![]() |
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
I'm going to build up new xover networks for my Tannoy m3 but i cannot get the right DCR of inductive coil in Thailand.
a. low pass, series wired to woofer, as specified is 1mh, 0.26DCR --- but intend to use 1mh, 0.36 DCR
b. high pass, paralle wired to tweeter, as specified is 0.18mh, 0.68DCR--- but intend to use 0.18mh, 0.4DCR
c. the original coil is very thin copper wire-- intend to use bigger copper wire.Anybody came across this, please kindly suggest me know whether there is any big effect on the sounding of my tannoy m3 compared to the originally specified DCR in the m3 schematics.
thanks in advance
Katechai
This post is made possible by the generous support of people like you and our sponsors:
Topic - DCR of inductive coil for network - katechai 20:05:35 09/12/01 (2)
- Re: DCR of inductive coil for network - R. Hertz 20:12:46 09/12/01 (1)
- Re: DCR of inductive coil for network - pkell44 17:31:40 09/16/01 (0)