|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: can someone give me structural advice on these record shelves I built posted by Rob M on June 14, 2002 at 08:47:43:
The redeeming aspect of your design is that it is narrow and the shelves are not likely to sag.If there is a problem, it is where it is most likely with the bottom shelf. The bottom shelf is carrying the full load and it is being suspended above the casters. The easiest adjustment is to add a 1X1 or 1X2 on edge along the front and rear edges of the bottom shelf. You may want to mount the casters on plywood blocks that are glued to the bottom shelf.
In the future as much glue as possible. MDF is notorious for not holding fasteners. Be wary of moving the cabinet by the sides!
DaveT
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- structural advice on these record shelves - DaveT 14:07:26 06/14/02 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
