|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: Re: How do I connect the shield to the chassis? posted by Bill Fitzmaurice on April 1, 2003 at 05:32:31:
Thank you for your advice, I'll try to connect the shield in all possible ways.
The only thing I'm still not sure about is how to connect it to the chassis physically. Connecting the shield to pin 1 (on an XLR connector) seems difficult enough compared to a small wire, but I haven't got much idea how I can make the physical contact between the shield and the chassis (and pin 1 as suggested in Rane's notes).
I undestand the theory, just cannot see how it can be implemented in practice.As for the AC mains ground, I don't know if there is an RF bypass cap in the amps, but here in Japan wall sockets can only take two pronge plugs, so I suppose all equipment is design for these circumstances. (I have Accuphase and Luxman by the way).
Thanks in advance
Zozo
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: How do I connect the shield to the chassis? - Zozo 07:19:33 04/01/03 (1)
- Re: How do I connect the shield to the chassis? - Bill Fitzmaurice 10:46:39 04/01/03 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
