|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: veneer for DIY speakers posted by Rivman on April 29, 2003 at 12:31:58:
I used oak veneer 3/4" mdf for outer panels and 3/4" oak quarter round for all corners. Just cut the panels a little big (1/16" to 1/8") so that it is the quarter round that is brought down to the veneer surface not the other way around. I'll borrow a digital camera and post the finished results. PS I used a piece of solid oak for the base extending 3/4 to 5/8 all the way around. This protects the bottom edge of the veneer and adds stability.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: veneer for DIY speakers - WilHenry 09:44:16 05/01/03 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
