Problem: Remote Signal Conflicts

Tweakers' Asylum

Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ.

I recently installed a Xantech remote extender system allowing use of remote controls through a closed cabinet. This allowed me to bring out my audio system remote that I hadn't used in years. Now I find I have command conflicts; the Parasound receiver turns on/off with remote commands to the TC/cable box or DVD player, the Zenith VCR turns on/off with volume command to receiver, etc. The obvious culprit is my old Parasound DR65 receiver (used as preamp) which seems to have a very nondiscriminating remote command code. Anyone know a way out of this short of disconnecting the Parasound from the Xantech system?

This post is made possible by the generous support of people like you and our sponsors:

VH Audio

Topic - Problem: Remote Signal Conflicts - DWPC 11:45:40 01/03/03 (3)

what remote are you using.... - Sam M 13:50:05 01/03/03 (2)

All of 'em! (shopping for a universal) NT - DWPC 14:25:10 01/03/03 (1)

if you are shopping for a universal.... - Sam M 18:01:18 01/03/03 (0)

You can not post to an archived thread.