|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: Re: Tuning for the ROOM! posted by Bill Fitzmaurice on January 9, 2003 at 09:32:16:
Yea, I was figuring "levels" had something to do with the noise.
The Rane accepts -10 unbalanced and +4 balanced (same on output). The gear between the Rane is -10.
I bought the Ebtech Line Level Shifter, which changes -10 and +4 levels, and converts balanced & unbalanced, and also serves as an isolation transformer, breaking ground loops (which isn't a problem I'm having.)
I have to make up some special cables to get it going, but, I believe raising the input to +4 will help lower the noise level in the final stages.
Thanks for your input.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: Tuning for the ROOM! - JTMusic 09:30:01 01/14/03 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
