|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: Crossover Design posted by Yoav on September 8, 2001 at 13:55:29:
The accuton tweeter units do not like to go too low, and the tweeter components seem to go down fairly low.Try reducing the size of C1, from 8.2 uF down to 6.8 uF, if that helps, but is still not all the way there, then try reducing L1 a bit.
Without any specific comments on how it sounds to you, it is hard to say what to do to "make it better".
If you have a "hole in the middle" of the response, it may be that L2 is just too big. Paper calculations are all very well and fine, but the bottom line is what works.
Jon Risch
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: Crossover Design - Jon Risch 07:26:20 09/09/01 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]