![]() |
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: AC cord swap for powered subwoofer posted by Wrenchhead on January 3, 2002 at 18:40:01:
My last message was a worst case scenario.
If you let 250W go out into the room,
You will be seriously hurt and the windows
will all blow out.
A more reasonable level, a few watts.
In fact a comforable listen level mostly
require no more than 1Watt. Ask the `tube-men`!Suppose 25Watts or so in consumtion
gives
220VAC 0.1A - AWG32 resistans: 0.005 ohms/m
110VAC 0.2A - AWG29 resistans: 0.0024 "-Best regards, groman.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: AC cord swap for powered subwoofer - groman 19:32:15 01/03/02 (6)
- Re: AC cord swap for powered subwoofer - Wrenchhead 19:56:57 01/03/02 (5)
- Re: AC cord swap for powered subwoofer - groman 20:40:40 01/03/02 (4)
- Re: AC cord swap for powered subwoofer - Wrenchhead 03:53:08 01/04/02 (1)
- Re: AC cord swap for powered subwoofer - groman 06:24:43 01/04/02 (0)
- Re: AC cord swap for powered subwoofer - Benoit 01:17:41 01/04/02 (1)
- Dynamic power - groman 06:49:03 01/04/02 (0)