|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: Voltage rating of PSU electrolytic posted by Glenn2 on April 8, 2002 at 15:04:18:
Most likely the voltage shown on the schematic is the average voltage not the repetitive peak value. Depending on the ripple on the PS rail you may be approaching the 25V. Also you should measure it not necessarily trust the schematic.If you exceed the voltage, electrolytics will spew their innards all over the rest of the insides. Messy. 35 volt caps are cheap insurance.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: Voltage rating of PSU electrolytic - Gepetto 20:26:57 04/08/02 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
