|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: Re: ART DIO dead , please help posted by dlowman on April 15, 2002 at 18:08:05:
If you can locate the lifted/damaged trace that is not making contact with whatever the component you installed, you can de-solder the component, gingerly put the trace back in its place, and re-solder the component to ensure conductivity. Well, it's easier said than done. I've had couple of broken traces and couldn't repair one. So I had to solder some scrap wire directly between the two components. Some of these are thinner than your hair, so you will have to really look closely.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: ART DIO dead , please help - dormant 20:24:10 04/15/02 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
