|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: solder paste? posted by onysony on March 12, 2003 at 07:14:50:
Solder paste....flux.....is intended for plumbing work. Do not use it on electrical/electonics work. It is corrosive! Only use a rosin based flux for electronics work. For that matter, only used a rosin core solder for electronics work. Seldom is it necessary to need any additional flux. If the items to be soldered are dirty clean them first with sandpaper, wire brush, and/or alcohol. When unsoldering it is often helpful to apply fresh solder first.
Good luck,
Russ
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: Warning!!! - Russ57 09:40:36 03/12/03 (1)
- Paste primer.. - John Escallier 11:26:21 03/12/03 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
