18 (0)
• Technics and KAB mods - bob24 16:01:03 10/30/18 (16)
  • RE: Technics and KAB mods - bill_stevenson@bellsouth.net 12:22:18 11/01/18 (0)
  • On my old SL-1210mkII, the only mod that made a difference was changing the tone arm. - ghost of olddude55 14:14:39 10/31/18 (0)
  • RE: Technics and KAB mods - beach cruiser 23:15:46 10/30/18 (4)
    • RE: Technics and KAB mods - bob24 06:25:27 10/31/18 (0)
    • RE: Technics and KAB mods - John Elison 05:44:05 10/31/18 (2)
      • I know enough to respect your opinions. - volunteer 07:18:49 10/31/18 (1)
        • RE: I know enough to respect your opinions. - John Elison 07:48:59 10/31/18 (0)
  • RE: Technics and KAB mods - John Elison 19:47:33 10/30/18 (2)
    • Agree with JE - Frank Sol 06:30:41 10/31/18 (0)
    • RE: Technics and KAB mods - bob24 22:07:01 10/30/18 (0)
  • RE: Technics and KAB mods - Andy43 18:59:39 10/30/18 (0)
  • RE: Technics and KAB mods - stereo5 17:46:42 10/30/18 (0)
  • While the KAB mods are certainly worthwhile on the previous gen Technics decks, - Opus 33 1/3 17:11:24 10/30/18 (0)
  • If you decide to get the 1200G, listen to it for a while before making any mods, it just might be ... - J. S. Bach 16:20:12 10/30/18 (2)
    • RE: If you decide to get the 1200G, listen to it for a while before making any mods, it just might be ... - bob24 16:42:07 10/30/18 (1)
      • I too, would leave it OEM for a good while, before evaluating aftermarket mods. - FenderLover 16:56:39 10/30/18 (0)
• Finally doing the Dual 622 plinth - Awe-d-o-file 13:30:58 10/30/18 (1)
  • Got it - Awe-d-o-file 18:50:05 10/30/18 (0)
• The thrill is gone - Munkie_NL 11:48:28 10/30/18 (8)
  • The Black Cube SE is still available - EdAInWestOC 08:30:07 10/31/18 (0)
  • RE: The thrill is gone - Munkie_NL 08:17:11 10/31/18 (0)
  • RE: The thrill is gone - MAS 17:13:32 10/30/18 (0)
  • Your tech should just install a socket in the... - viridian 12:30:10 10/30/18 (0)
  • RE: The thrill is gone - docw 12:12:12 10/30/18 (0)
  • RE: The thrill is gone - Lew 12:10:28 10/30/18 (0)
  • RE: The thrill is gone - ghost of olddude55 11:51:12 10/30/18 (0)
  • RE: The thrill is gone - docw 11:51:08 10/30/18 (0)
• Hold the Presses! - TGR 17:56:55 10/29/18 (10)
  • The most 'intense" 1812 I know is Muti's on EMI, treated as if it were the Eroica. nt - jdaniel@jps.net 07:53:42 10/31/18 (0)
  • RE: Hold the Presses! - docw 14:25:53 10/30/18 (1)
    • Bernstein and the DG Beethoven cycle - TGR 16:45:47 10/30/18 (0)
  • Yeah - that Kunzel 1812 is dullsville, despite the cannon! - Chris from Lafayette 10:36:09 10/30/18 (4)
    • I, too, was once a multichannel guy.... - TGR 13:10:36 10/30/18 (3)
      • Yes - I remember how you went back to the dark side! [nt] ;-) - Chris from Lafayette 20:43:39 10/30/18 (2)
        • Actually, I view it as.... - TGR 07:43:53 10/31/18 (1)
          • As I do for you! ;-) - Chris from Lafayette 10:54:10 10/31/18 (0)
  • RE: Hold the Presses! - Alex M 01:18:26 10/30/18 (1)
    • RE: Hold the Presses! - PAR 02:35:15 10/30/18 (0)
• War - "World Is A Ghetto" - FenderLover 15:16:24 10/29/18 (8)
  • RE: War - "World Is A Ghetto" - electrovice 12:17:13 10/31/18 (0)
  • missing from my collection. - beach cruiser 23:39:09 10/30/18 (0)
  • All Day Music - Awe-d-o-file 21:51:09 10/29/18 (0)
  • Great stuff... - musetap 21:05:38 10/29/18 (2)
    • Rhythm lines - FenderLover 07:52:43 10/31/18 (0)
    • +1 - M3 lover 16:09:32 10/30/18 (0)
  • "Slippin Into Darkness" - Cougar 20:45:29 10/29/18 (0)
  • RE: War - "World Is A Ghetto" - doak 19:32:58 10/29/18 (0)
• Going Bax hunting tomorrow. - ghost of olddude55 10:19:31 10/29/18 (13)
  • Yes, Lyrita.. - PAR 02:53:43 10/30/18 (1)
    • Found Symphony No. 1 and the Boult LP but on MHS. - ghost of olddude55 08:27:15 10/30/18 (0)
  • Anything on the Lyrita label... - Ivan303 18:43:18 10/29/18 (0)
  • Yes - but that Barbirolli recording is almost is its own class! [nt] ;-) - Chris from Lafayette 11:42:52 10/29/18 (0)
  • Lyrita recorded most, or all, of the symphonies in excellent sound.. - viridian 10:59:34 10/29/18 (8)
    • I believe 1 or 2 were missed - TGR 12:02:15 10/29/18 (2)
      • I like Chandos. - ghost of olddude55 13:59:16 10/29/18 (0)
      • Thank you for the insights..... - viridian 12:28:10 10/29/18 (0)
    • Hopefully, I can find them. - ghost of olddude55 11:40:42 10/29/18 (0)
    • Yep, I have 2 of the Lyrita. Also have 3 Bax Symph. LP's on MHS label that have good sound. nt - Rick W 11:05:23 10/29/18 (3)
      • Would you believe a Library Record on MHS of Bax 2 ... - Dave Pogue 05:31:55 10/30/18 (0)
      • Yep, if you find anything on MHS... - Ivan303 18:46:40 10/29/18 (1)
        • I'll probably have an easier time finding MHS. - ghost of olddude55 03:03:27 10/30/18 (0)
• Condition rating of used vinyl - Mick Wolfe 10:48:58 10/28/18 (21)
  • "Sounds Like" it should have been rated "VG" - Ross 18:13:05 10/30/18 (0)
  • Really simple... - John N 10:11:13 10/29/18 (1)
    • RE: Really simple... - Mick Wolfe 10:27:47 10/29/18 (0)
  • My theory is that eBay sellers hate to use less than VG+. Anything less - alaskahiatt 19:48:13 10/28/18 (3)
    • RE: My theory is that eBay sellers hate to use less than VG+. Anything less - Mick Wolfe 21:22:35 10/28/18 (2)
      • I agree with your rating, but I couldn't find my Goldmine book tonight - alaskahiatt 21:57:52 10/28/18 (1)
        • RE: I agree with your rating, but I couldn't find my Goldmine book tonight - Mick Wolfe 22:34:28 10/28/18 (0)
  • When Shopping: Bottom of the barrel.. expect erm.. misrepresentations - bare 18:54:50 10/28/18 (1)
    • RE: When Shopping: Bottom of the barrel.. expect erm.. misrepresentations - Mick Wolfe 19:30:28 10/28/18 (0)
  • RE: Condition rating of used vinyl - Jeffrey Lee 18:37:46 10/28/18 (2)
    • RE: Condition rating of used vinyl - Mick Wolfe 19:26:17 10/28/18 (1)
      • RE: Condition rating of used vinyl - Jeffrey Lee 20:33:14 10/31/18 (0)
  • rating of used vinyl - hifitommy 18:06:06 10/28/18 (0)
  • That's why i play grade all the LP's i sell...it takes - popsy 17:28:24 10/28/18 (3)
    • Same (nt) - Vinyl Valet 07:00:10 10/29/18 (0)
    • RE: That's why i play grade all the LP's i sell...it takes - John-from Seattle 05:37:49 10/29/18 (0)
    • RE: That's why i play grade all the LP's i sell...it takes - Mick Wolfe 21:28:20 10/28/18 (0)
  • Goldmine... - musetap 11:54:30 10/28/18 (3)
    • RE: Goldmine... - Mick Wolfe 12:37:53 10/28/18 (2)
      • Grading isn't a science and people make mistakes... - musetap 14:41:52 10/28/18 (1)
        • RE: Grading isn't a science and people make mistakes... - John-from Seattle 14:51:56 10/28/18 (0)
• New turntable or rewire arm - Rockethead26 18:06:37 10/27/18 (77)
  • RE: New turntable or rewire arm - Rockethead26 09:10:14 11/04/18 (2)
    • RE: New turntable or rewire arm - Sturgus 13:47:19 11/05/18 (1)
      • RE: New turntable or rewire arm - Rockethead26 15:26:46 11/06/18 (0)
  • Update on Continuity Check - Rockethead26 14:02:51 11/03/18 (5)
    • RE: Update on Continuity Check - Rockethead26 14:56:22 11/03/18 (4)
      • that's what mine did - NuWave 08:38:33 11/05/18 (3)
        • RE: that's what mine did - Rockethead26 09:07:23 11/05/18 (2)
          • RE: that's what mine did - NuWave 14:02:29 11/05/18 (1)
            • RE: that's what mine did - Rockethead26 15:30:22 11/06/18 (0)
  • If you like your present rig, then rewire the arm. )MT( - J. S. Bach 06:50:21 10/30/18 (0)
  • If you are able to tinker........ - NuWave 09:52:39 10/29/18 (5)
    • RE: If you are able to tinker........ - Rockethead26 10:10:47 10/29/18 (4)
      • that's what mine did........ - NuWave 10:16:34 10/29/18 (3)
        • RE: that's what mine did........ - Rockethead26 10:45:37 10/29/18 (2)
          • RE: that's what mine did........ - NuWave 13:11:44 10/29/18 (1)
            • RE: that's what mine did........ - Rockethead26 14:10:30 10/29/18 (0)
  • RE: New turntable or rewire arm - docw 09:36:19 10/29/18 (13)
    • RE: New turntable or rewire arm - Rockethead26 09:59:27 10/29/18 (12)
      • RE: New turntable or rewire arm - docw 11:00:00 10/29/18 (11)
        • RE: New turntable or rewire arm - Rockethead26 11:44:49 10/29/18 (10)
          • RE: New turntable or rewire arm - docw 17:45:28 10/29/18 (5)
            • RE: New turntable or rewire arm - Rockethead26 22:48:22 10/29/18 (4)
              • can't really look at it like that - NuWave 09:54:43 10/30/18 (3)
                • RE: can't really look at it like that - Rockethead26 16:48:34 10/30/18 (2)
                  • check that cable! - NuWave 15:37:09 10/31/18 (1)
                    • RE: check that cable! - Rockethead26 16:13:15 10/31/18 (0)
          • RE: New turntable or rewire arm - docw 17:30:29 10/29/18 (2)
            • RE: New turntable or rewire arm - Rockethead26 22:51:25 10/29/18 (1)
              • Addendums - docw 07:22:34 10/30/18 (0)
          • that's the same number that stops me too - NuWave 13:20:32 10/29/18 (0)
  • That is a quality turntable you have there. - ppopp 05:54:36 10/29/18 (1)
    • RE: That is a quality turntable you have there. - Rockethead26 09:50:28 10/29/18 (0)
  • Buy a new Technics SL-1200GR or SL-1210GR... - John Elison 21:55:00 10/28/18 (1)
    • RE: Buy a new Technics SL-1200GR or SL-1210GR... - Rockethead26 22:19:21 10/28/18 (0)
  • RE: New turntable or rewire arm - Blackdog 15:44:03 10/28/18 (3)
    • RE: New turntable or rewire arm - Rockethead26 16:56:32 10/28/18 (2)
      • RE: New turntable or rewire arm - Blackdog 18:20:22 10/28/18 (1)
        • RE: New turntable or rewire arm - Rockethead26 19:18:43 10/28/18 (0)
  • Eat the cake, drink the wine and buy a new table just because. - volunteer 15:41:13 10/28/18 (9)
    • RE: Eat the cake, drink the wine and buy a new table just because. - Rockethead26 16:51:51 10/28/18 (8)
      • RE: Eat the cake, drink the wine and buy a new table just because. - edgilfus 17:01:44 10/28/18 (7)
        • RE: Eat the cake, drink the wine and buy a new table just because. - Rockethead26 17:26:22 10/28/18 (6)
          • RE: Eat the cake, drink the wine and buy a new table just because. - Ruinthere@sbcglobal.net 17:07:28 10/29/18 (1)
            • RE: Eat the cake, drink the wine and buy a new table just because. - Rockethead26 22:41:17 10/29/18 (0)
          • You mean you guys don't have to bring your stuff in the back door and into the basement? nt - alaskahiatt 22:04:25 10/28/18 (3)
            • RE: You mean you guys don't have to bring your stuff in the back door and into the basement? nt - volunteer 04:46:03 10/29/18 (2)
              • I suppose you're going to tell me that you are still married too. ;^). nt - alaskahiatt 17:34:36 10/29/18 (1)
                • RE: I suppose you're going to tell me that you are still married too. ;^). nt - volunteer 09:49:13 10/30/18 (0)
  • RE: New turntable or rewire arm - Joe Backer 07:42:02 10/28/18 (10)
    • eeewww - NuWave 10:04:52 10/29/18 (1)
      • RE: eeewww - Joe Backer 20:09:24 10/30/18 (0)
    • I may be a contrarian here but you have a good tonearm and deck - spindoctor 08:15:46 10/28/18 (5)
      • RE: I may be a contrarian here but you have a good tonearm and deck - Rockethead26 08:46:19 10/28/18 (4)
        • RE: I may be a contrarian here but you have a good tonearm and deck - spindoctor 15:37:53 10/28/18 (3)
          • RE: I may be a contrarian here but you have a good tonearm and deck - Rockethead26 07:03:30 10/29/18 (1)
            • RE: I may be a contrarian here but you have a good tonearm and deck - Rockethead26 07:23:16 10/30/18 (0)
          • RE: I may be a contrarian here but you have a good tonearm and deck - Rockethead26 16:47:13 10/28/18 (0)
    • RE: New turntable or rewire arm - Rockethead26 07:50:44 10/28/18 (1)
      • RE: New turntable or rewire arm - Joe Backer 20:08:23 10/30/18 (0)
  • RE: New turntable or rewire arm - ddarch 04:45:14 10/28/18 (5)
    • RE: New turntable or rewire arm - Rockethead26 07:13:48 10/28/18 (2)
      • RE: New turntable or rewire arm - PAR 08:34:57 10/28/18 (1)
        • RE: New turntable or rewire arm - Rockethead26 08:49:18 10/28/18 (0)
    • RE: machinist & what to do - Bill Way 04:59:24 10/28/18 (1)
      • RE: machinist & what to do - Rockethead26 07:19:59 10/28/18 (0)
  • RE: New turntable or rewire arm - Uncle Mike 03:59:39 10/28/18 (3)
    • RE: New turntable or rewire arm - Rockethead26 06:52:03 10/28/18 (2)
      • RE: New turntable or rewire arm - Uncle Mike 07:21:46 10/28/18 (1)
        • RE: New turntable or rewire arm - Rockethead26 07:26:19 10/28/18 (0)
  • RE: New turntable or rewire arm - afro18 19:27:48 10/27/18 (5)
    • RE: New turntable or rewire arm - Rockethead26 20:59:43 10/27/18 (4)
      • RE: New turntable or rewire arm - BCR 03:45:11 10/28/18 (1)
        • RE: New turntable or rewire arm - Rockethead26 06:47:55 10/28/18 (0)
      • RE: New turntable or rewire arm - PAR 00:48:58 10/28/18 (1)
        • RE: New turntable or rewire arm - Rockethead26 06:43:15 10/28/18 (0)
  • RE: New turntable or rewire arm - stereo5 18:17:04 10/27/18 (1)
    • RE: New turntable or rewire arm - Rockethead26 20:43:47 10/27/18 (0)
• Mozart morning - ghost of olddude55 04:41:54 10/27/18 (4)
  • Is that like a Chelsea morning only in the USA??? N.t - spindoctor 06:21:22 10/27/18 (3)
    • One of my favorite Joni Mitchell tunes - FenderLover 07:07:16 10/27/18 (0)
    • I have it on good authority... - ghost of olddude55 06:30:39 10/27/18 (1)
      • RE: I have it on good authority... - spindoctor 14:23:19 10/27/18 (0)
• Question for EPA-100 owners. - krenzler 02:03:51 10/27/18 (8)
  • RE: EPA-100 - M3 lover 10:36:30 10/29/18 (1)
    • RE: EPA-100 - krenzler 00:24:46 10/30/18 (0)
  • sorta what Jappa said - Lew 20:19:19 10/28/18 (1)
    • audiophilia nervosa indeed! :) NT - krenzler 22:12:10 10/28/18 (0)
  • RE: Question for EPA-100 owners. - Japa Fett 13:41:54 10/28/18 (3)
    • RE: Question for EPA-100 owners. - krenzler 22:10:54 10/28/18 (2)
      • RE: Question for EPA-100 owners. - Japa Fett 23:02:42 10/29/18 (1)
        • Thanks. Yes SH-100G1 indeed. NT - krenzler 00:21:49 10/30/18 (0)
• Album cover with the most variations - scrbblkng 21:22:42 10/26/18 (8)
  • RE: Album cover with the most variations - welly 05:04:15 10/29/18 (0)
  • Major label, right?... - musetap 12:40:23 10/27/18 (0)
  • You're gonna need to do a lot of research... - radiodaddy 09:32:43 10/27/18 (1)
    • RE: You're gonna need to do a lot of research... - scrbblkng 12:24:00 10/27/18 (0)
  • RE: Album cover with the most variations - samstone 07:38:23 10/27/18 (3)
    • RE: Album cover with the most variations - scrbblkng 12:27:00 10/27/18 (2)
      • Check out this site... - musetap 12:44:26 10/27/18 (1)
        • RE: Check out this site... - scrbblkng 14:23:18 10/27/18 (0)
• Spinning Adelstein - docw 11:16:43 10/26/18 (0)
• How to set phono pre loading with an adjustable step-up device? - strhd07 05:56:18 10/26/18 (4)
  • RE: How to set phono pre loading with an adjustable step-up device? - strhd07 14:21:10 10/26/18 (1)
    • RE: Can you tell us what you've decided to do ... - andyr 19:58:56 10/30/18 (0)
  • Why? - PAR 13:53:52 10/26/18 (0)
  • RE: How to set phono pre loading with an adjustable step-up device? - Shep 07:33:13 10/26/18 (0)
• Twice retail?! - volunteer 03:47:03 10/26/18 (18)
  • it's Ebay.. 'nuff said Mate. - bare 10:00:43 10/26/18 (8)
    • RE: Ebay and Walmart, beneath many of us - kitch29 12:31:02 10/26/18 (5)
      • RE: Ebay and Walmart, beneath many of us - volunteer 12:36:07 10/26/18 (4)
        • RE: Walmart - Inmate51 07:21:48 10/27/18 (2)
          • RE: Walmart - volunteer 10:38:16 10/27/18 (0)
          • +1 )MT( - J. S. Bach 07:51:56 10/27/18 (0)
        • RE: Ebay and Walmart, beneath many of us - John-from Seattle 13:35:02 10/26/18 (0)
    • RE: it's Ebay.. 'nuff said Mate. - volunteer 10:29:49 10/26/18 (1)
      • RE: it's Ebay.. 'nuff said Mate. - John-from Seattle 06:08:10 10/27/18 (0)
  • typical Ebay middleman, very common . . . - peteSF 06:43:47 10/26/18 (0)
  • Like my local craigslist. - ghost of olddude55 04:46:44 10/26/18 (7)
    • Craig list experience - M3 lover 11:47:29 10/26/18 (0)
    • Craigslist in My area is sketchy - bare 09:58:26 10/26/18 (2)
      • Sadly, scams come with the territory. - Mr. Dick Hertz 13:33:43 10/26/18 (0)
      • To be fair, I got my amp from Craigslist. - ghost of olddude55 12:48:53 10/26/18 (0)
    • RE: Like my local craigslist. Such a deal! - jaynemo 05:05:37 10/26/18 (2)
      • Well, it does have a certain pedigree, but... - Mr. Dick Hertz 08:50:06 10/26/18 (1)
        • RE: Well, it does have a certain pedigree, but... - jaynemo 09:06:24 10/26/18 (0)
• Comments on Rega vs Project - HD Audio 21:24:18 10/24/18 (37)
  • RE: Comments on Rega vs Project - Munkie_NL 02:15:39 10/27/18 (0)
  • RE: Comments on Rega vs Project - HD Audio 07:30:33 10/26/18 (0)
  • I buy whatever I can get on sale - jedrider 23:01:51 10/25/18 (0)
  • No experience with Rega, but... - Mr. Dick Hertz 12:50:00 10/25/18 (18)
    • RE: No experience with Rega, but... - John-from Seattle 12:53:09 10/25/18 (17)
      • Does the RP-3 use double-sided foam poster tape to mount the motor? - ghost of olddude55 14:06:22 10/25/18 (16)
        • RE: Does the RP-3 use double-sided foam poster tape to mount the motor? - John-from Seattle 14:58:06 10/25/18 (2)
          • Got mine in 2003. - ghost of olddude55 15:08:48 10/25/18 (1)
            • RE: Got mine in 2003. - John-from Seattle 15:40:33 10/25/18 (0)
        • RE: Does the RP-3 use double-sided foam poster tape to mount the motor? - volunteer 14:24:28 10/25/18 (12)
          • I remember incorrectly. They went from rubber band mounting - volunteer 17:35:20 10/25/18 (5)
            • You don't ever want to unstick the tape. - ghost of olddude55 02:47:02 10/26/18 (4)
              • RE: You don't ever want to unstick the tape. - volunteer 03:13:29 10/26/18 (3)
                • As far as I know... - ghost of olddude55 03:44:11 10/26/18 (2)
                  • That would sure sour me on the brand. - volunteer 03:52:21 10/26/18 (1)
                    • Running too fast wasn't an issue for me. - ghost of olddude55 04:35:38 10/26/18 (0)
          • That's the RP-3? - ghost of olddude55 14:32:23 10/25/18 (5)
            • RE: That's the RP-3? - volunteer 14:37:53 10/25/18 (4)
              • You may have guessed... - ghost of olddude55 14:38:59 10/25/18 (3)
                • RE: You may have guessed... - volunteer 14:41:52 10/25/18 (2)
                  • I want to like them. - ghost of olddude55 14:43:27 10/25/18 (1)
                    • RE: I want to like them. - volunteer 14:51:57 10/25/18 (0)
  • Why only these two brands? - ppopp 07:41:51 10/25/18 (1)
    • RE: Why only these two brands? - John-from Seattle 08:48:38 10/25/18 (0)
  • Schiit... - Vinyl Valet 06:30:47 10/25/18 (5)
    • RE: Schiit...dustcover - hifitommy 20:19:05 10/25/18 (4)
      • I prefer the Michell... - Vinyl Valet 06:19:12 10/26/18 (3)
        • RE: I prefer... - hifitommy 08:18:44 10/27/18 (2)
          • RE: I prefer... - Vinyl Valet 08:25:32 10/27/18 (1)
            • RE: I too - hifitommy 16:37:09 10/27/18 (0)
  • RE: Comments on Rega vs Project - Erocka2000 06:26:02 10/25/18 (1)
    • RE: Comments on Rega vs Project - John-from Seattle 08:44:53 10/25/18 (0)
  • RE: Comments on Rega vs Project - John-from Seattle 05:30:30 10/25/18 (0)
  • RE: Comments on Rega vs Project - BPoletti 22:00:01 10/24/18 (3)
    • RE: Comments on Rega vs Project - ecl876 10:18:51 10/25/18 (0)
    • Hands-down? - ppopp 07:38:20 10/25/18 (1)
      • RE: Hands-down? - BPoletti 21:19:26 10/26/18 (0)
• Great TT mat! - Awe-d-o-file 20:44:55 10/24/18 (0)
• vinyl engine not responding - Chef Henry 13:02:41 10/24/18 (5)
  • Worked fine for me just now. )MT( - J. S. Bach 08:42:23 10/25/18 (0)
  • RE: vinyl engine not responding - rhmbus 22:58:29 10/24/18 (0)
  • V...E...R...Y......S...L...O...W - BPoletti 17:43:41 10/24/18 (0)
  • RE: vinyl engine not responding - John-from Seattle 16:02:09 10/24/18 (0)
  • working fine here...nt - bruckner9 13:20:27 10/24/18 (0)
• buying an entry level TT for my daughter - LousyTourist 05:48:16 10/24/18 (28)
  • RE: buying an entry level TT for my daughter - docw 12:59:15 10/25/18 (0)
  • If she doesn't have a lot of LPs... - ghost of olddude55 03:10:36 10/25/18 (0)
  • TT for my daughter - hifitommy 15:30:50 10/24/18 (3)
    • Aura Turntable - DanWilson 15:41:31 10/26/18 (1)
      • RE: And so ....? - andyr 20:01:56 10/30/18 (0)
    • DC controlled with speed change at the pus of a button, 78 speed and built in phonostage. - volunteer 04:09:48 10/25/18 (0)
  • On a budget, stick to belt drive ... - reelsmith. 15:21:29 10/24/18 (0)
  • RE: buying an entry level TT for my daughter - py272 11:55:10 10/24/18 (0)
  • My own 2 cents worth - John-from Seattle 10:25:51 10/24/18 (4)
    • My record store friend has received excellent comments about the U-Turn Orbit. - alaskahiatt 23:22:03 10/25/18 (3)
      • RE: My record store friend has received excellent comments about the U-Turn Orbit. - John-from Seattle 06:44:36 10/26/18 (2)
        • Yeah, I just thought it would be good value for a new table for the OP's daughter. nt - alaskahiatt 12:59:06 10/26/18 (1)
          • RE: Yeah, I just thought it would be good value for a new table for the OP's daughter. nt - John-from Seattle 13:31:47 10/26/18 (0)
  • Advice? - Inmate51 09:58:15 10/24/18 (0)
  • RE: buying an entry level TT for my daughter - fstein 07:00:34 10/24/18 (1)
    • +1 - alaskahiatt 23:15:02 10/25/18 (0)
  • RE: buying an entry level TT for my daughter - volunteer 06:53:33 10/24/18 (3)
    • RE: buying an entry level TT for my daughter - John Elison 19:42:16 10/24/18 (1)
      • RE: buying an entry level TT for my daughter - volunteer 02:45:20 10/25/18 (0)
    • Feel the same about the Fluance RT-81 for $250. - Opus 33 1/3 17:09:38 10/24/18 (0)
  • I bought a Pro-ject Debut Carbon DC. - FenderLover 06:20:28 10/24/18 (1)
    • +1 - I bought a Pro-ject Debut Carbon DC. - caffeinator 08:57:20 10/26/18 (0)
  • my 2 cents.... - dee eye why 06:20:24 10/24/18 (5)
    • RE: my 2 cents.... - LousyTourist 07:20:51 10/24/18 (4)
      • RE: my 2 cents.... - M3Man 09:34:31 10/24/18 (3)
        • RE: my 2 cents.... - jsm71 12:08:10 10/24/18 (2)
          • RE: my 2 cents.... - Inmate51 14:15:48 10/24/18 (1)
            • RE: my 2 cents.... - jsm71 17:12:57 10/24/18 (0)
• Pioneer SA1000 - MC Step up - Misko78 08:57:30 10/23/18 (2)
  • RE: Pioneer SA1000 - MC Step up - Sondek 13:28:14 10/24/18 (1)
    • Yes, possible - kff 13:59:25 10/29/18 (0)
• Load Resistors for a Shelter MC Cartridge - jedrider 07:28:56 10/23/18 (17)
  • DigiKey for resistors - BPoletti 17:51:59 10/24/18 (0)
  • RE: Load Resistors for a Shelter MC Cartridge - Sondek 13:25:40 10/24/18 (0)
  • Shelter 901 works well with 100 ohms - Cougar 05:10:51 10/24/18 (0)
  • RE: Load Resistors for a Shelter MC Cartridge - PAR 08:34:38 10/23/18 (2)
    • Yes, selector switches - jedrider 22:39:38 10/23/18 (1)
      • RE: I assume that the sound is just a little brighter with higher values?? ... - andyr 20:14:16 10/30/18 (0)
  • RE: Load Resistors for a Shelter MC Cartridge - Lew 08:21:39 10/23/18 (2)
    • RE: Load Resistors for a Shelter MC Cartridge - jedrider 08:25:15 10/23/18 (1)
      • Have you tried higher and lower load resistors? - Lew 08:34:28 10/24/18 (0)
  • RE: Load Resistors for a Shelter MC Cartridge - Dave B 07:35:16 10/23/18 (7)
    • RE: Load Resistors for a Shelter MC Cartridge - jedrider 08:24:28 10/23/18 (6)
      • RE: Load Resistors for a Shelter MC Cartridge - Dave B 12:36:04 10/23/18 (5)
        • RE: Load Resistors for a Shelter MC Cartridge - jedrider 14:43:14 10/23/18 (4)
          • RE: Load Resistors for a Shelter MC Cartridge - PAR 16:49:38 10/23/18 (3)
            • RE: Load Resistors for a Shelter MC Cartridge - Dave B 19:19:20 10/23/18 (2)
              • RE: Load Resistors for a Shelter MC Cartridge - jedrider 22:45:46 10/23/18 (1)
                • RE: Load Resistors for a Shelter MC Cartridge - Dave B 04:33:04 10/24/18 (0)
• Step-up transformer grounding........dumb question - NuWave 16:07:44 10/22/18 (7)
  • Agree with JohnfromSeattle... - bruckner9 11:50:23 10/24/18 (1)
    • had to do both - NuWave 14:55:00 10/25/18 (0)
  • RE: Step-up transformer grounding........dumb question - gordguide 23:23:09 10/22/18 (1)
    • I'll do that! - NuWave 12:06:31 10/23/18 (0)
  • RE: Step-up transformer grounding........dumb question - John-from Seattle 18:35:30 10/22/18 (2)
    • that's what i did.......... - NuWave 09:42:24 10/23/18 (1)
      • RE: that's what i did.......... - John-from Seattle 09:46:57 10/23/18 (0)
• Dusty Springfield - Stay Awhile - FenderLover 08:47:54 10/22/18 (1)
  • RE: Dusty Springfield - Stay Awhile - Lman 20:56:24 10/24/18 (0)
• Denon DL-103R with Soundsmith re-tip - FenderLover 08:03:43 10/22/18 (28)
  • Tracking force - BPoletti 18:11:35 10/24/18 (5)
    • Soundsmith recommended 2.5 grams (n/t) - FenderLover 02:20:30 10/25/18 (1)
      • RE: Soundsmith recommended 2.5 grams (n/t) - BPoletti 21:15:45 10/26/18 (0)
    • RE: Tracking force - Tre' 19:09:53 10/24/18 (1)
      • RE: Tracking force - blake 07:45:51 10/25/18 (0)
    • RE: Tracking force - blake 18:52:09 10/24/18 (0)
  • Closeup photos - FenderLover 08:34:18 10/23/18 (8)
    • OEM Denon DL-103R - FenderLover 08:35:38 10/23/18 (7)
      • Quite a difference in SRA? - jusbe 10:00:00 10/23/18 (5)
        • RE: Quite a difference in SRA? - FenderLover 11:40:21 10/23/18 (4)
          • RE: Quite a difference in SRA? - Tre' 19:22:57 10/24/18 (2)
            • The suspension moves a bit more (n/t) - FenderLover 18:39:11 10/25/18 (1)
              • RE: The suspension moves a bit more (n/t) - Tre' 08:17:04 10/26/18 (0)
          • Nice. nt. - jusbe 12:24:37 10/23/18 (0)
      • Denon (Soundsmith) above record - FenderLover 08:42:59 10/23/18 (0)
  • what is the retip turn around time? thank you. (nt) - bouncy ball 19:56:53 10/22/18 (1)
    • Mine took 8 weeks. (n/t) - FenderLover 20:37:16 10/22/18 (0)
  • RE: Denon DL-103R with Soundsmith re-tip - golgi 14:16:57 10/22/18 (3)
    • RE: Denon DL-103R with Soundsmith re-tip - Mick Wolfe 09:13:26 10/23/18 (2)
      • www.denonaluminumbody.com - FenderLover 07:13:49 10/24/18 (1)
        • RE: www.denonaluminumbody.com - Mick Wolfe 09:18:44 10/24/18 (0)
  • RE: Denon DL-103R with Soundsmith re-tip - amandarae 12:13:03 10/22/18 (0)
  • RE: Denon DL-103R with Soundsmith re-tip - blade 11:17:46 10/22/18 (5)
    • Okay... first listening... - FenderLover 11:52:39 10/22/18 (4)
      • RE: Red Nail Polish... - Waxxy 12:36:15 10/22/18 (3)
        • Second listening... - FenderLover 13:41:16 10/22/18 (2)
          • Do you think it was worth it?...nt - EdAInWestOC 11:29:57 10/23/18 (1)
            • As of now... - FenderLover 11:48:15 10/23/18 (0)
• VPI 40th Anniversary Turntable / Arm....direct drive - Waxxy 16:29:07 10/21/18 (8)
  • VPI 40th Anniversary Turntable / Arm....direct drive - Basher52 07:57:04 10/22/18 (1)
    • RE: VPI 40th Anniversary Turntable / Arm....direct drive - blade 11:04:32 10/22/18 (0)
  • RE: VPI 40th Anniversary Turntable / Arm....direct drive - volunteer 16:54:51 10/21/18 (5)
    • RE: VPI 40th Anniversary Turntable / Arm....direct drive - Myles B. Astor 13:14:01 10/23/18 (3)
      • RE: VPI 40th Anniversary Turntable / Arm....direct drive - Supercool! 20:24:01 10/24/18 (2)
        • RE: VPI 40th Anniversary Turntable / Arm....direct drive - Erocka2000 06:34:18 10/26/18 (1)
          • RE: VPI 40th Anniversary Turntable / Arm....direct drive - Supercool! 10:12:08 10/26/18 (0)
    • Nice aesthetics! - FenderLover 06:42:21 10/22/18 (0)
• Style Council - FenderLover 15:39:36 10/21/18 (3)
  • RE: Style Council - digda_beat 03:10:46 10/22/18 (0)
  • +1 - jefe 19:15:14 10/21/18 (1)
    • Thanks! Nice Jam era tune (on vinyl) - FenderLover 06:01:24 10/22/18 (0)
• Using an AT95e while my Lyra is being looked at.... - Joe Backer 15:56:08 10/20/18 (33)
  • RE: Using an AT95e while my Lyra is being looked at.... - Capt. Z 04:00:27 10/27/18 (0)
  • Check out LP gears AT 95's - bare 17:15:24 10/22/18 (0)
  • I like it, too. - jupiterboy 10:45:50 10/21/18 (0)
  • RE: Using an AT95e while my Lyra is being looked at.... - fstein 07:43:06 10/21/18 (0)
  • while my Lyra is being looked at.... - hifitommy 20:40:11 10/20/18 (0)
  • RE: Using an AT95e while my Lyra is being looked at.... - John-from Seattle 18:12:45 10/20/18 (0)
  • Send it over here, I'll do more than look at the thing. - beach cruiser 17:18:12 10/20/18 (0)
  • I also like cheap mm cartridges - Cuernavaca 16:34:11 10/20/18 (0)
  • RE: Using an AT95e while my Lyra is being looked at.... - hesson11 16:28:59 10/20/18 (0)
  • I'm a member of the cheap cartridge club, too. - ghost of olddude55 16:26:21 10/20/18 (23)
    • it's not just you.....or maybe it's me too - NuWave 10:04:06 10/24/18 (2)
      • The ATs can sound lush if the capacitance is in range. - ghost of olddude55 17:19:40 10/24/18 (1)
        • RE: The ATs can sound lush if the capacitance is in range. - NuWave 15:01:14 10/25/18 (0)
    • RE: I'm a member of the cheap cartridge club, too. - jrtrent 07:24:44 10/21/18 (0)
    • Too bad. Properly set up, a $39 AT-95e will bury the Black./nt\ - Opus 33 1/3 05:12:26 10/21/18 (18)
      • Of course, I could just use those knobs on the pre-amp... - ghost of olddude55 07:30:14 10/21/18 (17)
        • Would have to be night vs day improved to approach the AT, IMHO. /nt\ - Opus 33 1/3 05:33:55 10/22/18 (16)
          • Just might be. - ghost of olddude55 06:38:36 10/22/18 (15)
            • RE: Just might be. - John-from Seattle 12:45:44 10/22/18 (14)
              • What do you have VTF set at? - ghost of olddude55 12:47:50 10/22/18 (13)
                • RE: What do you have VTF set at? - flood2 17:48:55 10/23/18 (0)
                • RE: What do you have VTF set at? - John-from Seattle 13:01:21 10/22/18 (11)
                  • The Shure scale is just as accurate as digital. - ghost of olddude55 13:30:17 10/22/18 (10)
                    • RE: The Shure scale is just as accurate as digital. - John-from Seattle 13:34:38 10/22/18 (9)
                      • RE: The Shure scale is just as accurate as digital. - Dave B 06:09:16 10/23/18 (8)
                        • Not my experience. - ghost of olddude55 02:49:16 10/24/18 (2)
                          • RE: Not my experience. - Dave B 04:46:49 10/24/18 (1)
                            • Oh, I think you've got an axe alright... - ghost of olddude55 15:38:22 10/24/18 (0)
                        • This was my experience too! - Joe Backer 17:19:43 10/23/18 (0)
                        • RE: The Shure scale is just as accurate as digital. - John-from Seattle 06:52:51 10/23/18 (3)
                          • Don't get spendy. - ghost of olddude55 03:19:07 10/24/18 (2)
                            • RE: Don't get spendy. - John-from Seattle 05:43:54 10/24/18 (0)
                            • RE: Don't get spendy. - BillH 05:43:15 10/24/18 (0)

Threads started on or before 5/15/07 are archived Here.
Threads started on or before 5/10/07 are archived Here.
Threads started on or before 4/30/07 are archived Here.
Threads started on or before 4/25/07 are archived Here.
Threads started on or before 4/18/07 are archived Here.

---

[ Top of Page ] [ Contact Us ] [ Support/Wish List ] [ Copyright © 2018, Audio Asylum, all rights reserved ] [ Take5 ]

---

[ General ] [ Speakers ] [ Tubes ] [ Vinyl ] [ Digital ] [ Hi-Rez ] [ Video Asylum ] [ Cables ] [ Tweaks/DIY ] [ Music ] [ Films ]

---