|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: I have a 1A,12V Voltage Reg(TO220) with Vin Min15-Max35 posted by wheezer on August 26, 2002 at 12:44:26:
Hi Mitch, you'd expect the 240VAC load current to be half the 120V load current. Are we still talking the 120/240 autotransformer? If so, the bottom line is you'd have to make sure the autotransformer winding is good for the higher 120V current rating. The 240V line output from the trannie should measure about half the current in the 120V input line.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Transport Load with Autotransformer(?) - cfraser 10:37:11 08/27/02 (4)
- Re: Transport Load with Autotransformer(?) - wheezer 11:06:38 08/27/02 (1)
- I'm confused again - cfraser 11:52:08 08/27/02 (0)
- Re: Transport Load with Autotransformer(?) - wheezer 10:57:47 08/27/02 (1)
- Re: Transport Load with Autotransformer(?) - wheezer 11:03:44 08/27/02 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
