|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: Re: How do you measure Diodes with a DVM/Multimeter? posted by mikedale on February 25, 2002 at 08:34:32:
>This is why modern multimeters have a seperate diode test position which actually measures the voltage drop (not the resistance) across the diode when a test voltage is applied to itThe voltage drop should be the same as the test voltage, regardless of polarity, so that's probably not what's being measured. However, significant current flow only exists in one direction.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: How do you measure Diodes with a DVM/Multimeter? - Corbett 10:17:34 02/25/02 (1)
- Re: How do you measure Diodes with a DVM/Multimeter? - . 02:50:40 02/26/02 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
