|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: Advise sough - Litz wire from Surplus Sales posted by Sh on March 20, 2002 at 06:00:47:
I have heard that Toulene is a good solvent for dissolving varnish. Just submerge the areas of the wire you want the varnished removed. I would think about 1/2" if you inserting it into solderless spade connectors. After the toulene I would immerse it in Lemon juice and then in tomato juice and see if you set a nice shinny copper look then crimp the end strands tightly and tin with solder. A pencil eraser is a good cleaner to scrape the varnish off with. The solvent alone is not gona hack it. Its gona take elbow grease. Cordially James
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Getting the varnish off! - j.l.guillebeau@att.net 16:52:44 03/20/02 (1)
- Careful with toluene! - csown 21:08:02 03/20/02 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
