|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: CD clock posted by Alex Yakovlev on October 30, 2003 at 05:57:01:
Back in the bad old days when I had a Wadia DAC I used any number of players as a transport. To make a player work well you have to realize that in the front end of any player or transport the signal is Analog! Yes, a high frequency multi-phase analog signal. In other words RF! RF can be made better in a number of ways. I would first work on the main power supply, and then regulate (and add large value filter caps to it) the power to the laser driver IC and servo IC. Next, regulate the main processor where the digital out comes from. Then, improve the grounds by replacing thin jumper wires with fat wires. Last, put something heavy on top of the player, I used my pre-amp. After that you are stuck looking for a good RF cable to go to your DAC. That's another story.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: CD clock - bobwire 07:20:53 10/31/03 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
