|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
Normally a metal tonearm will act like a shield for its internal wiring. But when I must select a kind of wiring for my diy carbon or balsa arm, what would be the right choice, when I think about the need for shielding?I thought about some sort of very thin microphone cable: two thin internal leads with one copper shielding mantle around them. Both of the 2 cartridge ground connections would be connected to the shield.
Or is it possible to use the normal unshielded four thin wires without running risk of hum etc. even when there is no metal tube to prevent excessive hum?
I plan to use a normal MM cartridge on this arm.
This post is made possible by the generous support of people like you and our sponsors:
Topic - Shielding of internal tonearm wiring - hybris 23:49:30 10/19/03 (9)
- Re: Shielding of internal tonearm wiring - krishu 00:06:05 10/22/03 (6)
- Re: Shielding of internal tonearm wiring - hybris 02:29:07 10/22/03 (5)
- Balsa - krishu 04:40:49 10/22/03 (4)
- Ho yes, Balsa works - Owen 10:39:48 10/24/03 (1)
- Re: Ho yes, Balsa works - hybris 08:00:05 10/25/03 (0)
- Re: Balsa - hybris 05:07:19 10/22/03 (1)
- Re: Balsa: Seems it works ;o) (nt) - krishu 05:30:53 10/22/03 (0)
- Re: Shielding of internal tonearm wiring - Panelhead 03:18:44 10/20/03 (1)
- Re: Shielding of internal tonearm wiring - hybris 04:10:41 10/20/03 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
