|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: 100K "hair-trigger" volume pot posted by ronnieferrell on April 10, 2002 at 06:33:08:
Take the 100K resistor and rout it from signal to ground. (You're just made a voltage divider and dumped some of the signal from the preamp. You've also dropped the input impedance of the amp, so your pre might not like the extra current demand. If it doesn't not, put another resistor in series with the signal. Play with the value until you like what you hear.(If someone already suggested this, sorry to waste the bandwidth.)
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Do this, should work, just tried it myself with clip leads... - Velo74 22:05:52 04/10/02 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
