|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: spectacular! posted by Julie's husband on March 18, 2002 at 18:51:58:
Hi Julie's Husband,Thanks for the kind words. I sourced the case from Par-Metal. They can be found on the web at www.par-metal.com and have very reasonable prices.
I cut all the holes on the rear case plate myself. It is relatively thin aluminum. I turned to a local machine shop to cut the three holes in the thicker front faceplate. These were just too much for my meager tool collection.
All in all the chassis work was not that difficult with very acceptable results.
I hope this helps.
Mark R.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: spectacular! - MHR 04:44:05 03/19/02 (1)
- Thanks for the tips! (NT) - eagle1 06:15:23 03/19/02 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
