Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ.

---

[ Follow Ups ] Thread: [ Display  All  Email ] [ Tweakers' Asylum ]

---

[ Alert Moderator ]

---

Re: StillPoints ERS

Posted by pftaylor (A) on March 5, 2003 at 03:45:14

In Reply to: Re: StillPoints ERS posted by SFDude on March 4, 2003 at 13:23:13:

Originally, I cut the sheet(it really looks like a 100lb thick perforated piece of cloth with a piece of grey paper inside)into quarters.

For the power cords, I will cut into eighths and tape around the end which plugs into my gear. Since everything runs off the P600 Powerplant, I initially think this would be the best way, but who knows with this stuff - its so powerful that a small piece goes a long way and there's no manual to tell you the "best" way.

Anyway, the eighth section rolled around the power cord forms a sheath-like section tucked behind the plug end so there really isn't any chance of fire hazard.

Regarding your question about lining your gear on the inside, I suppose you could but why? Its much simpler to lay the sheet down on the equipment's outer case and experiment with changing placement until you get what you are looking for.

I've emailed Clark Johnsen(wrote the original review in PF)looking for additioanl placement insight and he states that you should use ERS on "Anything digital. And probably a full sheet is too much. Cut one into halves, another into quarters, and a couple of those into eighths."

I trust this helps...

This post is made possible by the generous support of people like you and our sponsors:

Signature Sound

[ Signature Sound Lounge ]

---

[ Top of Page ] [ Contact Us ] [ Support/Wish List ] [ Copyright © 2025, Audio Asylum, all rights reserved ]

---

[ General ] [ Speakers ] [ Tubes ] [ Vinyl ] [ Digital ] [ Hi-Rez ] [ Video Asylum ] [ Cables ] [ Tweaks/DIY ] [ Music ] [ Films ]

---