|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: NHT 1.5 crossover mod? posted by csown on December 20, 2001 at 06:31:09:
Crossover modifications usually involve upgrade/replacement of capacitors, resistors, and inductors. Existing caps (especially if they're electrolytics) can be replaced with upgraded film types like Solen, Auricap, MIT, or Hovland. Resistor replacements should be non-inductive. Mills, Eagle, and Ohmite are good candidates. You can also replace inductors (coils) but new ones should have the same resistance (within an ohm) as well as the same inductance as the originals. Use air core for best results, although if space prohibits air cores, steel laminate can be used.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: NHT 1.5 crossover mod? - R. Hertz 12:44:33 12/20/01 (2)
- Thx - csown 21:59:02 12/20/01 (1)
- if you can... - chiggy 07:28:10 12/21/01 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
