|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: Hafler DH 500 Offset And Bias Adjustments. posted by Cougar on December 7, 2002 at 19:06:02:
P1 for DC is near the edge of the board and is adjusted to 0 at the speaker output.P2 for bias is near the center of the board and is adjusted to 350mA with one fuse pulled and the meter across the empty fuseholder.
Repeat both for the other channel.
Line current will be about 2A.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: Hafler DH 500 Offset And Bias Adjustments. - djk 01:08:02 12/08/02 (5)
- Re: Hafler DH 500 Offset And Bias Adjustments. - Cougar 07:28:39 12/08/02 (4)
- Re: Hafler DH 500 Offset And Bias Adjustments. - Davey 07:52:36 12/08/02 (3)
- Re: Hafler DH 500 Offset And Bias Adjustments. - Cougar 11:29:25 12/08/02 (2)
- Re: Hafler DH 500 Offset And Bias Adjustments. - djk 23:37:35 12/08/02 (1)
- Thank You T Everyone! nt. - Cougar 07:45:20 12/09/02 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
